02:49:54,53 PM [test-pekko.actor.default-dispatcher-5] [INFO] Slf4jLogger - Slf4jLogger started 02:49:54,509 PM [test-pekko.actor.default-dispatcher-5] [INFO] ArteryTransport - Remoting started with transport [Artery tcp]; listening on address [pekko://test@127.0.0.1:2550] with UID [-8076012064927685656] 02:49:54,529 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Starting up, Pekko version [1.0.3] ... 02:49:54,667 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Registered cluster JMX MBean [pekko:type=Cluster] 02:49:54,668 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Started up successfully 02:49:54,817 PM [test-pekko.actor.default-dispatcher-10] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - No downing-provider-class configured, manual cluster downing required, see https://pekko.apache.org/docs/pekko/current/typed/cluster.html#downing 02:49:54,817 PM [test-pekko.actor.default-dispatcher-10] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - No seed-nodes configured, manual cluster join required, see https://pekko.apache.org/docs/pekko/current/typed/cluster.html#joining 02:49:54,834 PM [test-pekko.actor.default-dispatcher-5] [INFO] Slf4jLogger - Slf4jLogger started 02:49:54,878 PM [test-pekko.actor.default-dispatcher-5] [INFO] ArteryTransport - Remoting started with transport [Artery tcp]; listening on address [pekko://test@127.0.0.1:2552] with UID [-3121478874227604403] 02:49:54,884 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Starting up, Pekko version [1.0.3] ... 02:49:54,891 PM [test-pekko.actor.default-dispatcher-5] [WARN] Cluster - Could not register Cluster JMX MBean with name=pekko:type=Cluster as it is already registered. If you are running multiple clusters in the same JVM, set 'pekko.cluster.jmx.multi-mbeans-in-same-jvm = on' in config 02:49:54,892 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Started up successfully 02:49:54,897 PM [test-pekko.actor.default-dispatcher-11] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - No downing-provider-class configured, manual cluster downing required, see https://pekko.apache.org/docs/pekko/current/typed/cluster.html#downing 02:49:54,898 PM [test-pekko.actor.default-dispatcher-11] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - No seed-nodes configured, manual cluster join required, see https://pekko.apache.org/docs/pekko/current/typed/cluster.html#joining 02:49:55,61 PM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - Actor created TestActor[pekko://test/user/pekko:test@127.0.0.1:2552_device] 02:49:55,77 PM [test-pekko.actor.default-dispatcher-10] [INFO] EmptyLocalActorRef - pekkoDeadLetter Message [org.opendaylight.controller.cluster.common.actor.Monitor] from TestActor[pekko://test/user/pekko:test@127.0.0.1:2552_device] to Actor[pekko://test/user/termination-monitor] was not delivered. [1] dead letters encountered. If this is not an expected behavior then Actor[pekko://test/user/termination-monitor] may have terminated unexpectedly. This logging can be turned off or adjusted with configuration settings 'pekko.log-dead-letters' and 'pekko.log-dead-letters-during-shutdown'. 02:49:55,200 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Operational state for node Uri{value=device} created: Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=Connected, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]} 02:49:55,203 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave actor created with name Actor[pekko://test/user/$a#-1262579797] 02:49:55,204 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeActor - Actor created Actor[pekko://test/user/$a#-1262579797] 02:49:55,206 PM [test-pekko.actor.default-dispatcher-10] [INFO] EmptyLocalActorRef - pekkoDeadLetter Message [org.opendaylight.controller.cluster.common.actor.Monitor] from Actor[pekko://test/user/$a#-1262579797] to Actor[pekko://test/user/termination-monitor] was not delivered. [1] dead letters encountered. If this is not an expected behavior then Actor[pekko://test/user/termination-monitor] may have terminated unexpectedly. This logging can be turned off or adjusted with configuration settings 'pekko.log-dead-letters' and 'pekko.log-dead-letters-during-shutdown'. 