checkbashisms: freeze> python -m pip freeze --all buildcontroller: install_deps> python -I -m pip install 'setuptools>=7.0' -r /w/workspace/transportpce-tox-verify-transportpce-master/tests/requirements.txt -r /w/workspace/transportpce-tox-verify-transportpce-master/tests/test-requirements.txt docs-linkcheck: install_deps> python -I -m pip install -r docs/requirements.txt docs: install_deps> python -I -m pip install -r docs/requirements.txt checkbashisms: pip==25.2,setuptools==80.9.0 checkbashisms: commands[0] /w/workspace/transportpce-tox-verify-transportpce-master/tests> ./fixCIcentOS8reposMirrors.sh checkbashisms: commands[1] /w/workspace/transportpce-tox-verify-transportpce-master/tests> sh -c 'command checkbashisms>/dev/null || sudo yum install -y devscripts-checkbashisms || sudo yum install -y devscripts-minimal || sudo yum install -y devscripts || sudo yum install -y https://archives.fedoraproject.org/pub/archive/fedora/linux/releases/31/Everything/x86_64/os/Packages/d/devscripts-checkbashisms-2.19.6-2.fc31.x86_64.rpm || (echo "checkbashisms command not found - please install it (e.g. sudo apt-get install devscripts | yum install devscripts-minimal )" >&2 && exit 1)' checkbashisms: commands[2] /w/workspace/transportpce-tox-verify-transportpce-master/tests> find . -not -path '*/\.*' -name '*.sh' -exec checkbashisms -f '{}' + checkbashisms: OK ✔ in 3.14 seconds pre-commit: install_deps> python -I -m pip install pre-commit pre-commit: freeze> python -m pip freeze --all pre-commit: cfgv==3.4.0,distlib==0.4.0,filelock==3.20.0,identify==2.6.15,nodeenv==1.9.1,pip==25.2,platformdirs==4.5.0,pre_commit==4.3.0,PyYAML==6.0.3,setuptools==80.9.0,virtualenv==20.35.3 pre-commit: commands[0] /w/workspace/transportpce-tox-verify-transportpce-master/tests> ./fixCIcentOS8reposMirrors.sh pre-commit: commands[1] /w/workspace/transportpce-tox-verify-transportpce-master/tests> sh -c 'which cpan || sudo yum install -y perl-CPAN || (echo "cpan command not found - please install it (e.g. sudo apt-get install perl-modules | yum install perl-CPAN )" >&2 && exit 1)' /usr/bin/cpan pre-commit: commands[2] /w/workspace/transportpce-tox-verify-transportpce-master/tests> pre-commit run --all-files --show-diff-on-failure [WARNING] hook id `remove-tabs` uses deprecated stage names (commit) which will be removed in a future version. run: `pre-commit migrate-config` to automatically fix this. [WARNING] hook id `perltidy` uses deprecated stage names (commit) which will be removed in a future version. run: `pre-commit migrate-config` to automatically fix this. [INFO] Initializing environment for https://github.com/pre-commit/pre-commit-hooks. [WARNING] repo `https://github.com/pre-commit/pre-commit-hooks` uses deprecated stage names (commit, push) which will be removed in a future version. Hint: often `pre-commit autoupdate --repo https://github.com/pre-commit/pre-commit-hooks` will fix this. if it does not -- consider reporting an issue to that repo. [INFO] Initializing environment for https://github.com/jorisroovers/gitlint. [INFO] Initializing environment for https://github.com/jorisroovers/gitlint:./gitlint-core[trusted-deps]. [INFO] Initializing environment for https://github.com/Lucas-C/pre-commit-hooks. [INFO] Initializing environment for https://github.com/pre-commit/mirrors-autopep8. [INFO] Initializing environment for https://github.com/perltidy/perltidy. buildcontroller: freeze> python -m pip freeze --all buildcontroller: bcrypt==5.0.0,certifi==2025.10.5,cffi==2.0.0,charset-normalizer==3.4.4,cryptography==46.0.3,dict2xml==1.7.7,idna==3.11,iniconfig==2.3.0,invoke==2.2.1,lxml==6.0.2,netconf-client==3.5.0,packaging==25.0,paramiko==4.0.0,pip==25.2,pluggy==1.6.0,psutil==7.1.2,pycparser==2.23,Pygments==2.19.2,PyNaCl==1.6.0,pytest==8.4.2,requests==2.32.5,setuptools==80.9.0,urllib3==2.5.0 buildcontroller: commands[0] /w/workspace/transportpce-tox-verify-transportpce-master/tests> ./build_controller.sh java-1.11.0-openjdk-amd64 1111 /usr/lib/jvm/java-1.11.0-openjdk-amd64 java-1.17.0-openjdk-amd64 1711 /usr/lib/jvm/java-1.17.0-openjdk-amd64 java-1.21.0-openjdk-amd64 2111 /usr/lib/jvm/java-1.21.0-openjdk-amd64 [INFO] Installing environment for https://github.com/pre-commit/pre-commit-hooks. [INFO] Once installed this environment will be reused. [INFO] This may take a few minutes... 21 21 ok, java is 21 or newer Apache Maven 3.9.11 (3e54c93a704957b63ee3494413a2b544fd3d825b) Maven home: /opt/maven Java version: 21.0.8, vendor: Ubuntu, runtime: /usr/lib/jvm/java-21-openjdk-amd64 Default locale: en, platform encoding: UTF-8 OS name: "linux", version: "5.15.0-153-generic", arch: "amd64", family: "unix" [INFO] Installing environment for https://github.com/Lucas-C/pre-commit-hooks. [INFO] Once installed this environment will be reused. [INFO] This may take a few minutes... [INFO] Installing environment for https://github.com/pre-commit/mirrors-autopep8. [INFO] Once installed this environment will be reused. [INFO] This may take a few minutes... [INFO] Installing environment for https://github.com/perltidy/perltidy. [INFO] Once installed this environment will be reused. [INFO] This may take a few minutes... docs-linkcheck: freeze> python -m pip freeze --all docs: freeze> python -m pip freeze --all docs-linkcheck: alabaster==1.0.0,attrs==25.4.0,babel==2.17.0,blockdiag==3.0.0,certifi==2025.10.5,charset-normalizer==3.4.4,contourpy==1.3.3,cycler==0.12.1,docutils==0.21.2,fonttools==4.60.1,funcparserlib==2.0.0a0,future==1.0.0,idna==3.11,imagesize==1.4.1,Jinja2==3.1.6,jsonschema==3.2.0,kiwisolver==1.4.9,lfdocs-conf==0.9.0,MarkupSafe==3.0.3,matplotlib==3.10.7,numpy==2.3.4,nwdiag==3.0.0,packaging==25.0,pillow==12.0.0,pip==25.2,Pygments==2.19.2,pyparsing==3.2.5,pyrsistent==0.20.0,python-dateutil==2.9.0.post0,PyYAML==6.0.3,requests==2.32.5,requests-file==1.5.1,roman-numerals-py==3.1.0,seqdiag==3.0.0,setuptools==80.9.0,six==1.17.0,snowballstemmer==3.0.1,Sphinx==8.2.3,sphinx-bootstrap-theme==0.8.1,sphinx-data-viewer==0.1.5,sphinx-rtd-theme==3.0.2,sphinx-tabs==3.4.7,sphinxcontrib-applehelp==2.0.0,sphinxcontrib-blockdiag==3.0.0,sphinxcontrib-devhelp==2.0.0,sphinxcontrib-htmlhelp==2.1.0,sphinxcontrib-jquery==4.1,sphinxcontrib-jsmath==1.0.1,sphinxcontrib-needs==0.7.9,sphinxcontrib-nwdiag==2.0.0,sphinxcontrib-plantuml==0.31,sphinxcontrib-qthelp==2.0.0,sphinxcontrib-seqdiag==3.0.0,sphinxcontrib-serializinghtml==2.0.0,sphinxcontrib-swaggerdoc==0.1.7,urllib3==2.5.0,webcolors==24.11.1 docs-linkcheck: commands[0] /w/workspace/transportpce-tox-verify-transportpce-master/tests> sphinx-build -q -b linkcheck -d /w/workspace/transportpce-tox-verify-transportpce-master/.tox/docs-linkcheck/tmp/doctrees ../docs/ /w/workspace/transportpce-tox-verify-transportpce-master/docs/_build/linkcheck docs: alabaster==1.0.0,attrs==25.4.0,babel==2.17.0,blockdiag==3.0.0,certifi==2025.10.5,charset-normalizer==3.4.4,contourpy==1.3.3,cycler==0.12.1,docutils==0.21.2,fonttools==4.60.1,funcparserlib==2.0.0a0,future==1.0.0,idna==3.11,imagesize==1.4.1,Jinja2==3.1.6,jsonschema==3.2.0,kiwisolver==1.4.9,lfdocs-conf==0.9.0,MarkupSafe==3.0.3,matplotlib==3.10.7,numpy==2.3.4,nwdiag==3.0.0,packaging==25.0,pillow==12.0.0,pip==25.2,Pygments==2.19.2,pyparsing==3.2.5,pyrsistent==0.20.0,python-dateutil==2.9.0.post0,PyYAML==6.0.3,requests==2.32.5,requests-file==1.5.1,roman-numerals-py==3.1.0,seqdiag==3.0.0,setuptools==80.9.0,six==1.17.0,snowballstemmer==3.0.1,Sphinx==8.2.3,sphinx-bootstrap-theme==0.8.1,sphinx-data-viewer==0.1.5,sphinx-rtd-theme==3.0.2,sphinx-tabs==3.4.7,sphinxcontrib-applehelp==2.0.0,sphinxcontrib-blockdiag==3.0.0,sphinxcontrib-devhelp==2.0.0,sphinxcontrib-htmlhelp==2.1.0,sphinxcontrib-jquery==4.1,sphinxcontrib-jsmath==1.0.1,sphinxcontrib-needs==0.7.9,sphinxcontrib-nwdiag==2.0.0,sphinxcontrib-plantuml==0.31,sphinxcontrib-qthelp==2.0.0,sphinxcontrib-seqdiag==3.0.0,sphinxcontrib-serializinghtml==2.0.0,sphinxcontrib-swaggerdoc==0.1.7,urllib3==2.5.0,webcolors==24.11.1 docs: commands[0] /w/workspace/transportpce-tox-verify-transportpce-master/tests> sphinx-build -q -W --keep-going -b html -n -d /w/workspace/transportpce-tox-verify-transportpce-master/.tox/docs/tmp/doctrees ../docs/ /w/workspace/transportpce-tox-verify-transportpce-master/docs/_build/html docs: OK ✔ in 31.43 seconds pylint: install_deps> python -I -m pip install 'pylint>=2.6.0' docs-linkcheck: OK ✔ in 32.14 seconds pylint: freeze> python -m pip freeze --all pylint: astroid==4.0.1,dill==0.4.0,isort==7.0.0,mccabe==0.7.0,pip==25.2,platformdirs==4.5.0,pylint==4.0.2,setuptools==80.9.0,tomlkit==0.13.3 pylint: commands[0] /w/workspace/transportpce-tox-verify-transportpce-master/tests> find transportpce_tests/ -name '*.py' -exec pylint --fail-under=10 --max-line-length=120 --disable=missing-docstring,import-error --disable=fixme --disable=duplicate-code '--module-rgx=([a-z0-9_]+$)|([0-9.]{1,30}$)' '--method-rgx=(([a-z_][a-zA-Z0-9_]{2,})|(_[a-z0-9_]*)|(__[a-zA-Z][a-zA-Z0-9_]+__))$' '--variable-rgx=[a-zA-Z_][a-zA-Z0-9_]{1,30}$' '{}' + trim trailing whitespace.................................................Passed Tabs remover.............................................................Passed autopep8.................................................................Passed perltidy.................................................................Passed pre-commit: commands[3] /w/workspace/transportpce-tox-verify-transportpce-master/tests> pre-commit run gitlint-ci --hook-stage manual [WARNING] hook id `remove-tabs` uses deprecated stage names (commit) which will be removed in a future version. run: `pre-commit migrate-config` to automatically fix this. [WARNING] hook id `perltidy` uses deprecated stage names (commit) which will be removed in a future version. run: `pre-commit migrate-config` to automatically fix this. [INFO] Installing environment for https://github.com/jorisroovers/gitlint. [INFO] Once installed this environment will be reused. [INFO] This may take a few minutes... gitlint..................................................................Passed ------------------------------------ Your code has been rated at 10.00/10 [ERROR] COMPILATION ERROR : [ERROR] /w/workspace/transportpce-tox-verify-transportpce-master/pce/src/main/java/org/opendaylight/transportpce/pce/networkanalyzer/PceOtnNode.java:[634,5] illegal start of expression [ERROR] Failed to execute goal org.apache.maven.plugins:maven-compiler-plugin:3.14.1:compile (default-compile) on project transportpce-pce: Compilation failure [ERROR] /w/workspace/transportpce-tox-verify-transportpce-master/pce/src/main/java/org/opendaylight/transportpce/pce/networkanalyzer/PceOtnNode.java:[634,5] illegal start of expression [ERROR] -> [Help 1] [ERROR] [ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch. [ERROR] Re-run Maven using the -X switch to enable full debug logging. [ERROR] [ERROR] For more information about the errors and possible solutions, please read the following articles: [ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/MojoFailureException [ERROR] [ERROR] After correcting the problems, you can resume the build with the command [ERROR] mvn -rf :transportpce-pce pre-commit: OK ✔ in 55.21 seconds pylint: OK ✔ in 29.68 seconds buildcontroller: exit 1 (66.31 seconds) /w/workspace/transportpce-tox-verify-transportpce-master/tests> ./build_controller.sh pid=2702 buildcontroller: FAIL ✖ in 1 minute 16.16 seconds build_karaf_tests190: install_deps> python -I -m pip install 'setuptools>=7.0' -r /w/workspace/transportpce-tox-verify-transportpce-master/tests/requirements.txt -r /w/workspace/transportpce-tox-verify-transportpce-master/tests/test-requirements.txt build_karaf_tests221: install_deps> python -I -m pip install 'setuptools>=7.0' -r /w/workspace/transportpce-tox-verify-transportpce-master/tests/requirements.txt -r /w/workspace/transportpce-tox-verify-transportpce-master/tests/test-requirements.txt build_karaf_tests121: install_deps> python -I -m pip install 'setuptools>=7.0' -r /w/workspace/transportpce-tox-verify-transportpce-master/tests/requirements.txt -r /w/workspace/transportpce-tox-verify-transportpce-master/tests/test-requirements.txt build_karaf_tests71: install_deps> python -I -m pip install 'setuptools>=7.0' -r /w/workspace/transportpce-tox-verify-transportpce-master/tests/requirements.txt -r /w/workspace/transportpce-tox-verify-transportpce-master/tests/test-requirements.txt build_karaf_tests190: freeze> python -m pip freeze --all build_karaf_tests221: freeze> python -m pip freeze --all build_karaf_tests121: freeze> python -m pip freeze --all build_karaf_tests71: freeze> python -m pip freeze --all build_karaf_tests190: bcrypt==5.0.0,certifi==2025.10.5,cffi==2.0.0,charset-normalizer==3.4.4,cryptography==46.0.3,dict2xml==1.7.7,idna==3.11,iniconfig==2.3.0,invoke==2.2.1,lxml==6.0.2,netconf-client==3.5.0,packaging==25.0,paramiko==4.0.0,pip==25.2,pluggy==1.6.0,psutil==7.1.2,pycparser==2.23,Pygments==2.19.2,PyNaCl==1.6.0,pytest==8.4.2,requests==2.32.5,setuptools==80.9.0,urllib3==2.5.0 build_karaf_tests190: commands[0] /w/workspace/transportpce-tox-verify-transportpce-master/tests> ./build_karaf_for_tests.sh build karaf in karafoc with ./karafoc.env build_karaf_tests221: bcrypt==5.0.0,certifi==2025.10.5,cffi==2.0.0,charset-normalizer==3.4.4,cryptography==46.0.3,dict2xml==1.7.7,idna==3.11,iniconfig==2.3.0,invoke==2.2.1,lxml==6.0.2,netconf-client==3.5.0,packaging==25.0,paramiko==4.0.0,pip==25.2,pluggy==1.6.0,psutil==7.1.2,pycparser==2.23,Pygments==2.19.2,PyNaCl==1.6.0,pytest==8.4.2,requests==2.32.5,setuptools==80.9.0,urllib3==2.5.0 build_karaf_tests221: commands[0] /w/workspace/transportpce-tox-verify-transportpce-master/tests> ./build_karaf_for_tests.sh build karaf in karaf221 with ./karaf221.env build_karaf_tests121: bcrypt==5.0.0,certifi==2025.10.5,cffi==2.0.0,charset-normalizer==3.4.4,cryptography==46.0.3,dict2xml==1.7.7,idna==3.11,iniconfig==2.3.0,invoke==2.2.1,lxml==6.0.2,netconf-client==3.5.0,packaging==25.0,paramiko==4.0.0,pip==25.2,pluggy==1.6.0,psutil==7.1.2,pycparser==2.23,Pygments==2.19.2,PyNaCl==1.6.0,pytest==8.4.2,requests==2.32.5,setuptools==80.9.0,urllib3==2.5.0 build_karaf_tests121: commands[0] /w/workspace/transportpce-tox-verify-transportpce-master/tests> ./build_karaf_for_tests.sh build_karaf_tests71: bcrypt==5.0.0,certifi==2025.10.5,cffi==2.0.0,charset-normalizer==3.4.4,cryptography==46.0.3,dict2xml==1.7.7,idna==3.11,iniconfig==2.3.0,invoke==2.2.1,lxml==6.0.2,netconf-client==3.5.0,packaging==25.0,paramiko==4.0.0,pip==25.2,pluggy==1.6.0,psutil==7.1.2,pycparser==2.23,Pygments==2.19.2,PyNaCl==1.6.0,pytest==8.4.2,requests==2.32.5,setuptools==80.9.0,urllib3==2.5.0 build_karaf_tests71: commands[0] /w/workspace/transportpce-tox-verify-transportpce-master/tests> ./build_karaf_for_tests.sh build karaf in karaf71 with ./karaf71.env build karaf in karaf121 with ./karaf121.env build_karaf_tests221: OK ✔ in 1 minute 8.77 seconds buildlighty: install_deps> python -I -m pip install 'setuptools>=7.0' -r /w/workspace/transportpce-tox-verify-transportpce-master/tests/requirements.txt -r /w/workspace/transportpce-tox-verify-transportpce-master/tests/test-requirements.txt build_karaf_tests71: OK ✔ in 1 minute 10.77 seconds sims: install_deps> python -I -m pip install 'setuptools>=7.0' -r /w/workspace/transportpce-tox-verify-transportpce-master/tests/requirements.txt -r /w/workspace/transportpce-tox-verify-transportpce-master/tests/test-requirements.txt build_karaf_tests190: OK ✔ in 1 minute 13.12 seconds build_karaf_tests121: OK ✔ in 1 minute 14.65 seconds testsPCE: install_deps> python -I -m pip install gnpy4tpce==2.4.7 'setuptools>=7.0' -r /w/workspace/transportpce-tox-verify-transportpce-master/tests/requirements.txt -r /w/workspace/transportpce-tox-verify-transportpce-master/tests/test-requirements.txt buildlighty: freeze> python -m pip freeze --all sims: freeze> python -m pip freeze --all buildlighty: bcrypt==5.0.0,certifi==2025.10.5,cffi==2.0.0,charset-normalizer==3.4.4,cryptography==46.0.3,dict2xml==1.7.7,idna==3.11,iniconfig==2.3.0,invoke==2.2.1,lxml==6.0.2,netconf-client==3.5.0,packaging==25.0,paramiko==4.0.0,pip==25.2,pluggy==1.6.0,psutil==7.1.2,pycparser==2.23,Pygments==2.19.2,PyNaCl==1.6.0,pytest==8.4.2,requests==2.32.5,setuptools==80.9.0,urllib3==2.5.0 buildlighty: commands[0] /w/workspace/transportpce-tox-verify-transportpce-master/lighty> ./build.sh sims: bcrypt==5.0.0,certifi==2025.10.5,cffi==2.0.0,charset-normalizer==3.4.4,cryptography==46.0.3,dict2xml==1.7.7,idna==3.11,iniconfig==2.3.0,invoke==2.2.1,lxml==6.0.2,netconf-client==3.5.0,packaging==25.0,paramiko==4.0.0,pip==25.2,pluggy==1.6.0,psutil==7.1.2,pycparser==2.23,Pygments==2.19.2,PyNaCl==1.6.0,pytest==8.4.2,requests==2.32.5,setuptools==80.9.0,urllib3==2.5.0 sims: commands[0] /w/workspace/transportpce-tox-verify-transportpce-master/tests> ./install_lightynode.sh Using lighynode version 20.1.0.5 Installing lightynode device to ./lightynode/lightynode-openroadm-device directory sims: OK ✔ in 12.68 seconds buildlighty: OK ✔ in 36.99 seconds testsPCE: freeze> python -m pip freeze --all testsPCE: bcrypt==5.0.0,certifi==2025.10.5,cffi==2.0.0,charset-normalizer==3.4.4,click==8.3.0,contourpy==1.3.3,cryptography==3.3.2,cycler==0.12.1,dict2xml==1.7.7,Flask==2.1.3,Flask-Injector==0.14.0,fonttools==4.60.1,gnpy4tpce==2.4.7,idna==3.11,iniconfig==2.3.0,injector==0.22.0,invoke==2.2.1,itsdangerous==2.2.0,Jinja2==3.1.6,kiwisolver==1.4.9,lxml==6.0.2,MarkupSafe==3.0.3,matplotlib==3.10.7,netconf-client==3.5.0,networkx==2.8.8,numpy==1.26.4,packaging==25.0,pandas==1.5.3,paramiko==4.0.0,pbr==5.11.1,pillow==12.0.0,pip==25.2,pluggy==1.6.0,psutil==7.1.2,pycparser==2.23,Pygments==2.19.2,PyNaCl==1.6.0,pyparsing==3.2.5,pytest==8.4.2,python-dateutil==2.9.0.post0,pytz==2025.2,requests==2.32.5,scipy==1.16.2,setuptools==50.3.2,six==1.17.0,urllib3==2.5.0,Werkzeug==2.0.3,xlrd==1.2.0 testsPCE: commands[0] /w/workspace/transportpce-tox-verify-transportpce-master/tests> ./launch_tests.sh pce pytest -q transportpce_tests/pce/test01_pce.py EEEEEEEEEEEEEEEEEEEE [100%] ==================================== ERRORS ==================================== _______ ERROR at setup of TestTransportPCEPce.test_01_load_port_mapping ________ cls = @classmethod def setUpClass(cls): # pylint: disable=bare-except sample_files_parsed = False time.sleep(20) try: TOPO_BI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "honeynode-topo.json") with open(TOPO_BI_DIR_FILE, 'r', encoding='utf-8') as topo_bi_dir: cls.simple_topo_bi_dir_data = topo_bi_dir.read() TOPO_UNI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-simple-topology.json") with open(TOPO_UNI_DIR_FILE, 'r', encoding='utf-8') as topo_uni_dir: cls.simple_topo_uni_dir_data = topo_uni_dir.read() TOPO_UNI_DIR_COMPLEX_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-for-test-5-4.json") with open(TOPO_UNI_DIR_COMPLEX_FILE, 'r', encoding='utf-8') as topo_uni_dir_complex: cls.complex_topo_uni_dir_data = topo_uni_dir_complex.read() PORT_MAPPING_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "pce_portmapping_121.json") with open(PORT_MAPPING_FILE, 'r', encoding='utf-8') as port_mapping: cls.port_mapping_data = port_mapping.read() sample_files_parsed = True except PermissionError as err: print("Permission Error when trying to read sample files\n", err) sys.exit(2) except FileNotFoundError as err: print("File Not found Error when trying to read sample files\n", err) sys.exit(2) except: print("Unexpected error when trying to read sample files\n", sys.exc_info()[0]) sys.exit(2) finally: if sample_files_parsed: print("sample files content loaded") > cls.processes = test_utils.start_tpce() ^^^^^^^^^^^^^^^^^^^^^^^ transportpce_tests/pce/test01_pce.py:93: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ def start_tpce(): if 'NO_ODL_STARTUP' in os.environ: print('No OpenDaylight instance to start!') return [] print('starting OpenDaylight...') if 'USE_LIGHTY' in os.environ and os.environ['USE_LIGHTY'] == 'True': process = start_lighty() else: process = start_karaf() if wait_until_log_contains(TPCE_LOG, [LIGHTY_OK_START_MSG, KARAF_OK_START_MSG], time_to_wait=100): print('OpenDaylight started !') else: print('OpenDaylight failed to start !') shutdown_process(process) for pid in process_list: shutdown_process(pid) > sys.exit(1) E SystemExit: 1 transportpce_tests/common/test_utils.py:232: SystemExit ---------------------------- Captured stdout setup ----------------------------- sample files content loaded starting OpenDaylight... starting KARAF (karaf) TransportPCE build... Pattern not found after 100 seconds! OpenDaylight failed to start ! ____ ERROR at setup of TestTransportPCEPce.test_02_load_simple_topology_bi _____ cls = @classmethod def setUpClass(cls): # pylint: disable=bare-except sample_files_parsed = False time.sleep(20) try: TOPO_BI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "honeynode-topo.json") with open(TOPO_BI_DIR_FILE, 'r', encoding='utf-8') as topo_bi_dir: cls.simple_topo_bi_dir_data = topo_bi_dir.read() TOPO_UNI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-simple-topology.json") with open(TOPO_UNI_DIR_FILE, 'r', encoding='utf-8') as topo_uni_dir: cls.simple_topo_uni_dir_data = topo_uni_dir.read() TOPO_UNI_DIR_COMPLEX_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-for-test-5-4.json") with open(TOPO_UNI_DIR_COMPLEX_FILE, 'r', encoding='utf-8') as topo_uni_dir_complex: cls.complex_topo_uni_dir_data = topo_uni_dir_complex.read() PORT_MAPPING_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "pce_portmapping_121.json") with open(PORT_MAPPING_FILE, 'r', encoding='utf-8') as port_mapping: cls.port_mapping_data = port_mapping.read() sample_files_parsed = True except PermissionError as err: print("Permission Error when trying to read sample files\n", err) sys.exit(2) except FileNotFoundError as err: print("File Not found Error when trying to read sample files\n", err) sys.exit(2) except: print("Unexpected error when trying to read sample files\n", sys.exc_info()[0]) sys.exit(2) finally: if sample_files_parsed: print("sample files content loaded") > cls.processes = test_utils.start_tpce() ^^^^^^^^^^^^^^^^^^^^^^^ transportpce_tests/pce/test01_pce.py:93: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ def start_tpce(): if 'NO_ODL_STARTUP' in os.environ: print('No OpenDaylight instance to start!') return [] print('starting OpenDaylight...') if 'USE_LIGHTY' in os.environ and os.environ['USE_LIGHTY'] == 'True': process = start_lighty() else: process = start_karaf() if wait_until_log_contains(TPCE_LOG, [LIGHTY_OK_START_MSG, KARAF_OK_START_MSG], time_to_wait=100): print('OpenDaylight started !') else: print('OpenDaylight failed to start !') shutdown_process(process) for pid in process_list: shutdown_process(pid) > sys.exit(1) E SystemExit: 1 transportpce_tests/common/test_utils.py:232: SystemExit ---------------------------- Captured stdout setup ----------------------------- sample files content loaded starting OpenDaylight... starting KARAF (karaf) TransportPCE build... Pattern not found after 100 seconds! OpenDaylight failed to start ! ___________ ERROR at setup of TestTransportPCEPce.test_03_get_nodeId ___________ cls = @classmethod def setUpClass(cls): # pylint: disable=bare-except sample_files_parsed = False time.sleep(20) try: TOPO_BI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "honeynode-topo.json") with open(TOPO_BI_DIR_FILE, 'r', encoding='utf-8') as topo_bi_dir: cls.simple_topo_bi_dir_data = topo_bi_dir.read() TOPO_UNI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-simple-topology.json") with open(TOPO_UNI_DIR_FILE, 'r', encoding='utf-8') as topo_uni_dir: cls.simple_topo_uni_dir_data = topo_uni_dir.read() TOPO_UNI_DIR_COMPLEX_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-for-test-5-4.json") with open(TOPO_UNI_DIR_COMPLEX_FILE, 'r', encoding='utf-8') as topo_uni_dir_complex: cls.complex_topo_uni_dir_data = topo_uni_dir_complex.read() PORT_MAPPING_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "pce_portmapping_121.json") with open(PORT_MAPPING_FILE, 'r', encoding='utf-8') as port_mapping: cls.port_mapping_data = port_mapping.read() sample_files_parsed = True except PermissionError as err: print("Permission Error when trying to read sample files\n", err) sys.exit(2) except FileNotFoundError as err: print("File Not found Error when trying to read sample files\n", err) sys.exit(2) except: print("Unexpected error when trying to read sample files\n", sys.exc_info()[0]) sys.exit(2) finally: if sample_files_parsed: print("sample files content loaded") > cls.processes = test_utils.start_tpce() ^^^^^^^^^^^^^^^^^^^^^^^ transportpce_tests/pce/test01_pce.py:93: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ def start_tpce(): if 'NO_ODL_STARTUP' in os.environ: print('No OpenDaylight instance to start!') return [] print('starting OpenDaylight...') if 'USE_LIGHTY' in os.environ and os.environ['USE_LIGHTY'] == 'True': process = start_lighty() else: process = start_karaf() if wait_until_log_contains(TPCE_LOG, [LIGHTY_OK_START_MSG, KARAF_OK_START_MSG], time_to_wait=100): print('OpenDaylight started !') else: print('OpenDaylight failed to start !') shutdown_process(process) for pid in process_list: shutdown_process(pid) > sys.exit(1) E SystemExit: 1 transportpce_tests/common/test_utils.py:232: SystemExit ---------------------------- Captured stdout setup ----------------------------- sample files content loaded starting OpenDaylight... starting KARAF (karaf) TransportPCE build... Pattern not found after 100 seconds! OpenDaylight failed to start ! ___________ ERROR at setup of TestTransportPCEPce.test_04_get_linkId ___________ cls = @classmethod def setUpClass(cls): # pylint: disable=bare-except sample_files_parsed = False time.sleep(20) try: TOPO_BI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "honeynode-topo.json") with open(TOPO_BI_DIR_FILE, 'r', encoding='utf-8') as topo_bi_dir: cls.simple_topo_bi_dir_data = topo_bi_dir.read() TOPO_UNI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-simple-topology.json") with open(TOPO_UNI_DIR_FILE, 'r', encoding='utf-8') as topo_uni_dir: cls.simple_topo_uni_dir_data = topo_uni_dir.read() TOPO_UNI_DIR_COMPLEX_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-for-test-5-4.json") with open(TOPO_UNI_DIR_COMPLEX_FILE, 'r', encoding='utf-8') as topo_uni_dir_complex: cls.complex_topo_uni_dir_data = topo_uni_dir_complex.read() PORT_MAPPING_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "pce_portmapping_121.json") with open(PORT_MAPPING_FILE, 'r', encoding='utf-8') as port_mapping: cls.port_mapping_data = port_mapping.read() sample_files_parsed = True except PermissionError as err: print("Permission Error when trying to read sample files\n", err) sys.exit(2) except FileNotFoundError as err: print("File Not found Error when trying to read sample files\n", err) sys.exit(2) except: print("Unexpected error when trying to read sample files\n", sys.exc_info()[0]) sys.exit(2) finally: if sample_files_parsed: print("sample files content loaded") > cls.processes = test_utils.start_tpce() ^^^^^^^^^^^^^^^^^^^^^^^ transportpce_tests/pce/test01_pce.py:93: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ def start_tpce(): if 'NO_ODL_STARTUP' in os.environ: print('No OpenDaylight instance to start!') return [] print('starting OpenDaylight...') if 'USE_LIGHTY' in os.environ and os.environ['USE_LIGHTY'] == 'True': process = start_lighty() else: process = start_karaf() if wait_until_log_contains(TPCE_LOG, [LIGHTY_OK_START_MSG, KARAF_OK_START_MSG], time_to_wait=100): print('OpenDaylight started !') else: print('OpenDaylight failed to start !') shutdown_process(process) for pid in process_list: shutdown_process(pid) > sys.exit(1) E SystemExit: 1 transportpce_tests/common/test_utils.py:232: SystemExit ---------------------------- Captured stdout setup ----------------------------- sample files content loaded starting OpenDaylight... starting KARAF (karaf) TransportPCE build... Pattern not found after 100 seconds! OpenDaylight failed to start ! ____ ERROR at setup of TestTransportPCEPce.test_05_path_computation_xpdr_bi ____ cls = @classmethod def setUpClass(cls): # pylint: disable=bare-except sample_files_parsed = False time.sleep(20) try: TOPO_BI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "honeynode-topo.json") with open(TOPO_BI_DIR_FILE, 'r', encoding='utf-8') as topo_bi_dir: cls.simple_topo_bi_dir_data = topo_bi_dir.read() TOPO_UNI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-simple-topology.json") with open(TOPO_UNI_DIR_FILE, 'r', encoding='utf-8') as topo_uni_dir: cls.simple_topo_uni_dir_data = topo_uni_dir.read() TOPO_UNI_DIR_COMPLEX_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-for-test-5-4.json") with open(TOPO_UNI_DIR_COMPLEX_FILE, 'r', encoding='utf-8') as topo_uni_dir_complex: cls.complex_topo_uni_dir_data = topo_uni_dir_complex.read() PORT_MAPPING_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "pce_portmapping_121.json") with open(PORT_MAPPING_FILE, 'r', encoding='utf-8') as port_mapping: cls.port_mapping_data = port_mapping.read() sample_files_parsed = True except PermissionError as err: print("Permission Error when trying to read sample files\n", err) sys.exit(2) except FileNotFoundError as err: print("File Not found Error when trying to read sample files\n", err) sys.exit(2) except: print("Unexpected error when trying to read sample files\n", sys.exc_info()[0]) sys.exit(2) finally: if sample_files_parsed: print("sample files content loaded") > cls.processes = test_utils.start_tpce() ^^^^^^^^^^^^^^^^^^^^^^^ transportpce_tests/pce/test01_pce.py:93: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ def start_tpce(): if 'NO_ODL_STARTUP' in os.environ: print('No OpenDaylight instance to start!') return [] print('starting OpenDaylight...') if 'USE_LIGHTY' in os.environ and os.environ['USE_LIGHTY'] == 'True': process = start_lighty() else: process = start_karaf() if wait_until_log_contains(TPCE_LOG, [LIGHTY_OK_START_MSG, KARAF_OK_START_MSG], time_to_wait=100): print('OpenDaylight started !') else: print('OpenDaylight failed to start !') shutdown_process(process) for pid in process_list: shutdown_process(pid) > sys.exit(1) E SystemExit: 1 transportpce_tests/common/test_utils.py:232: SystemExit ---------------------------- Captured stdout setup ----------------------------- sample files content loaded starting OpenDaylight... starting KARAF (karaf) TransportPCE build... Pattern not found after 100 seconds! OpenDaylight failed to start ! ____ ERROR at setup of TestTransportPCEPce.test_06_path_computation_rdm_bi _____ cls = @classmethod def setUpClass(cls): # pylint: disable=bare-except sample_files_parsed = False time.sleep(20) try: TOPO_BI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "honeynode-topo.json") with open(TOPO_BI_DIR_FILE, 'r', encoding='utf-8') as topo_bi_dir: cls.simple_topo_bi_dir_data = topo_bi_dir.read() TOPO_UNI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-simple-topology.json") with open(TOPO_UNI_DIR_FILE, 'r', encoding='utf-8') as topo_uni_dir: cls.simple_topo_uni_dir_data = topo_uni_dir.read() TOPO_UNI_DIR_COMPLEX_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-for-test-5-4.json") with open(TOPO_UNI_DIR_COMPLEX_FILE, 'r', encoding='utf-8') as topo_uni_dir_complex: cls.complex_topo_uni_dir_data = topo_uni_dir_complex.read() PORT_MAPPING_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "pce_portmapping_121.json") with open(PORT_MAPPING_FILE, 'r', encoding='utf-8') as port_mapping: cls.port_mapping_data = port_mapping.read() sample_files_parsed = True except PermissionError as err: print("Permission Error when trying to read sample files\n", err) sys.exit(2) except FileNotFoundError as err: print("File Not found Error when trying to read sample files\n", err) sys.exit(2) except: print("Unexpected error when trying to read sample files\n", sys.exc_info()[0]) sys.exit(2) finally: if sample_files_parsed: print("sample files content loaded") > cls.processes = test_utils.start_tpce() ^^^^^^^^^^^^^^^^^^^^^^^ transportpce_tests/pce/test01_pce.py:93: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ def start_tpce(): if 'NO_ODL_STARTUP' in os.environ: print('No OpenDaylight instance to start!') return [] print('starting OpenDaylight...') if 'USE_LIGHTY' in os.environ and os.environ['USE_LIGHTY'] == 'True': process = start_lighty() else: process = start_karaf() if wait_until_log_contains(TPCE_LOG, [LIGHTY_OK_START_MSG, KARAF_OK_START_MSG], time_to_wait=100): print('OpenDaylight started !') else: print('OpenDaylight failed to start !') shutdown_process(process) for pid in process_list: shutdown_process(pid) > sys.exit(1) E SystemExit: 1 transportpce_tests/common/test_utils.py:232: SystemExit ---------------------------- Captured stdout setup ----------------------------- sample files content loaded starting OpenDaylight... starting KARAF (karaf) TransportPCE build... Pattern not found after 100 seconds! OpenDaylight failed to start ! ____ ERROR at setup of TestTransportPCEPce.test_07_load_simple_topology_uni ____ cls = @classmethod def setUpClass(cls): # pylint: disable=bare-except sample_files_parsed = False time.sleep(20) try: TOPO_BI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "honeynode-topo.json") with open(TOPO_BI_DIR_FILE, 'r', encoding='utf-8') as topo_bi_dir: cls.simple_topo_bi_dir_data = topo_bi_dir.read() TOPO_UNI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-simple-topology.json") with open(TOPO_UNI_DIR_FILE, 'r', encoding='utf-8') as topo_uni_dir: cls.simple_topo_uni_dir_data = topo_uni_dir.read() TOPO_UNI_DIR_COMPLEX_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-for-test-5-4.json") with open(TOPO_UNI_DIR_COMPLEX_FILE, 'r', encoding='utf-8') as topo_uni_dir_complex: cls.complex_topo_uni_dir_data = topo_uni_dir_complex.read() PORT_MAPPING_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "pce_portmapping_121.json") with open(PORT_MAPPING_FILE, 'r', encoding='utf-8') as port_mapping: cls.port_mapping_data = port_mapping.read() sample_files_parsed = True except PermissionError as err: print("Permission Error when trying to read sample files\n", err) sys.exit(2) except FileNotFoundError as err: print("File Not found Error when trying to read sample files\n", err) sys.exit(2) except: print("Unexpected error when trying to read sample files\n", sys.exc_info()[0]) sys.exit(2) finally: if sample_files_parsed: print("sample files content loaded") > cls.processes = test_utils.start_tpce() ^^^^^^^^^^^^^^^^^^^^^^^ transportpce_tests/pce/test01_pce.py:93: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ def start_tpce(): if 'NO_ODL_STARTUP' in os.environ: print('No OpenDaylight instance to start!') return [] print('starting OpenDaylight...') if 'USE_LIGHTY' in os.environ and os.environ['USE_LIGHTY'] == 'True': process = start_lighty() else: process = start_karaf() if wait_until_log_contains(TPCE_LOG, [LIGHTY_OK_START_MSG, KARAF_OK_START_MSG], time_to_wait=100): print('OpenDaylight started !') else: print('OpenDaylight failed to start !') shutdown_process(process) for pid in process_list: shutdown_process(pid) > sys.exit(1) E SystemExit: 1 transportpce_tests/common/test_utils.py:232: SystemExit ---------------------------- Captured stdout setup ----------------------------- sample files content loaded starting OpenDaylight... starting KARAF (karaf) TransportPCE build... Pattern not found after 100 seconds! OpenDaylight failed to start ! ___________ ERROR at setup of TestTransportPCEPce.test_08_get_nodeId ___________ cls = @classmethod def setUpClass(cls): # pylint: disable=bare-except sample_files_parsed = False time.sleep(20) try: TOPO_BI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "honeynode-topo.json") with open(TOPO_BI_DIR_FILE, 'r', encoding='utf-8') as topo_bi_dir: cls.simple_topo_bi_dir_data = topo_bi_dir.read() TOPO_UNI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-simple-topology.json") with open(TOPO_UNI_DIR_FILE, 'r', encoding='utf-8') as topo_uni_dir: cls.simple_topo_uni_dir_data = topo_uni_dir.read() TOPO_UNI_DIR_COMPLEX_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-for-test-5-4.json") with open(TOPO_UNI_DIR_COMPLEX_FILE, 'r', encoding='utf-8') as topo_uni_dir_complex: cls.complex_topo_uni_dir_data = topo_uni_dir_complex.read() PORT_MAPPING_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "pce_portmapping_121.json") with open(PORT_MAPPING_FILE, 'r', encoding='utf-8') as port_mapping: cls.port_mapping_data = port_mapping.read() sample_files_parsed = True except PermissionError as err: print("Permission Error when trying to read sample files\n", err) sys.exit(2) except FileNotFoundError as err: print("File Not found Error when trying to read sample files\n", err) sys.exit(2) except: print("Unexpected error when trying to read sample files\n", sys.exc_info()[0]) sys.exit(2) finally: if sample_files_parsed: print("sample files content loaded") > cls.processes = test_utils.start_tpce() ^^^^^^^^^^^^^^^^^^^^^^^ transportpce_tests/pce/test01_pce.py:93: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ def start_tpce(): if 'NO_ODL_STARTUP' in os.environ: print('No OpenDaylight instance to start!') return [] print('starting OpenDaylight...') if 'USE_LIGHTY' in os.environ and os.environ['USE_LIGHTY'] == 'True': process = start_lighty() else: process = start_karaf() if wait_until_log_contains(TPCE_LOG, [LIGHTY_OK_START_MSG, KARAF_OK_START_MSG], time_to_wait=100): print('OpenDaylight started !') else: print('OpenDaylight failed to start !') shutdown_process(process) for pid in process_list: shutdown_process(pid) > sys.exit(1) E SystemExit: 1 transportpce_tests/common/test_utils.py:232: SystemExit ---------------------------- Captured stdout setup ----------------------------- sample files content loaded starting OpenDaylight... starting KARAF (karaf) TransportPCE build... Pattern not found after 100 seconds! OpenDaylight failed to start ! ___________ ERROR at setup of TestTransportPCEPce.test_09_get_linkId ___________ cls = @classmethod def setUpClass(cls): # pylint: disable=bare-except sample_files_parsed = False time.sleep(20) try: TOPO_BI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "honeynode-topo.json") with open(TOPO_BI_DIR_FILE, 'r', encoding='utf-8') as topo_bi_dir: cls.simple_topo_bi_dir_data = topo_bi_dir.read() TOPO_UNI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-simple-topology.json") with open(TOPO_UNI_DIR_FILE, 'r', encoding='utf-8') as topo_uni_dir: cls.simple_topo_uni_dir_data = topo_uni_dir.read() TOPO_UNI_DIR_COMPLEX_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-for-test-5-4.json") with open(TOPO_UNI_DIR_COMPLEX_FILE, 'r', encoding='utf-8') as topo_uni_dir_complex: cls.complex_topo_uni_dir_data = topo_uni_dir_complex.read() PORT_MAPPING_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "pce_portmapping_121.json") with open(PORT_MAPPING_FILE, 'r', encoding='utf-8') as port_mapping: cls.port_mapping_data = port_mapping.read() sample_files_parsed = True except PermissionError as err: print("Permission Error when trying to read sample files\n", err) sys.exit(2) except FileNotFoundError as err: print("File Not found Error when trying to read sample files\n", err) sys.exit(2) except: print("Unexpected error when trying to read sample files\n", sys.exc_info()[0]) sys.exit(2) finally: if sample_files_parsed: print("sample files content loaded") > cls.processes = test_utils.start_tpce() ^^^^^^^^^^^^^^^^^^^^^^^ transportpce_tests/pce/test01_pce.py:93: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ def start_tpce(): if 'NO_ODL_STARTUP' in os.environ: print('No OpenDaylight instance to start!') return [] print('starting OpenDaylight...') if 'USE_LIGHTY' in os.environ and os.environ['USE_LIGHTY'] == 'True': process = start_lighty() else: process = start_karaf() if wait_until_log_contains(TPCE_LOG, [LIGHTY_OK_START_MSG, KARAF_OK_START_MSG], time_to_wait=100): print('OpenDaylight started !') else: print('OpenDaylight failed to start !') shutdown_process(process) for pid in process_list: shutdown_process(pid) > sys.exit(1) E SystemExit: 1 transportpce_tests/common/test_utils.py:232: SystemExit ---------------------------- Captured stdout setup ----------------------------- sample files content loaded starting OpenDaylight... starting KARAF (karaf) TransportPCE build... Pattern not found after 100 seconds! OpenDaylight failed to start ! ___ ERROR at setup of TestTransportPCEPce.test_10_path_computation_xpdr_uni ____ cls = @classmethod def setUpClass(cls): # pylint: disable=bare-except sample_files_parsed = False time.sleep(20) try: TOPO_BI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "honeynode-topo.json") with open(TOPO_BI_DIR_FILE, 'r', encoding='utf-8') as topo_bi_dir: cls.simple_topo_bi_dir_data = topo_bi_dir.read() TOPO_UNI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-simple-topology.json") with open(TOPO_UNI_DIR_FILE, 'r', encoding='utf-8') as topo_uni_dir: cls.simple_topo_uni_dir_data = topo_uni_dir.read() TOPO_UNI_DIR_COMPLEX_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-for-test-5-4.json") with open(TOPO_UNI_DIR_COMPLEX_FILE, 'r', encoding='utf-8') as topo_uni_dir_complex: cls.complex_topo_uni_dir_data = topo_uni_dir_complex.read() PORT_MAPPING_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "pce_portmapping_121.json") with open(PORT_MAPPING_FILE, 'r', encoding='utf-8') as port_mapping: cls.port_mapping_data = port_mapping.read() sample_files_parsed = True except PermissionError as err: print("Permission Error when trying to read sample files\n", err) sys.exit(2) except FileNotFoundError as err: print("File Not found Error when trying to read sample files\n", err) sys.exit(2) except: print("Unexpected error when trying to read sample files\n", sys.exc_info()[0]) sys.exit(2) finally: if sample_files_parsed: print("sample files content loaded") > cls.processes = test_utils.start_tpce() ^^^^^^^^^^^^^^^^^^^^^^^ transportpce_tests/pce/test01_pce.py:93: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ def start_tpce(): if 'NO_ODL_STARTUP' in os.environ: print('No OpenDaylight instance to start!') return [] print('starting OpenDaylight...') if 'USE_LIGHTY' in os.environ and os.environ['USE_LIGHTY'] == 'True': process = start_lighty() else: process = start_karaf() if wait_until_log_contains(TPCE_LOG, [LIGHTY_OK_START_MSG, KARAF_OK_START_MSG], time_to_wait=100): print('OpenDaylight started !') else: print('OpenDaylight failed to start !') shutdown_process(process) for pid in process_list: shutdown_process(pid) > sys.exit(1) E SystemExit: 1 transportpce_tests/common/test_utils.py:232: SystemExit ---------------------------- Captured stdout setup ----------------------------- sample files content loaded starting OpenDaylight... starting KARAF (karaf) TransportPCE build... Pattern not found after 100 seconds! OpenDaylight failed to start ! ____ ERROR at setup of TestTransportPCEPce.test_11_path_computation_rdm_uni ____ cls = @classmethod def setUpClass(cls): # pylint: disable=bare-except sample_files_parsed = False time.sleep(20) try: TOPO_BI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "honeynode-topo.json") with open(TOPO_BI_DIR_FILE, 'r', encoding='utf-8') as topo_bi_dir: cls.simple_topo_bi_dir_data = topo_bi_dir.read() TOPO_UNI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-simple-topology.json") with open(TOPO_UNI_DIR_FILE, 'r', encoding='utf-8') as topo_uni_dir: cls.simple_topo_uni_dir_data = topo_uni_dir.read() TOPO_UNI_DIR_COMPLEX_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-for-test-5-4.json") with open(TOPO_UNI_DIR_COMPLEX_FILE, 'r', encoding='utf-8') as topo_uni_dir_complex: cls.complex_topo_uni_dir_data = topo_uni_dir_complex.read() PORT_MAPPING_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "pce_portmapping_121.json") with open(PORT_MAPPING_FILE, 'r', encoding='utf-8') as port_mapping: cls.port_mapping_data = port_mapping.read() sample_files_parsed = True except PermissionError as err: print("Permission Error when trying to read sample files\n", err) sys.exit(2) except FileNotFoundError as err: print("File Not found Error when trying to read sample files\n", err) sys.exit(2) except: print("Unexpected error when trying to read sample files\n", sys.exc_info()[0]) sys.exit(2) finally: if sample_files_parsed: print("sample files content