02:49:55,206 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-1262579797]] message to master ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] 02:49:55,727 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message AskForMasterMountPoint [slaveActorRef=Actor[pekko://test@127.0.0.1:2550/user/$a#-1262579797]] 02:49:55,729 PM [test-pekko.actor.default-dispatcher-10] [WARN] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Received AskForMasterMountPoint [slaveActorRef=Actor[pekko://test@127.0.0.1:2550/user/$a#-1262579797]] but we don't appear to be the master 02:49:55,761 PM [test-pekko.actor.default-dispatcher-10] [ERROR] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Failed to send message AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-1262579797]] to ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)]. Slave mount point could not be created org.opendaylight.netconf.topology.singleton.messages.NotMasterException: Actor TestActor[pekko://test/user/pekko:test@127.0.0.1:2552_device] is not the current master at org.opendaylight.netconf.topology.singleton.impl.actors.NetconfNodeActor.handleReceive(NetconfNodeActor.java:141) at org.opendaylight.netconf.topology.singleton.impl.NetconfNodeManagerTest$TestMasterActor.handleReceive(NetconfNodeManagerTest.java:413) at org.apache.pekko.japi.pf.UnitCaseStatement.apply(CaseStatements.scala:33) at org.apache.pekko.japi.pf.UnitCaseStatement.apply(CaseStatements.scala:29) at scala.PartialFunction.applyOrElse(PartialFunction.scala:214) at scala.PartialFunction.applyOrElse$(PartialFunction.scala:213) at org.apache.pekko.japi.pf.UnitCaseStatement.applyOrElse(CaseStatements.scala:29) at scala.PartialFunction$OrElse.applyOrElse(PartialFunction.scala:269) at scala.PartialFunction$OrElse.applyOrElse(PartialFunction.scala:270) at org.apache.pekko.actor.Actor.aroundReceive(Actor.scala:547) at org.apache.pekko.actor.Actor.aroundReceive$(Actor.scala:545) at org.apache.pekko.actor.AbstractActor.aroundReceive(AbstractActor.scala:229) at org.apache.pekko.actor.ActorCell.receiveMessage(ActorCell.scala:590) at org.apache.pekko.actor.ActorCell.invoke(ActorCell.scala:557) at org.apache.pekko.dispatch.Mailbox.processMailbox(Mailbox.scala:280) at org.apache.pekko.dispatch.Mailbox.run(Mailbox.scala:241) at org.apache.pekko.dispatch.Mailbox.exec(Mailbox.scala:253) at java.base/java.util.concurrent.ForkJoinTask.doExec(ForkJoinTask.java:387) at java.base/java.util.concurrent.ForkJoinPool$WorkQueue.topLevelExec(ForkJoinPool.java:1312) at java.base/java.util.concurrent.ForkJoinPool.scan(ForkJoinPool.java:1843) at java.base/java.util.concurrent.ForkJoinPool.runWorker(ForkJoinPool.java:1808) at java.base/java.util.concurrent.ForkJoinWorkerThread.run(ForkJoinWorkerThread.java:188) 02:49:56,287 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message org.opendaylight.netconf.topology.singleton.messages.CreateInitialMasterActorData@2a848885 02:49:56,291 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Master is ready. 02:49:56,296 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Operational state for node Uri{value=device} created: Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=Connected, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]} 02:49:56,298 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message org.opendaylight.netconf.topology.singleton.messages.RefreshSlaveActor@17b1897f 02:49:56,300 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-1262579797]] message to master ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] 02:49:56,308 PM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message AskForMasterMountPoint [slaveActorRef=Actor[pekko://test@127.0.0.1:2550/user/$a#-1262579797]] 02:49:56,308 PM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending RegisterMountPoint reply to Actor[pekko://test@127.0.0.1:2550/user/$a#-1262579797] 02:49:56,328 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message RegisterMountPoint [allSourceIdentifiers=[SourceIdentifier [testID]], masterActorRef=Actor[pekko://test@127.0.0.1:2552/user/pekko:test@127.0.0.1:2552_device]] 02:49:56,354 PM [test-pekko.actor.default-dispatcher-10] [INFO] SharedEffectiveModelContextFactory - Using weak references 02:49:56,378 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-1262579797]] message to ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] succeeded 02:49:57,387 PM [test-pekko.actor.default-dispatcher-10] [WARN] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Failed to resolve schema context - retrying... org.opendaylight.yangtools.yang.model.repo.api.MissingSchemaSourceException: All available providers exhausted at org.opendaylight.yangtools.yang.model.repo.spi.AbstractSchemaRepository.lambda$fetchSource$0(AbstractSchemaRepository.java:72) at com.google.common.util.concurrent.AbstractCatchingFuture$AsyncCatchingFuture.doFallback(AbstractCatchingFuture.java:207) at com.google.common.util.concurrent.AbstractCatchingFuture$AsyncCatchingFuture.doFallback(AbstractCatchingFuture.java:194) at com.google.common.util.concurrent.AbstractCatchingFuture.run(AbstractCatchingFuture.java:136) at com.google.common.util.concurrent.DirectExecutor.execute(DirectExecutor.java:30) at com.google.common.util.concurrent.AbstractFuture.executeListener(AbstractFuture.java:1004) at com.google.common.util.concurrent.AbstractFuture.complete(AbstractFuture.java:767) at com.google.common.util.concurrent.AbstractFuture.setException(AbstractFuture.java:516) at com.google.common.util.concurrent.AbstractTransformFuture.run(AbstractTransformFuture.java:108) at com.google.common.util.concurrent.DirectExecutor.execute(DirectExecutor.java:30) at com.google.common.util.concurrent.AbstractFuture.executeListener(AbstractFuture.java:1004) at com.google.common.util.concurrent.AbstractFuture.complete(AbstractFuture.java:767) at com.google.common.util.concurrent.AbstractFuture.setException(AbstractFuture.java:516) at com.google.common.util.concurrent.AbstractCatchingFuture.run(AbstractCatchingFuture.java:139) at com.google.common.util.concurrent.DirectExecutor.execute(DirectExecutor.java:30) at com.google.common.util.concurrent.AbstractFuture.executeListener(AbstractFuture.java:1004) at com.google.common.util.concurrent.AbstractFuture.complete(AbstractFuture.java:767) at com.google.common.util.concurrent.AbstractFuture.setException(AbstractFuture.java:516) at com.google.common.util.concurrent.SettableFuture.setException(SettableFuture.java:54) at org.opendaylight.controller.cluster.schema.provider.impl.RemoteSchemaProvider$1.onComplete(RemoteSchemaProvider.java:50) at org.opendaylight.controller.cluster.schema.provider.impl.RemoteSchemaProvider$1.onComplete(RemoteSchemaProvider.java:43) at org.apache.pekko.dispatch.OnComplete.internal(Future.scala:309) at org.apache.pekko.dispatch.OnComplete.internal(Future.scala:307) at org.apache.pekko.dispatch.japi$CallbackBridge.apply(Future.scala:234) at org.apache.pekko.dispatch.japi$CallbackBridge.apply(Future.scala:231) at scala.concurrent.impl.Promise$Transformation.run(Promise.scala:484) at org.apache.pekko.dispatch.BatchingExecutor$AbstractBatch.processBatch(BatchingExecutor.scala:73) at org.apache.pekko.dispatch.BatchingExecutor$BlockableBatch.$anonfun$run$1(BatchingExecutor.scala:110) at scala.runtime.java8.JFunction0$mcV$sp.apply(JFunction0$mcV$sp.scala:18) at scala.concurrent.BlockContext$.withBlockContext(BlockContext.scala:94) at org.apache.pekko.dispatch.BatchingExecutor$BlockableBatch.run(BatchingExecutor.scala:110) at org.apache.pekko.dispatch.TaskInvocation.run(AbstractDispatcher.scala:59) at org.apache.pekko.dispatch.ForkJoinExecutorConfigurator$PekkoForkJoinTask.exec(ForkJoinExecutorConfigurator.scala:57) at java.base/java.util.concurrent.ForkJoinTask.doExec(ForkJoinTask.java:387) at java.base/java.util.concurrent.ForkJoinPool$WorkQueue.topLevelExec(ForkJoinPool.java:1312) at java.base/java.util.concurrent.ForkJoinPool.scan(ForkJoinPool.java:1843) at java.base/java.util.concurrent.ForkJoinPool.runWorker(ForkJoinPool.java:1808) at java.base/java.util.concurrent.ForkJoinWorkerThread.run(ForkJoinWorkerThread.java:188) Caused by: org.opendaylight.yangtools.yang.model.repo.api.MissingSchemaSourceException: All available providers exhausted at org.opendaylight.yangtools.yang.model.repo.spi.AbstractSchemaRepository.lambda$fetchSource$0(AbstractSchemaRepository.java:72) at com.google.common.util.concurrent.AbstractCatchingFuture$AsyncCatchingFuture.doFallback(AbstractCatchingFuture.java:207) at com.google.common.util.concurrent.AbstractCatchingFuture$AsyncCatchingFuture.doFallback(AbstractCatchingFuture.java:194) at com.google.common.util.concurrent.AbstractCatchingFuture.run(AbstractCatchingFuture.java:136) ... 24 more Caused by: org.apache.pekko.pattern.AskTimeoutException: Ask timed out on [Actor[pekko://test@127.0.0.1:2552/user/pekko:test@127.0.0.1:2552_device]] after [1000 ms]. Message of type [org.opendaylight.netconf.topology.singleton.messages.YangTextSchemaSourceRequest]. A typical reason for `AskTimeoutException` is that the recipient actor didn't send a reply. 02:49:57,395 PM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message YangTextSchemaSourceRequest [sourceIdentifier=SourceIdentifier [testID]] 02:49:57,408 PM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: getSchemaSource for SourceIdentifier [testID] succeeded 02:49:57,645 PM [test-pekko.actor.default-dispatcher-5] [INFO] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Schema context resolved: [ModuleEffectiveStatementImpl{argument=Unqualified{localName=testID}}] - registering slave mount point 02:49:57,698 PM [test-pekko.actor.default-dispatcher-5] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point registered. 02:49:57,712 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Operational state for node Uri{value=device} created: Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=Connected, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]} 02:49:57,712 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message org.opendaylight.netconf.topology.singleton.messages.RefreshSlaveActor@242fb62f 02:49:57,713 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-1262579797]] message to master ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] 02:49:58,728 PM [test-pekko.actor.default-dispatcher-5] [WARN] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Failed to send message to ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] - retrying... org.apache.pekko.pattern.AskTimeoutException: Ask timed out on [ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)]] after [1000 ms]. Message of type [org.opendaylight.netconf.topology.singleton.messages.AskForMasterMountPoint]. A typical reason for `AskTimeoutException` is that the recipient actor didn't send a reply. 02:49:58,735 PM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message AskForMasterMountPoint [slaveActorRef=Actor[pekko://test@127.0.0.1:2550/user/$a#-1262579797]] 02:49:58,736 PM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending RegisterMountPoint reply to Actor[pekko://test@127.0.0.1:2550/user/$a#-1262579797] 02:49:58,741 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message RegisterMountPoint [allSourceIdentifiers=[SourceIdentifier [testID]], masterActorRef=Actor[pekko://test@127.0.0.1:2552/user/pekko:test@127.0.0.1:2552_device]] 02:49:58,742 PM [test-pekko.actor.default-dispatcher-5] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point unregistered. 02:49:58,743 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-1262579797]] message to ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] succeeded 02:49:58,743 PM [test-pekko.actor.default-dispatcher-5] [INFO] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Schema context resolved: [ModuleEffectiveStatementImpl{argument=Unqualified{localName=testID}}] - registering slave mount point 02:49:58,744 PM [test-pekko.actor.default-dispatcher-5] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point registered. 02:49:58,753 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending poison pill to Actor[pekko://test/user/$a#-1262579797] 02:49:58,753 PM [test-pekko.actor.default-dispatcher-5] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point unregistered. 02:49:58,765 PM [test-pekko.actor.default-dispatcher-5] [INFO] CoordinatedShutdown - Running CoordinatedShutdown with reason [ActorSystemTerminateReason] 02:49:58,777 PM [test-pekko.actor.default-dispatcher-5] [INFO] LocalActorRef - pekkoDeadLetter Message [org.apache.pekko.cluster.ClusterUserAction$Leave] to Actor[pekko://test/system/cluster/core/daemon#1510892036] was unhandled. [2] dead letters encountered. This logging can be turned off or adjusted with configuration settings 'pekko.log-dead-letters' and 'pekko.log-dead-letters-during-shutdown'. 