loaded") > cls.processes = test_utils.start_tpce() ^^^^^^^^^^^^^^^^^^^^^^^ transportpce_tests/pce/test01_pce.py:93: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ def start_tpce(): if 'NO_ODL_STARTUP' in os.environ: print('No OpenDaylight instance to start!') return [] print('starting OpenDaylight...') if 'USE_LIGHTY' in os.environ and os.environ['USE_LIGHTY'] == 'True': process = start_lighty() else: process = start_karaf() if wait_until_log_contains(TPCE_LOG, [LIGHTY_OK_START_MSG, KARAF_OK_START_MSG], time_to_wait=100): print('OpenDaylight started !') else: print('OpenDaylight failed to start !') shutdown_process(process) for pid in process_list: shutdown_process(pid) > sys.exit(1) E SystemExit: 1 transportpce_tests/common/test_utils.py:232: SystemExit ---------------------------- Captured stdout setup ----------------------------- sample files content loaded starting OpenDaylight... starting KARAF (karaf) TransportPCE build... Pattern not found after 100 seconds! OpenDaylight failed to start ! _____ ERROR at setup of TestTransportPCEPce.test_12_load_complex_topology ______ cls = @classmethod def setUpClass(cls): # pylint: disable=bare-except sample_files_parsed = False time.sleep(20) try: TOPO_BI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "honeynode-topo.json") with open(TOPO_BI_DIR_FILE, 'r', encoding='utf-8') as topo_bi_dir: cls.simple_topo_bi_dir_data = topo_bi_dir.read() TOPO_UNI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-simple-topology.json") with open(TOPO_UNI_DIR_FILE, 'r', encoding='utf-8') as topo_uni_dir: cls.simple_topo_uni_dir_data = topo_uni_dir.read() TOPO_UNI_DIR_COMPLEX_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-for-test-5-4.json") with open(TOPO_UNI_DIR_COMPLEX_FILE, 'r', encoding='utf-8') as topo_uni_dir_complex: cls.complex_topo_uni_dir_data = topo_uni_dir_complex.read() PORT_MAPPING_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "pce_portmapping_121.json") with open(PORT_MAPPING_FILE, 'r', encoding='utf-8') as port_mapping: cls.port_mapping_data = port_mapping.read() sample_files_parsed = True except PermissionError as err: print("Permission Error when trying to read sample files\n", err) sys.exit(2) except FileNotFoundError as err: print("File Not found Error when trying to read sample files\n", err) sys.exit(2) except: print("Unexpected error when trying to read sample files\n", sys.exc_info()[0]) sys.exit(2) finally: if sample_files_parsed: print("sample files content loaded") > cls.processes = test_utils.start_tpce() ^^^^^^^^^^^^^^^^^^^^^^^ transportpce_tests/pce/test01_pce.py:93: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ def start_tpce(): if 'NO_ODL_STARTUP' in os.environ: print('No OpenDaylight instance to start!') return [] print('starting OpenDaylight...') if 'USE_LIGHTY' in os.environ and os.environ['USE_LIGHTY'] == 'True': process = start_lighty() else: process = start_karaf() if wait_until_log_contains(TPCE_LOG, [LIGHTY_OK_START_MSG, KARAF_OK_START_MSG], time_to_wait=100): print('OpenDaylight started !') else: print('OpenDaylight failed to start !') shutdown_process(process) for pid in process_list: shutdown_process(pid) > sys.exit(1) E SystemExit: 1 transportpce_tests/common/test_utils.py:232: SystemExit ---------------------------- Captured stdout setup ----------------------------- sample files content loaded starting OpenDaylight... starting KARAF (karaf) TransportPCE build... Pattern not found after 100 seconds! OpenDaylight failed to start ! ___________ ERROR at setup of TestTransportPCEPce.test_13_get_nodeId ___________ cls = @classmethod def setUpClass(cls): # pylint: disable=bare-except sample_files_parsed = False time.sleep(20) try: TOPO_BI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "honeynode-topo.json") with open(TOPO_BI_DIR_FILE, 'r', encoding='utf-8') as topo_bi_dir: cls.simple_topo_bi_dir_data = topo_bi_dir.read() TOPO_UNI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-simple-topology.json") with open(TOPO_UNI_DIR_FILE, 'r', encoding='utf-8') as topo_uni_dir: cls.simple_topo_uni_dir_data = topo_uni_dir.read() TOPO_UNI_DIR_COMPLEX_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-for-test-5-4.json") with open(TOPO_UNI_DIR_COMPLEX_FILE, 'r', encoding='utf-8') as topo_uni_dir_complex: cls.complex_topo_uni_dir_data = topo_uni_dir_complex.read() PORT_MAPPING_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "pce_portmapping_121.json") with open(PORT_MAPPING_FILE, 'r', encoding='utf-8') as port_mapping: cls.port_mapping_data = port_mapping.read() sample_files_parsed = True except PermissionError as err: print("Permission Error when trying to read sample files\n", err) sys.exit(2) except FileNotFoundError as err: print("File Not found Error when trying to read sample files\n", err) sys.exit(2) except: print("Unexpected error when trying to read sample files\n", sys.exc_info()[0]) sys.exit(2) finally: if sample_files_parsed: print("sample files content loaded") > cls.processes = test_utils.start_tpce() ^^^^^^^^^^^^^^^^^^^^^^^ transportpce_tests/pce/test01_pce.py:93: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ def start_tpce(): if 'NO_ODL_STARTUP' in os.environ: print('No OpenDaylight instance to start!') return [] print('starting OpenDaylight...') if 'USE_LIGHTY' in os.environ and os.environ['USE_LIGHTY'] == 'True': process = start_lighty() else: process = start_karaf() if wait_until_log_contains(TPCE_LOG, [LIGHTY_OK_START_MSG, KARAF_OK_START_MSG], time_to_wait=100): print('OpenDaylight started !') else: print('OpenDaylight failed to start !') shutdown_process(process) for pid in process_list: shutdown_process(pid) > sys.exit(1) E SystemExit: 1 transportpce_tests/common/test_utils.py:232: SystemExit ---------------------------- Captured stdout setup ----------------------------- sample files content loaded starting OpenDaylight... starting KARAF (karaf) TransportPCE build... Pattern not found after 100 seconds! OpenDaylight failed to start ! _____ ERROR at setup of TestTransportPCEPce.test_14_fail_path_computation ______ cls = @classmethod def setUpClass(cls): # pylint: disable=bare-except sample_files_parsed = False time.sleep(20) try: TOPO_BI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "honeynode-topo.json") with open(TOPO_BI_DIR_FILE, 'r', encoding='utf-8') as topo_bi_dir: cls.simple_topo_bi_dir_data = topo_bi_dir.read() TOPO_UNI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-simple-topology.json") with open(TOPO_UNI_DIR_FILE, 'r', encoding='utf-8') as topo_uni_dir: cls.simple_topo_uni_dir_data = topo_uni_dir.read() TOPO_UNI_DIR_COMPLEX_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-for-test-5-4.json") with open(TOPO_UNI_DIR_COMPLEX_FILE, 'r', encoding='utf-8') as topo_uni_dir_complex: cls.complex_topo_uni_dir_data = topo_uni_dir_complex.read() PORT_MAPPING_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "pce_portmapping_121.json") with open(PORT_MAPPING_FILE, 'r', encoding='utf-8') as port_mapping: cls.port_mapping_data = port_mapping.read() sample_files_parsed = True except PermissionError as err: print("Permission Error when trying to read sample files\n", err) sys.exit(2) except FileNotFoundError as err: print("File Not found Error when trying to read sample files\n", err) sys.exit(2) except: print("Unexpected error when trying to read sample files\n", sys.exc_info()[0]) sys.exit(2) finally: if sample_files_parsed: print("sample files content loaded") > cls.processes = test_utils.start_tpce() ^^^^^^^^^^^^^^^^^^^^^^^ transportpce_tests/pce/test01_pce.py:93: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ def start_tpce(): if 'NO_ODL_STARTUP' in os.environ: print('No OpenDaylight instance to start!') return [] print('starting OpenDaylight...') if 'USE_LIGHTY' in os.environ and os.environ['USE_LIGHTY'] == 'True': process = start_lighty() else: process = start_karaf() if wait_until_log_contains(TPCE_LOG, [LIGHTY_OK_START_MSG, KARAF_OK_START_MSG], time_to_wait=100): print('OpenDaylight started !') else: print('OpenDaylight failed to start !') shutdown_process(process) for pid in process_list: shutdown_process(pid) > sys.exit(1) E SystemExit: 1 transportpce_tests/common/test_utils.py:232: SystemExit ---------------------------- Captured stdout setup ----------------------------- sample files content loaded starting OpenDaylight... starting KARAF (karaf) TransportPCE build... Pattern not found after 100 seconds! OpenDaylight failed to start ! ___ ERROR at setup of TestTransportPCEPce.test_15_success1_path_computation ____ cls = @classmethod def setUpClass(cls): # pylint: disable=bare-except sample_files_parsed = False time.sleep(20) try: TOPO_BI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "honeynode-topo.json") with open(TOPO_BI_DIR_FILE, 'r', encoding='utf-8') as topo_bi_dir: cls.simple_topo_bi_dir_data = topo_bi_dir.read() TOPO_UNI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-simple-topology.json") with open(TOPO_UNI_DIR_FILE, 'r', encoding='utf-8') as topo_uni_dir: cls.simple_topo_uni_dir_data = topo_uni_dir.read() TOPO_UNI_DIR_COMPLEX_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-for-test-5-4.json") with open(TOPO_UNI_DIR_COMPLEX_FILE, 'r', encoding='utf-8') as topo_uni_dir_complex: cls.complex_topo_uni_dir_data = topo_uni_dir_complex.read() PORT_MAPPING_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "pce_portmapping_121.json") with open(PORT_MAPPING_FILE, 'r', encoding='utf-8') as port_mapping: cls.port_mapping_data = port_mapping.read() sample_files_parsed = True except PermissionError as err: print("Permission Error when trying to read sample files\n", err) sys.exit(2) except FileNotFoundError as err: print("File Not found Error when trying to read sample files\n", err) sys.exit(2) except: print("Unexpected error when trying to read sample files\n", sys.exc_info()[0]) sys.exit(2) finally: if sample_files_parsed: print("sample files content loaded") > cls.processes = test_utils.start_tpce() ^^^^^^^^^^^^^^^^^^^^^^^ transportpce_tests/pce/test01_pce.py:93: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ def start_tpce(): if 'NO_ODL_STARTUP' in os.environ: print('No OpenDaylight instance to start!') return [] print('starting OpenDaylight...') if 'USE_LIGHTY' in os.environ and os.environ['USE_LIGHTY'] == 'True': process = start_lighty() else: process = start_karaf() if wait_until_log_contains(TPCE_LOG, [LIGHTY_OK_START_MSG, KARAF_OK_START_MSG], time_to_wait=100): print('OpenDaylight started !') else: print('OpenDaylight failed to start !') shutdown_process(process) for pid in process_list: shutdown_process(pid) > sys.exit(1) E SystemExit: 1 transportpce_tests/common/test_utils.py:232: SystemExit ---------------------------- Captured stdout setup ----------------------------- sample files content loaded starting OpenDaylight... starting KARAF (karaf) TransportPCE build... Pattern not found after 100 seconds! OpenDaylight failed to start ! ___ ERROR at setup of TestTransportPCEPce.test_16_success2_path_computation ____ cls = @classmethod def setUpClass(cls): # pylint: disable=bare-except