02:49:58,779 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Exiting completed 02:49:58,779 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Shutting down... 02:49:58,779 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Successfully shut down 02:49:58,787 PM [test-pekko.actor.default-dispatcher-10] [INFO] RemoteActorRefProvider$RemotingTerminator - Shutting down remote daemon. 02:49:58,788 PM [test-pekko.actor.default-dispatcher-5] [INFO] RemoteActorRefProvider$RemotingTerminator - Remote daemon shut down; proceeding with flushing remote transports. 02:49:58,816 PM [test-pekko.actor.default-dispatcher-5] [WARN] Materializer - [outbound connection to [pekko://test@127.0.0.1:2552], control stream] Upstream failed, cause: StreamTcpException: The connection has been aborted 02:49:58,816 PM [test-pekko.actor.default-dispatcher-5] [WARN] Materializer - [outbound connection to [pekko://test@127.0.0.1:2552], message stream] Upstream failed, cause: StreamTcpException: The connection has been aborted 02:49:58,824 PM [test-pekko.actor.default-dispatcher-5] [INFO] RemoteActorRefProvider$RemotingTerminator - Remoting shut down. 02:49:58,841 PM [test-pekko.actor.default-dispatcher-11] [INFO] CoordinatedShutdown - Running CoordinatedShutdown with reason [ActorSystemTerminateReason] 02:49:58,842 PM [test-pekko.actor.default-dispatcher-11] [INFO] LocalActorRef - pekkoDeadLetter Message [org.apache.pekko.cluster.ClusterUserAction$Leave] to Actor[pekko://test/system/cluster/core/daemon#1092880102] was unhandled. [2] dead letters encountered. This logging can be turned off or adjusted with configuration settings 'pekko.log-dead-letters' and 'pekko.log-dead-letters-during-shutdown'. 02:49:58,844 PM [test-pekko.actor.default-dispatcher-10] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Exiting completed 02:49:58,844 PM [test-pekko.actor.default-dispatcher-10] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Shutting down... 02:49:58,844 PM [test-pekko.actor.default-dispatcher-10] [WARN] Cluster - Could not unregister Cluster JMX MBean with name=pekko:type=Cluster as it was not found. If you are running multiple clusters in the same JVM, set 'pekko.cluster.jmx.multi-mbeans-in-same-jvm = on' in config 02:49:58,844 PM [test-pekko.actor.default-dispatcher-10] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Successfully shut down 02:49:58,846 PM [test-pekko.actor.default-dispatcher-11] [INFO] RemoteActorRefProvider$RemotingTerminator - Shutting down remote daemon. 02:49:58,846 PM [test-pekko.actor.default-dispatcher-11] [INFO] RemoteActorRefProvider$RemotingTerminator - Remote daemon shut down; proceeding with flushing remote transports. 02:49:59,870 PM [test-pekko.actor.default-dispatcher-11] [INFO] RemoteActorRefProvider$RemotingTerminator - Remoting shut down. 02:49:59,908 PM [test-pekko.actor.default-dispatcher-5] [INFO] Slf4jLogger - Slf4jLogger started 02:49:59,934 PM [test-pekko.actor.default-dispatcher-5] [INFO] ArteryTransport - Remoting started with transport [Artery tcp]; listening on address [pekko://test@127.0.0.1:2550] with UID [5495864644147283598] 02:49:59,935 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Starting up, Pekko version [1.0.3] ... 02:49:59,939 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Registered cluster JMX MBean [pekko:type=Cluster] 02:49:59,939 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Started up successfully 02:49:59,941 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - No downing-provider-class configured, manual cluster downing required, see https://pekko.apache.org/docs/pekko/current/typed/cluster.html#downing 02:49:59,941 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - No seed-nodes configured, manual cluster join required, see https://pekko.apache.org/docs/pekko/current/typed/cluster.html#joining 02:49:59,989 PM [test-pekko.actor.default-dispatcher-5] [INFO] Slf4jLogger - Slf4jLogger started 02:50:00,11 PM [test-pekko.actor.default-dispatcher-5] [INFO] ArteryTransport - Remoting started with transport [Artery tcp]; listening on address [pekko://test@127.0.0.1:2552] with UID [-6989207810696541204] 02:50:00,12 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Starting up, Pekko version [1.0.3] ... 02:50:00,16 PM [test-pekko.actor.default-dispatcher-5] [WARN] Cluster - Could not register Cluster JMX MBean with name=pekko:type=Cluster as it is already registered. If you are running multiple clusters in the same JVM, set 'pekko.cluster.jmx.multi-mbeans-in-same-jvm = on' in config 02:50:00,16 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Started up successfully 02:50:00,17 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - No downing-provider-class configured, manual cluster downing required, see https://pekko.apache.org/docs/pekko/current/typed/cluster.html#downing 02:50:00,17 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - No seed-nodes configured, manual cluster join required, see https://pekko.apache.org/docs/pekko/current/typed/cluster.html#joining 02:50:00,51 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeManagerTest$TestMasterActor - Actor created TestActor[pekko://test/user/pekko:test@127.0.0.1:2552_device] 02:50:00,51 PM [test-pekko.actor.default-dispatcher-5] [INFO] EmptyLocalActorRef - pekkoDeadLetter Message [org.opendaylight.controller.cluster.common.actor.Monitor] from TestActor[pekko://test/user/pekko:test@127.0.0.1:2552_device] to Actor[pekko://test/user/termination-monitor] was not delivered. [1] dead letters encountered. If this is not an expected behavior then Actor[pekko://test/user/termination-monitor] may have terminated unexpectedly. This logging can be turned off or adjusted with configuration settings 'pekko.log-dead-letters' and 'pekko.log-dead-letters-during-shutdown'. 02:50:00,65 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message org.opendaylight.netconf.topology.singleton.messages.CreateInitialMasterActorData@5a985940 02:50:00,66 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Master is ready. 02:50:00,85 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Registering data tree change listener on path DataObjectIdentifier[ @ urn.tbd.params.xml.ns.yang.network.topology.rev131021.NetworkTopology ... network.topology.Topology[TopologyKey{topologyId=Uri{value=topology-netconf}}] ... topology.Node[NodeKey{nodeId=Uri{value=device}}] ] 02:50:00,87 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Operational state for node Uri{value=device} created: Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=Connected, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]} 02:50:00,88 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave actor created with name Actor[pekko://test/user/$a#-289472845] 02:50:00,88 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeActor - Actor created Actor[pekko://test/user/$a#-289472845] 02:50:00,88 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-289472845]] message to master ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] 02:50:00,89 PM [test-pekko.actor.default-dispatcher-10] [INFO] EmptyLocalActorRef - pekkoDeadLetter Message [org.opendaylight.controller.cluster.common.actor.Monitor] from Actor[pekko://test/user/$a#-289472845] to Actor[pekko://test/user/termination-monitor] was not delivered. [1] dead letters encountered. If this is not an expected behavior then Actor[pekko://test/user/termination-monitor] may have terminated unexpectedly. This logging can be turned off or adjusted with configuration settings 'pekko.log-dead-letters' and 'pekko.log-dead-letters-during-shutdown'. 02:50:00,138 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message AskForMasterMountPoint [slaveActorRef=Actor[pekko://test@127.0.0.1:2550/user/$a#-289472845]] 02:50:00,138 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending RegisterMountPoint reply to Actor[pekko://test@127.0.0.1:2550/user/$a#-289472845] 02:50:00,141 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message RegisterMountPoint [allSourceIdentifiers=[SourceIdentifier [testID]], masterActorRef=Actor[pekko://test@127.0.0.1:2552/user/pekko:test@127.0.0.1:2552_device]] 02:50:00,142 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-289472845]] message to ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] succeeded 02:50:00,144 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message YangTextSchemaSourceRequest [sourceIdentifier=SourceIdentifier [testID]] 02:50:00,145 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: getSchemaSource for SourceIdentifier [testID] succeeded 02:50:00,161 PM [test-pekko.actor.default-dispatcher-10] [INFO] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Schema context resolved: [ModuleEffectiveStatementImpl{argument=Unqualified{localName=testID}}] - registering slave mount point 02:50:00,167 PM [test-pekko.actor.default-dispatcher-10] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point registered. 