sample_files_parsed = False time.sleep(20) try: TOPO_BI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "honeynode-topo.json") with open(TOPO_BI_DIR_FILE, 'r', encoding='utf-8') as topo_bi_dir: cls.simple_topo_bi_dir_data = topo_bi_dir.read() TOPO_UNI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-simple-topology.json") with open(TOPO_UNI_DIR_FILE, 'r', encoding='utf-8') as topo_uni_dir: cls.simple_topo_uni_dir_data = topo_uni_dir.read() TOPO_UNI_DIR_COMPLEX_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-for-test-5-4.json") with open(TOPO_UNI_DIR_COMPLEX_FILE, 'r', encoding='utf-8') as topo_uni_dir_complex: cls.complex_topo_uni_dir_data = topo_uni_dir_complex.read() PORT_MAPPING_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "pce_portmapping_121.json") with open(PORT_MAPPING_FILE, 'r', encoding='utf-8') as port_mapping: cls.port_mapping_data = port_mapping.read() sample_files_parsed = True except PermissionError as err: print("Permission Error when trying to read sample files\n", err) sys.exit(2) except FileNotFoundError as err: print("File Not found Error when trying to read sample files\n", err) sys.exit(2) except: print("Unexpected error when trying to read sample files\n", sys.exc_info()[0]) sys.exit(2) finally: if sample_files_parsed: print("sample files content loaded") > cls.processes = test_utils.start_tpce() ^^^^^^^^^^^^^^^^^^^^^^^ transportpce_tests/pce/test01_pce.py:93: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ def start_tpce(): if 'NO_ODL_STARTUP' in os.environ: print('No OpenDaylight instance to start!') return [] print('starting OpenDaylight...') if 'USE_LIGHTY' in os.environ and os.environ['USE_LIGHTY'] == 'True': process = start_lighty() else: process = start_karaf() if wait_until_log_contains(TPCE_LOG, [LIGHTY_OK_START_MSG, KARAF_OK_START_MSG], time_to_wait=100): print('OpenDaylight started !') else: print('OpenDaylight failed to start !') shutdown_process(process) for pid in process_list: shutdown_process(pid) > sys.exit(1) E SystemExit: 1 transportpce_tests/common/test_utils.py:232: SystemExit ---------------------------- Captured stdout setup ----------------------------- sample files content loaded starting OpenDaylight... starting KARAF (karaf) TransportPCE build... Pattern not found after 100 seconds! OpenDaylight failed to start ! ___ ERROR at setup of TestTransportPCEPce.test_17_success3_path_computation ____ cls = @classmethod def setUpClass(cls): # pylint: disable=bare-except sample_files_parsed = False time.sleep(20) try: TOPO_BI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "honeynode-topo.json") with open(TOPO_BI_DIR_FILE, 'r', encoding='utf-8') as topo_bi_dir: cls.simple_topo_bi_dir_data = topo_bi_dir.read() TOPO_UNI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-simple-topology.json") with open(TOPO_UNI_DIR_FILE, 'r', encoding='utf-8') as topo_uni_dir: cls.simple_topo_uni_dir_data = topo_uni_dir.read() TOPO_UNI_DIR_COMPLEX_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-for-test-5-4.json") with open(TOPO_UNI_DIR_COMPLEX_FILE, 'r', encoding='utf-8') as topo_uni_dir_complex: cls.complex_topo_uni_dir_data = topo_uni_dir_complex.read() PORT_MAPPING_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "pce_portmapping_121.json") with open(PORT_MAPPING_FILE, 'r', encoding='utf-8') as port_mapping: cls.port_mapping_data = port_mapping.read() sample_files_parsed = True except PermissionError as err: print("Permission Error when trying to read sample files\n", err) sys.exit(2) except FileNotFoundError as err: print("File Not found Error when trying to read sample files\n", err) sys.exit(2) except: print("Unexpected error when trying to read sample files\n", sys.exc_info()[0]) sys.exit(2) finally: if sample_files_parsed: print("sample files content loaded") > cls.processes = test_utils.start_tpce() ^^^^^^^^^^^^^^^^^^^^^^^ transportpce_tests/pce/test01_pce.py:93: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ def start_tpce(): if 'NO_ODL_STARTUP' in os.environ: print('No OpenDaylight instance to start!') return [] print('starting OpenDaylight...') if 'USE_LIGHTY' in os.environ and os.environ['USE_LIGHTY'] == 'True': process = start_lighty() else: process = start_karaf() if wait_until_log_contains(TPCE_LOG, [LIGHTY_OK_START_MSG, KARAF_OK_START_MSG], time_to_wait=100): print('OpenDaylight started !') else: print('OpenDaylight failed to start !') shutdown_process(process) for pid in process_list: shutdown_process(pid) > sys.exit(1) E SystemExit: 1 transportpce_tests/common/test_utils.py:232: SystemExit ---------------------------- Captured stdout setup ----------------------------- sample files content loaded starting OpenDaylight... starting KARAF (karaf) TransportPCE build... Pattern not found after 100 seconds! OpenDaylight failed to start ! _ ERROR at setup of TestTransportPCEPce.test_18_path_computation_before_oms_attribute_deletion _ cls = @classmethod def setUpClass(cls): # pylint: disable=bare-except sample_files_parsed = False time.sleep(20) try: TOPO_BI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "honeynode-topo.json") with open(TOPO_BI_DIR_FILE, 'r', encoding='utf-8') as topo_bi_dir: cls.simple_topo_bi_dir_data = topo_bi_dir.read() TOPO_UNI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-simple-topology.json") with open(TOPO_UNI_DIR_FILE, 'r', encoding='utf-8') as topo_uni_dir: cls.simple_topo_uni_dir_data = topo_uni_dir.read() TOPO_UNI_DIR_COMPLEX_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-for-test-5-4.json") with open(TOPO_UNI_DIR_COMPLEX_FILE, 'r', encoding='utf-8') as topo_uni_dir_complex: cls.complex_topo_uni_dir_data = topo_uni_dir_complex.read() PORT_MAPPING_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "pce_portmapping_121.json") with open(PORT_MAPPING_FILE, 'r', encoding='utf-8') as port_mapping: cls.port_mapping_data = port_mapping.read() sample_files_parsed = True except PermissionError as err: print("Permission Error when trying to read sample files\n", err) sys.exit(2) except FileNotFoundError as err: print("File Not found Error when trying to read sample files\n", err) sys.exit(2) except: print("Unexpected error when trying to read sample files\n", sys.exc_info()[0]) sys.exit(2) finally: if sample_files_parsed: print("sample files content loaded") > cls.processes = test_utils.start_tpce() ^^^^^^^^^^^^^^^^^^^^^^^ transportpce_tests/pce/test01_pce.py:93: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ def start_tpce(): if 'NO_ODL_STARTUP' in os.environ: print('No OpenDaylight instance to start!') return [] print('starting OpenDaylight...') if 'USE_LIGHTY' in os.environ and os.environ['USE_LIGHTY'] == 'True': process = start_lighty() else: process = start_karaf() if wait_until_log_contains(TPCE_LOG, [LIGHTY_OK_START_MSG, KARAF_OK_START_MSG], time_to_wait=100): print('OpenDaylight started !') else: print('OpenDaylight failed to start !') shutdown_process(process) for pid in process_list: shutdown_process(pid) > sys.exit(1) E SystemExit: 1 transportpce_tests/common/test_utils.py:232: SystemExit ---------------------------- Captured stdout setup ----------------------------- sample files content loaded starting OpenDaylight... starting KARAF (karaf) TransportPCE build... Pattern not found after 100 seconds! OpenDaylight failed to start ! _ ERROR at setup of TestTransportPCEPce.test_19_delete_oms_attribute_in_openroadm13toopenroadm12_link _ cls = @classmethod def setUpClass(cls): # pylint: disable=bare-except sample_files_parsed = False time.sleep(20) try: TOPO_BI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "honeynode-topo.json") with open(TOPO_BI_DIR_FILE, 'r', encoding='utf-8') as topo_bi_dir: cls.simple_topo_bi_dir_data = topo_bi_dir.read() TOPO_UNI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-simple-topology.json") with open(TOPO_UNI_DIR_FILE, 'r', encoding='utf-8') as topo_uni_dir: cls.simple_topo_uni_dir_data = topo_uni_dir.read() TOPO_UNI_DIR_COMPLEX_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-for-test-5-4.json") with open(TOPO_UNI_DIR_COMPLEX_FILE, 'r', encoding='utf-8') as topo_uni_dir_complex: cls.complex_topo_uni_dir_data = topo_uni_dir_complex.read() PORT_MAPPING_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "pce_portmapping_121.json") with open(PORT_MAPPING_FILE, 'r', encoding='utf-8') as port_mapping: cls.port_mapping_data = port_mapping.read() sample_files_parsed = True except PermissionError as err: print("Permission Error when trying to read sample files\n", err) sys.exit(2) except FileNotFoundError as err: print("File Not found Error when trying to read sample files\n", err) sys.exit(2) except: print("Unexpected error when trying to read sample files\n", sys.exc_info()[0]) sys.exit(2) finally: if sample_files_parsed: print("sample files content loaded") > cls.processes = test_utils.start_tpce() ^^^^^^^^^^^^^^^^^^^^^^^ transportpce_tests/pce/test01_pce.py:93: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ def start_tpce(): if 'NO_ODL_STARTUP' in os.environ: print('No OpenDaylight instance to start!') return [] print('starting OpenDaylight...') if 'USE_LIGHTY' in os.environ and os.environ['USE_LIGHTY'] == 'True': process = start_lighty() else: process = start_karaf() if wait_until_log_contains(TPCE_LOG, [LIGHTY_OK_START_MSG, KARAF_OK_START_MSG], time_to_wait=100): print('OpenDaylight started !') else: print('OpenDaylight failed to start !') shutdown_process(process) for pid in process_list: shutdown_process(pid) > sys.exit(1) E SystemExit: 1 transportpce_tests/common/test_utils.py:232: SystemExit ---------------------------- Captured stdout setup ----------------------------- sample files content loaded starting OpenDaylight... starting KARAF (karaf) TransportPCE build... Pattern not found after 100 seconds! OpenDaylight failed to start ! _ ERROR at setup of TestTransportPCEPce.test_20_path_computation_after_oms_attribute_deletion _ cls = @classmethod def setUpClass(cls): # pylint: disable=bare-except sample_files_parsed = False time.sleep(20) try: TOPO_BI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "honeynode-topo.json") with open(TOPO_BI_DIR_FILE, 'r', encoding='utf-8') as topo_bi_dir: cls.simple_topo_bi_dir_data = topo_bi_dir.read() TOPO_UNI_DIR_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-simple-topology.json") with open(TOPO_UNI_DIR_FILE, 'r', encoding='utf-8') as topo_uni_dir: cls.simple_topo_uni_dir_data = topo_uni_dir.read() TOPO_UNI_DIR_COMPLEX_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "NW-for-test-5-4.json") with open(TOPO_UNI_DIR_COMPLEX_FILE, 'r', encoding='utf-8') as topo_uni_dir_complex: cls.complex_topo_uni_dir_data = topo_uni_dir_complex.read() PORT_MAPPING_FILE = os.path.join(os.path.dirname(os.path.realpath(__file__)), "..", "..", "sample_configs", "pce_portmapping_121.json") with open(PORT_MAPPING_FILE, 'r', encoding='utf-8') as port_mapping: cls.port_mapping_data = port_mapping.read() sample_files_parsed = True except PermissionError as err: print("Permission Error when trying to read sample files\n", err) sys.exit(2) except FileNotFoundError