02:50:00,177 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Operational state for node Uri{value=device} deleted. 02:50:00,178 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending message to unregister slave mountpoint to Actor[pekko://test/user/$a#-289472845] 02:50:00,179 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message org.opendaylight.netconf.topology.singleton.messages.UnregisterSlaveMountPoint@4d577bb3 02:50:00,179 PM [test-pekko.actor.default-dispatcher-10] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point unregistered. 02:50:00,190 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Operational state for node Uri{value=device} created: Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=Connected, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]} 02:50:00,191 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-289472845]] message to master ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] 02:50:00,192 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message org.opendaylight.netconf.topology.singleton.messages.RefreshSlaveActor@68c0539e 02:50:00,197 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message AskForMasterMountPoint [slaveActorRef=Actor[pekko://test@127.0.0.1:2550/user/$a#-289472845]] 02:50:00,197 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending RegisterMountPoint reply to Actor[pekko://test@127.0.0.1:2550/user/$a#-289472845] 02:50:00,201 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message RegisterMountPoint [allSourceIdentifiers=[SourceIdentifier [testID]], masterActorRef=Actor[pekko://test@127.0.0.1:2552/user/pekko:test@127.0.0.1:2552_device]] 02:50:00,201 PM [test-pekko.actor.default-dispatcher-10] [INFO] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Schema context resolved: [ModuleEffectiveStatementImpl{argument=Unqualified{localName=testID}}] - registering slave mount point 02:50:00,201 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-289472845]] message to ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] succeeded 02:50:00,202 PM [test-pekko.actor.default-dispatcher-10] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point registered. 02:50:00,203 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Operational state for node Uri{value=device} updated from Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=Connected, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]} to Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=Connected, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]} 02:50:00,204 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-289472845]] message to master ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] 02:50:00,204 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message org.opendaylight.netconf.topology.singleton.messages.RefreshSlaveActor@631b42c5 02:50:00,207 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message AskForMasterMountPoint [slaveActorRef=Actor[pekko://test@127.0.0.1:2550/user/$a#-289472845]] 02:50:00,207 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending RegisterMountPoint reply to Actor[pekko://test@127.0.0.1:2550/user/$a#-289472845] 02:50:00,210 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message RegisterMountPoint [allSourceIdentifiers=[SourceIdentifier [testID]], masterActorRef=Actor[pekko://test@127.0.0.1:2552/user/pekko:test@127.0.0.1:2552_device]] 02:50:00,210 PM [test-pekko.actor.default-dispatcher-10] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point unregistered. 02:50:00,211 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-289472845]] message to ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] succeeded 02:50:00,211 PM [test-pekko.actor.default-dispatcher-10] [INFO] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Schema context resolved: [ModuleEffectiveStatementImpl{argument=Unqualified{localName=testID}}] - registering slave mount point 02:50:00,212 PM [test-pekko.actor.default-dispatcher-10] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point registered. 