as err: print("File Not found Error when trying to read sample files\n", err) sys.exit(2) except: print("Unexpected error when trying to read sample files\n", sys.exc_info()[0]) sys.exit(2) finally: if sample_files_parsed: print("sample files content loaded") > cls.processes = test_utils.start_tpce() ^^^^^^^^^^^^^^^^^^^^^^^ transportpce_tests/pce/test01_pce.py:93: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ def start_tpce(): if 'NO_ODL_STARTUP' in os.environ: print('No OpenDaylight instance to start!') return [] print('starting OpenDaylight...') if 'USE_LIGHTY' in os.environ and os.environ['USE_LIGHTY'] == 'True': process = start_lighty() else: process = start_karaf() if wait_until_log_contains(TPCE_LOG, [LIGHTY_OK_START_MSG, KARAF_OK_START_MSG], time_to_wait=100): print('OpenDaylight started !') else: print('OpenDaylight failed to start !') shutdown_process(process) for pid in process_list: shutdown_process(pid) > sys.exit(1) E SystemExit: 1 transportpce_tests/common/test_utils.py:232: SystemExit ---------------------------- Captured stdout setup ----------------------------- sample files content loaded starting OpenDaylight... starting KARAF (karaf) TransportPCE build... Pattern not found after 100 seconds! OpenDaylight failed to start ! =========================== short test summary info ============================ ERROR transportpce_tests/pce/test01_pce.py::TestTransportPCEPce::test_01_load_port_mapping ERROR transportpce_tests/pce/test01_pce.py::TestTransportPCEPce::test_02_load_simple_topology_bi ERROR transportpce_tests/pce/test01_pce.py::TestTransportPCEPce::test_03_get_nodeId ERROR transportpce_tests/pce/test01_pce.py::TestTransportPCEPce::test_04_get_linkId ERROR transportpce_tests/pce/test01_pce.py::TestTransportPCEPce::test_05_path_computation_xpdr_bi ERROR transportpce_tests/pce/test01_pce.py::TestTransportPCEPce::test_06_path_computation_rdm_bi ERROR transportpce_tests/pce/test01_pce.py::TestTransportPCEPce::test_07_load_simple_topology_uni ERROR transportpce_tests/pce/test01_pce.py::TestTransportPCEPce::test_08_get_nodeId ERROR transportpce_tests/pce/test01_pce.py::TestTransportPCEPce::test_09_get_linkId ERROR transportpce_tests/pce/test01_pce.py::TestTransportPCEPce::test_10_path_computation_xpdr_uni ERROR transportpce_tests/pce/test01_pce.py::TestTransportPCEPce::test_11_path_computation_rdm_uni ERROR transportpce_tests/pce/test01_pce.py::TestTransportPCEPce::test_12_load_complex_topology ERROR transportpce_tests/pce/test01_pce.py::TestTransportPCEPce::test_13_get_nodeId ERROR transportpce_tests/pce/test01_pce.py::TestTransportPCEPce::test_14_fail_path_computation ERROR transportpce_tests/pce/test01_pce.py::TestTransportPCEPce::test_15_success1_path_computation ERROR transportpce_tests/pce/test01_pce.py::TestTransportPCEPce::test_16_success2_path_computation ERROR transportpce_tests/pce/test01_pce.py::TestTransportPCEPce::test_17_success3_path_computation ERROR transportpce_tests/pce/test01_pce.py::TestTransportPCEPce::test_18_path_computation_before_oms_attribute_deletion ERROR transportpce_tests/pce/test01_pce.py::TestTransportPCEPce::test_19_delete_oms_attribute_in_openroadm13toopenroadm12_link ERROR transportpce_tests/pce/test01_pce.py::TestTransportPCEPce::test_20_path_computation_after_oms_attribute_deletion 20 errors in 2401.50s (0:40:01) testsPCE: exit 1 (2401.87 seconds) /w/workspace/transportpce-tox-verify-transportpce-master/tests> ./launch_tests.sh pce pid=4789 testsPCE: FAIL ✖ in 41 minutes 6.42 seconds tests_tapi: install_deps> python -I -m pip install 'setuptools>=7.0' -r /w/workspace/transportpce-tox-verify-transportpce-master/tests/requirements.txt -r /w/workspace/transportpce-tox-verify-transportpce-master/tests/test-requirements.txt tests121: install_deps> python -I -m pip install 'setuptools>=7.0' -r /w/workspace/transportpce-tox-verify-transportpce-master/tests/requirements.txt -r /w/workspace/transportpce-tox-verify-transportpce-master/tests/test-requirements.txt tests190: install_deps> python -I -m pip install 'setuptools>=7.0' -r /w/workspace/transportpce-tox-verify-transportpce-master/tests/requirements.txt -r /w/workspace/transportpce-tox-verify-transportpce-master/tests/test-requirements.txt tests190: freeze> python -m pip freeze --all tests_tapi: freeze> python -m pip freeze --all tests121: freeze> python -m pip freeze --all tests190: bcrypt==5.0.0,certifi==2025.10.5,cffi==2.0.0,charset-normalizer==3.4.4,cryptography==46.0.3,dict2xml==1.7.7,idna==3.11,iniconfig==2.3.0,invoke==2.2.1,lxml==6.0.2,netconf-client==3.5.0,packaging==25.0,paramiko==4.0.0,pip==25.2,pluggy==1.6.0,psutil==7.1.2,pycparser==2.23,Pygments==2.19.2,PyNaCl==1.6.0,pytest==8.4.2,requests==2.32.5,setuptools==80.9.0,urllib3==2.5.0 tests190: commands[0] /w/workspace/transportpce-tox-verify-transportpce-master/tests> ./launch_tests.sh oc using environment variables from ./karafoc.env pytest -q transportpce_tests/oc/test01_portmapping.py tests_tapi: bcrypt==5.0.0,certifi==2025.10.5,cffi==2.0.0,charset-normalizer==3.4.4,cryptography==46.0.3,dict2xml==1.7.7,idna==3.11,iniconfig==2.3.0,invoke==2.2.1,lxml==6.0.2,netconf-client==3.5.0,packaging==25.0,paramiko==4.0.0,pip==25.2,pluggy==1.6.0,psutil==7.1.2,pycparser==2.23,Pygments==2.19.2,PyNaCl==1.6.0,pytest==8.4.2,requests==2.32.5,setuptools==80.9.0,urllib3==2.5.0 tests_tapi: commands[0] /w/workspace/transportpce-tox-verify-transportpce-master/tests> ./launch_tests.sh tapi using environment variables from ./karaf221.env pytest -q transportpce_tests/tapi/test01_abstracted_topology.py tests121: bcrypt==5.0.0,certifi==2025.10.5,cffi==2.0.0,charset-normalizer==3.4.4,cryptography==46.0.3,dict2xml==1.7.7,idna==3.11,iniconfig==2.3.0,invoke==2.2.1,lxml==6.0.2,netconf-client==3.5.0,packaging==25.0,paramiko==4.0.0,pip==25.2,pluggy==1.6.0,psutil==7.1.2,pycparser==2.23,Pygments==2.19.2,PyNaCl==1.6.0,pytest==8.4.2,requests==2.32.5,setuptools==80.9.0,urllib3==2.5.0 tests121: commands[0] /w/workspace/transportpce-tox-verify-transportpce-master/tests> ./launch_tests.sh 1.2.1 using environment variables from ./karaf121.env pytest -q transportpce_tests/1.2.1/test01_portmapping.py ........... [100%] 10 passed in 82.70s (0:01:22) pytest -q transportpce_tests/oc/test02_topology.py .................................. [100%] 21 passed in 127.96s (0:02:07) pytest -q transportpce_tests/1.2.1/test02_topo_portmapping.py ................................. [100%] 6 passed in 50.57s pytest -q transportpce_tests/1.2.1/test03_topology.py ............................................................... [100%] 51 passed in 315.35s (0:05:15) pytest -q transportpce_tests/tapi/test02_full_topology.py [100%] 44 passed in 138.90s (0:02:18) pytest -q transportpce_tests/1.2.1/test04_renderer_service_path_nominal.py ..... [100%] 14 passed in 245.43s (0:04:05) pytest -q transportpce_tests/oc/test03_renderer.py .............................. [100%] 19 passed in 74.87s (0:01:14) tests190: OK ✔ in 6 minutes 52.42 seconds tests71: install_deps> python -I -m pip install 'setuptools>=7.0' -r /w/workspace/transportpce-tox-verify-transportpce-master/tests/requirements.txt -r /w/workspace/transportpce-tox-verify-transportpce-master/tests/test-requirements.txt .....tests71: freeze> python -m pip freeze --all tests71: bcrypt==5.0.0,certifi==2025.10.5,cffi==2.0.0,charset-normalizer==3.4.4,cryptography==46.0.3,dict2xml==1.7.7,idna==3.11,iniconfig==2.3.0,invoke==2.2.1,lxml==6.0.2,netconf-client==3.5.0,packaging==25.0,paramiko==4.0.0,pip==25.2,pluggy==1.6.0,psutil==7.1.2,pycparser==2.23,Pygments==2.19.2,PyNaCl==1.6.0,pytest==8.4.2,requests==2.32.5,setuptools==80.9.0,urllib3==2.5.0 tests71: commands[0] /w/workspace/transportpce-tox-verify-transportpce-master/tests> ./launch_tests.sh 7.1 using environment variables from ./karaf71.env pytest -q transportpce_tests/7.1/test01_portmapping.py ............... [100%] 24 passed in 116.18s (0:01:56) pytest -q transportpce_tests/1.2.1/test05_olm.py .................... [100%] 12 passed in 52.70s pytest -q transportpce_tests/7.1/test02_otn_renderer.py ................................................................................................................. [100%] 62 passed in 167.72s (0:02:47) pytest -q transportpce_tests/7.1/test03_renderer_or_modes.py .... [100%] 40 passed in 203.98s (0:03:23) pytest -q transportpce_tests/1.2.1/test06_end2end.py ....... [100%] 36 passed in 369.05s (0:06:09) pytest -q transportpce_tests/tapi/test03_tapi_device_change_notifications.py .................................................................................... [100%] 48 passed in 153.51s (0:02:33) pytest -q transportpce_tests/7.1/test04_renderer_regen_mode.py ........................................................ [100%] 22 passed in 74.66s (0:01:14) ................................................ [100%] 71 passed in 323.38s (0:05:23) pytest -q transportpce_tests/tapi/test04_topo_extension.py ...................... [100%] 19 passed in 321.85s (0:05:21) tests71: OK ✔ in 7 minutes 38.81 seconds tests_tapi: OK ✔ in 22 minutes 19.38 seconds tests221: install_deps> python -I -m pip install 'setuptools>=7.0' -r /w/workspace/transportpce-tox-verify-transportpce-master/tests/requirements.txt -r /w/workspace/transportpce-tox-verify-transportpce-master/tests/test-requirements.txt tests221: freeze> python -m pip freeze --all tests221: bcrypt==5.0.0,certifi==2025.10.5,cffi==2.0.0,charset-normalizer==3.4.4,cryptography==46.0.3,dict2xml==1.7.7,idna==3.11,iniconfig==2.3.0,invoke==2.2.1,lxml==6.0.2,netconf-client==3.5.0,packaging==25.0,paramiko==4.0.0,pip==25.2,pluggy==1.6.0,psutil==7.1.2,pycparser==2.23,Pygments==2.19.2,PyNaCl==1.6.0,pytest==8.4.2,requests==2.32.5,setuptools==80.9.0,urllib3==2.5.0 tests221: commands[0] /w/workspace/transportpce-tox-verify-transportpce-master/tests> ./launch_tests.sh 2.2.1 using environment variables from ./karaf221.env pytest -q transportpce_tests/2.2.1/test01_portmapping.py ........... [100%] 54 passed in 743.80s (0:12:23) ........................... [100%] 35 passed in 74.67s (0:01:14) pytest -q transportpce_tests/2.2.1/test02_topo_portmapping.py ...... [100%] 6 passed in 44.54s pytest -q transportpce_tests/2.2.1/test03_topology.py ............................................ [100%] 44 passed in 137.47s (0:02:17) pytest -q transportpce_tests/2.2.1/test04_otn_topology.py ............ [100%] 12 passed in 59.23s pytest -q transportpce_tests/2.2.1/test05_flex_grid.py ................ [100%] 16 passed in 114.72s (0:01:54) pytest -q transportpce_tests/2.2.1/test06_renderer_service_path_nominal.py ............................... [100%] 31 passed in 396.76s (0:06:36) pytest -q transportpce_tests/2.2.1/test07_otn_renderer.py .......................... [100%] 26 passed in 90.27s (0:01:30) pytest -q transportpce_tests/2.2.1/test08_otn_sh_renderer.py ...................... [100%] 22 passed in 99.48s (0:01:39) pytest -q transportpce_tests/2.2.1/test09_olm.py ........................................ [100%] 40 passed in 181.78s (0:03:01) pytest -q transportpce_tests/2.2.1/test11_otn_end2end.py ........................................................................ [ 74%] ......................... [100%] 97 passed in 491.47s (0:08:11) pytest -q transportpce_tests/2.2.1/test12_end2end.py ...................................................... [100%] 54 passed in 448.00s (0:07:27) pytest -q transportpce_tests/2.2.1/test14_otn_switch_end2end.py ........................................................................ [ 71%] ............................. [100%] 101 passed in 495.35s (0:08:15) pytest -q transportpce_tests/2.2.1/test15_otn_end2end_with_intermediate_switch.py ........................................................................ [ 67%] ................................... [100%] 107 passed in 602.58s (0:10:02) pytest -q transportpce_tests/2.2.1/test16_freq_end2end.py ............................................. [100%] 45 passed in 201.36s (0:03:21) tests121: OK ✔ in 23 minutes 11.82 seconds tests221: OK ✔ in 57 minutes 29.98 seconds tests_hybrid: install_deps> python -I -m pip install 'setuptools>=7.0' -r /w/workspace/transportpce-tox-verify-transportpce-master/tests/requirements.txt -r /w/workspace/transportpce-tox-verify-transportpce-master/tests/test-requirements.txt tests_hybrid: freeze> python -m pip freeze --all tests_hybrid: bcrypt==5.0.0,certifi==2025.10.5,cffi==2.0.0,charset-normalizer==3.4.4,cryptography==46.0.3,dict2xml==1.7.7,idna==3.11,iniconfig==2.3.0,invoke==2.2.1,lxml==6.0.2,netconf-client==3.5.0,packaging==25.0,paramiko==4.0.0,pip==25.2,pluggy==1.6.0,psutil==7.1.2,pycparser==2.23,Pygments==2.19.2,PyNaCl==1.6.0,pytest==8.4.2,requests==2.32.5,setuptools==80.9.0,urllib3==2.5.0 tests_hybrid: commands[0] /w/workspace/transportpce-tox-verify-transportpce-master/tests> ./launch_tests.sh hybrid using environment variables from ./karaf221.env pytest -q transportpce_tests/hybrid/test01_device_change_notifications.py ................................................... [100%] 51 passed in 148.66s (0:02:28) pytest -q transportpce_tests/hybrid/test02_B100G_end2end.py ........................................................................ [ 66%] ..............FFFFFFFFFFFF........... [100%] =================================== FAILURES =================================== ___________ TestTransportPCEB100GEndtoend.test_087_get_400GE_service ___________ self = def test_087_get_400GE_service(self): response = test_utils.get_ordm_serv_list_attr_request("services", "service-400GE") > self.assertEqual(response['status_code'], requests.codes.ok) E AssertionError: 409 != 200 transportpce_tests/hybrid/test02_B100G_end2end.py:1352: AssertionError ___________ TestTransportPCEB100GEndtoend.test_088_check_xc1_roadma ____________ self = def test_088_check_xc1_roadma(self): response = test_utils.check_node_attribute_request( "ROADM-A1", "roadm-connections", "SRG1-PP1-TXRX-DEG2-TTP-TXRX-755:768") > self.assertEqual(response['status_code'], requests.codes.ok) E AssertionError: 409 != 200 transportpce_tests/hybrid/test02_B100G_end2end.py:1362: AssertionError ___________ TestTransportPCEB100GEndtoend.test_089_check_topo_xpdra2 ___________ self = def test_089_check_topo_xpdra2(self): response = test_utils.get_ietf_network_node_request('openroadm-topology', 'XPDR-A2-XPDR1', 'config') self.assertEqual(response['status_code'], requests.codes.ok) liste_tp = response['node']['ietf-network-topology:termination-point'] for ele in liste_tp: if ele['tp-id'] == 'XPDR1-NETWORK1': self.assertEqual( 196.08125, > float(ele['org-openroadm-network-topology:xpdr-network-attributes']['wavelength']['frequency'])) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ E KeyError: 'wavelength' transportpce_tests/hybrid/test02_B100G_end2end.py:1381: KeyError ________ TestTransportPCEB100GEndtoend.test_090_check_topo_roadma_SRG1 _________ self = def test_090_check_topo_roadma_SRG1(self): response = test_utils.get_ietf_network_node_request('openroadm-topology', 'ROADM-A1-SRG1', 'config') self.assertEqual(response['status_code'], requests.codes.ok) freq_map = base64.b64decode( response['node']['org-openroadm-network-topology:srg-attributes']['avail-freq-maps'][0]['freq-map']) freq_map_array = [int(x) for x in freq_map] > self.assertEqual(freq_map_array[95], 0, "Index 1 should not be available") E AssertionError: 255 != 0 : Index 1 should not be available transportpce_tests/hybrid/test02_B100G_end2end.py:1395: AssertionError ________ TestTransportPCEB100GEndtoend.test_091_check_topo_roadma_DEG1 _________ self = def test_091_check_topo_roadma_DEG1(self): response = test_utils.get_ietf_network_node_request('openroadm-topology', 'ROADM-A1-DEG2', 'config') self.assertEqual(response['status_code'], requests.codes.ok) freq_map = base64.b64decode( response['node']['org-openroadm-network-topology:degree-attributes']['avail-freq-maps'][0]['freq-map']) freq_map_array = [int(x) for x in freq_map] > self.assertEqual(freq_map_array[95], 0, "Index 1 should not be available") E AssertionError: 255 != 0 : Index 1 should not be available transportpce_tests/hybrid/test02_B100G_end2end.py:1413: AssertionError __ TestTransportPCEB100GEndtoend.test_092_check_interface_400GE_CLIENT_xpdra2 __ self = def test_092_check_interface_400GE_CLIENT_xpdra2(self): response = test_utils.check_node_attribute_request( 'XPDR-A2', 'interface', 'XPDR1-CLIENT1-ETHERNET') > self.assertEqual(response['status_code'], requests.codes.ok) E AssertionError: 409 != 200 transportpce_tests/hybrid/test02_B100G_end2end.py:1431: AssertionError ______ TestTransportPCEB100GEndtoend.test_093_check_interface_OTSI_xpdra2 ______ self = def test_093_check_interface_OTSI_xpdra2(self): response = test_utils.check_node_attribute_request( 'XPDR-A2', 'interface', 'XPDR1-NETWORK1-755:768') > self.assertEqual(response['status_code'], requests.codes.ok) E AssertionError: 409 != 200 transportpce_tests/hybrid/test02_B100G_end2end.py:1448: AssertionError ___ TestTransportPCEB100GEndtoend.test_094_check_interface_OTSI_GROUP_xpdra2 ___ self = def test_094_check_interface_OTSI_GROUP_xpdra2(self): response = test_utils.check_node_attribute_request( 'XPDR-A2', 'interface', 'XPDR1-NETWORK1-OTSIGROUP-400G') > self.assertEqual(response['status_code'], requests.codes.ok) E AssertionError: 409 != 200 transportpce_tests/hybrid/test02_B100G_end2end.py:1474: AssertionError _____ TestTransportPCEB100GEndtoend.test_095_check_interface_OTUC4_xpdra2 ______ self = def test_095_check_interface_OTUC4_xpdra2(self): response = test_utils.check_node_attribute_request( 'XPDR-A2', 'interface', 'XPDR1-NETWORK1-OTUC4') > self.assertEqual(response['status_code'], requests.codes.ok) E AssertionError: 409 != 200 transportpce_tests/hybrid/test02_B100G_end2end.py:1493: AssertionError _____ TestTransportPCEB100GEndtoend.test_096_check_interface_ODUC4_xpdra2 ______ self = def test_096_check_interface_ODUC4_xpdra2(self): response = test_utils.check_node_attribute_request( 'XPDR-A2', 'interface', 'XPDR1-NETWORK1-ODUC4') > self.assertEqual(response['status_code'], requests.codes.ok) E AssertionError: 409 != 200 transportpce_tests/hybrid/test02_B100G_end2end.py:1519: AssertionError ____ TestTransportPCEB100GEndtoend.test_097_check_interface_ODUFLEX_xpdra2 _____ self = def test_097_check_interface_ODUFLEX_xpdra2(self): response = test_utils.check_node_attribute_request( 'XPDR-A2', 'interface', 'XPDR1-NETWORK1-ODUFLEX') > self.assertEqual(response['status_code'], requests.codes.ok) E AssertionError: 409 != 200 transportpce_tests/hybrid/test02_B100G_end2end.py:1550: AssertionError _________ TestTransportPCEB100GEndtoend.test_098_delete_400GE_service __________ self = def test_098_delete_400GE_service(self): self.del_serv_input_data["service-delete-req-info"]["service-name"] = "service-400GE" response = test_utils.transportpce_api_rpc_request( 'org-openroadm-service', 'service-delete', self.del_serv_input_data) self.assertEqual(response['status_code'], requests.codes.ok) > self.assertIn('Renderer service delete in progress', response['output']['configuration-response-common']['response-message']) E AssertionError: 'Renderer service delete in progress' not found in "Service 'service-400GE' does not exist in datastore" transportpce_tests/hybrid/test02_B100G_end2end.py:1606: AssertionError =========================== short test summary info ============================ FAILED transportpce_tests/hybrid/test02_B100G_end2end.py::TestTransportPCEB100GEndtoend::test_087_get_400GE_service FAILED transportpce_tests/hybrid/test02_B100G_end2end.py::TestTransportPCEB100GEndtoend::test_088_check_xc1_roadma FAILED transportpce_tests/hybrid/test02_B100G_end2end.py::TestTransportPCEB100GEndtoend::test_089_check_topo_xpdra2 FAILED transportpce_tests/hybrid/test02_B100G_end2end.py::TestTransportPCEB100GEndtoend::test_090_check_topo_roadma_SRG1 FAILED transportpce_tests/hybrid/test02_B100G_end2end.py::TestTransportPCEB100GEndtoend::test_091_check_topo_roadma_DEG1 FAILED transportpce_tests/hybrid/test02_B100G_end2end.py::TestTransportPCEB100GEndtoend::test_092_check_interface_400GE_CLIENT_xpdra2 FAILED transportpce_tests/hybrid/test02_B100G_end2end.py::TestTransportPCEB100GEndtoend::test_093_check_interface_OTSI_xpdra2 FAILED transportpce_tests/hybrid/test02_B100G_end2end.py::TestTransportPCEB100GEndtoend::test_094_check_interface_OTSI_GROUP_xpdra2 FAILED transportpce_tests/hybrid/test02_B100G_end2end.py::TestTransportPCEB100GEndtoend::test_095_check_interface_OTUC4_xpdra2 FAILED transportpce_tests/hybrid/test02_B100G_end2end.py::TestTransportPCEB100GEndtoend::test_096_check_interface_ODUC4_xpdra2 FAILED transportpce_tests/hybrid/test02_B100G_end2end.py::TestTransportPCEB100GEndtoend::test_097_check_interface_ODUFLEX_xpdra2 FAILED transportpce_tests/hybrid/test02_B100G_end2end.py::TestTransportPCEB100GEndtoend::test_098_delete_400GE_service 12 failed, 97 passed in 406.77s (0:06:46) tests_hybrid: exit 1 (556.10 seconds) /w/workspace/transportpce-tox-verify-transportpce-master/tests> ./launch_tests.sh hybrid pid=40548 buildcontroller: FAIL code 1 (76.16=setup[9.85]+cmd[66.31] seconds) sims: OK (12.68=setup[9.63]+cmd[3.05] seconds) build_karaf_tests121: OK (74.65=setup[8.46]+cmd[66.18] seconds) testsPCE: FAIL code 1 (2466.42=setup[64.55]+cmd[2401.87] seconds) tests121: OK (1391.82=setup[8.33]+cmd[1383.49] seconds) build_karaf_tests221: OK (68.77=setup[8.40]+cmd[60.36] seconds) tests_tapi: OK (1339.38=setup[8.24]+cmd[1331.14] seconds) tests221: OK (3449.98=setup[7.95]+cmd[3442.03] seconds) build_karaf_tests71: OK (70.77=setup[8.47]+cmd[62.30] seconds) tests71: OK (458.81=setup[8.97]+cmd[449.84] seconds) build_karaf_tests190: OK (73.12=setup[8.28]+cmd[64.83] seconds) tests190: OK (412.42=setup[8.05]+cmd[404.37] seconds) tests_hybrid: FAIL code 1 (563.11=setup[7.01]+cmd[556.10] seconds) buildlighty: OK (36.99=setup[11.62]+cmd[25.36] seconds) docs: OK (31.43=setup[28.86]+cmd[2.57] seconds) docs-linkcheck: OK (32.14=setup[28.56]+cmd[3.58] seconds) checkbashisms: OK (3.14=setup[1.80]+cmd[0.01,0.05,1.28] seconds) pre-commit: OK (55.21=setup[3.92]+cmd[0.00,0.02,38.56,12.71] seconds) pylint: OK (29.68=setup[3.84]+cmd[25.83] seconds) evaluation failed :( (7969.76 seconds)