02:50:00,218 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Operational state for node Uri{value=device} - subtree modified from Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=Connected, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]} to Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=UnableToConnect, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]} 02:50:00,218 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending message to unregister slave mountpoint to Actor[pekko://test/user/$a#-289472845] 02:50:00,219 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message org.opendaylight.netconf.topology.singleton.messages.UnregisterSlaveMountPoint@3f9d773 02:50:00,219 PM [test-pekko.actor.default-dispatcher-10] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point unregistered. 02:50:00,229 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending poison pill to Actor[pekko://test/user/$a#-289472845] 02:50:00,231 PM [test-pekko.actor.default-dispatcher-10] [INFO] CoordinatedShutdown - Running CoordinatedShutdown with reason [ActorSystemTerminateReason] 02:50:00,234 PM [test-pekko.actor.default-dispatcher-10] [INFO] LocalActorRef - pekkoDeadLetter Message [org.apache.pekko.cluster.ClusterUserAction$Leave] to Actor[pekko://test/system/cluster/core/daemon#-950666104] was unhandled. [2] dead letters encountered. This logging can be turned off or adjusted with configuration settings 'pekko.log-dead-letters' and 'pekko.log-dead-letters-during-shutdown'. 02:50:00,235 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Exiting completed 02:50:00,235 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Shutting down... 02:50:00,235 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Successfully shut down 02:50:00,238 PM [test-pekko.actor.default-dispatcher-5] [INFO] RemoteActorRefProvider$RemotingTerminator - Shutting down remote daemon. 02:50:00,238 PM [test-pekko.actor.default-dispatcher-5] [INFO] RemoteActorRefProvider$RemotingTerminator - Remote daemon shut down; proceeding with flushing remote transports. 02:50:00,246 PM [test-pekko.actor.default-dispatcher-5] [WARN] Materializer - [outbound connection to [pekko://test@127.0.0.1:2552], control stream] Upstream failed, cause: StreamTcpException: The connection has been aborted 02:50:00,247 PM [test-pekko.actor.default-dispatcher-5] [WARN] Materializer - [outbound connection to [pekko://test@127.0.0.1:2552], message stream] Upstream failed, cause: StreamTcpException: The connection has been aborted 02:50:00,249 PM [test-pekko.actor.default-dispatcher-5] [INFO] RemoteActorRefProvider$RemotingTerminator - Remoting shut down. 02:50:00,265 PM [test-pekko.actor.default-dispatcher-5] [INFO] CoordinatedShutdown - Running CoordinatedShutdown with reason [ActorSystemTerminateReason] 02:50:00,268 PM [test-pekko.actor.default-dispatcher-5] [INFO] LocalActorRef - pekkoDeadLetter Message [org.apache.pekko.cluster.ClusterUserAction$Leave] to Actor[pekko://test/system/cluster/core/daemon#-535371696] was unhandled. [2] dead letters encountered. This logging can be turned off or adjusted with configuration settings 'pekko.log-dead-letters' and 'pekko.log-dead-letters-during-shutdown'. 02:50:00,269 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Exiting completed 02:50:00,269 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Shutting down... 02:50:00,269 PM [test-pekko.actor.default-dispatcher-5] [WARN] Cluster - Could not unregister Cluster JMX MBean with name=pekko:type=Cluster as it was not found. If you are running multiple clusters in the same JVM, set 'pekko.cluster.jmx.multi-mbeans-in-same-jvm = on' in config 02:50:00,270 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Successfully shut down 02:50:00,274 PM [test-pekko.actor.default-dispatcher-22] [INFO] RemoteActorRefProvider$RemotingTerminator - Shutting down remote daemon. 02:50:00,274 PM [test-pekko.actor.default-dispatcher-22] [INFO] RemoteActorRefProvider$RemotingTerminator - Remote daemon shut down; proceeding with flushing remote transports. 02:50:01,294 PM [test-pekko.actor.default-dispatcher-22] [INFO] RemoteActorRefProvider$RemotingTerminator - Remoting shut down.