07:13:57,427 PM [test-pekko.actor.default-dispatcher-5] [INFO] Slf4jLogger - Slf4jLogger started 07:13:57,867 PM [test-pekko.actor.default-dispatcher-5] [INFO] ArteryTransport - Remoting started with transport [Artery tcp]; listening on address [pekko://test@127.0.0.1:2550] with UID [3726691308458226771] 07:13:57,886 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Starting up, Pekko version [1.0.3] ... 07:13:58,13 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Registered cluster JMX MBean [pekko:type=Cluster] 07:13:58,13 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Started up successfully 07:13:58,58 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - No downing-provider-class configured, manual cluster downing required, see https://pekko.apache.org/docs/pekko/current/typed/cluster.html#downing 07:13:58,58 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - No seed-nodes configured, manual cluster join required, see https://pekko.apache.org/docs/pekko/current/typed/cluster.html#joining 07:13:58,132 PM [test-pekko.actor.default-dispatcher-5] [INFO] Slf4jLogger - Slf4jLogger started 07:13:58,178 PM [test-pekko.actor.default-dispatcher-5] [INFO] ArteryTransport - Remoting started with transport [Artery tcp]; listening on address [pekko://test@127.0.0.1:2552] with UID [-3441025998757934131] 07:13:58,181 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Starting up, Pekko version [1.0.3] ... 07:13:58,188 PM [test-pekko.actor.default-dispatcher-5] [WARN] Cluster - Could not register Cluster JMX MBean with name=pekko:type=Cluster as it is already registered. If you are running multiple clusters in the same JVM, set 'pekko.cluster.jmx.multi-mbeans-in-same-jvm = on' in config 07:13:58,188 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Started up successfully 07:13:58,204 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - No downing-provider-class configured, manual cluster downing required, see https://pekko.apache.org/docs/pekko/current/typed/cluster.html#downing 07:13:58,205 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - No seed-nodes configured, manual cluster join required, see https://pekko.apache.org/docs/pekko/current/typed/cluster.html#joining 07:13:58,313 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeManagerTest$TestMasterActor - Actor created TestActor[pekko://test/user/pekko:test@127.0.0.1:2552_device] 07:13:58,329 PM [test-pekko.actor.default-dispatcher-5] [INFO] EmptyLocalActorRef - pekkoDeadLetter Message [org.opendaylight.controller.cluster.common.actor.Monitor] from TestActor[pekko://test/user/pekko:test@127.0.0.1:2552_device] to Actor[pekko://test/user/termination-monitor] was not delivered. [1] dead letters encountered. If this is not an expected behavior then Actor[pekko://test/user/termination-monitor] may have terminated unexpectedly. This logging can be turned off or adjusted with configuration settings 'pekko.log-dead-letters' and 'pekko.log-dead-letters-during-shutdown'. 07:13:58,444 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Operational state for node Uri{value=device} created: Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=Connected, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]} 07:13:58,447 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave actor created with name Actor[pekko://test/user/$a#-1373194100] 07:13:58,447 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeActor - Actor created Actor[pekko://test/user/$a#-1373194100] 07:13:58,449 PM [test-pekko.actor.default-dispatcher-10] [INFO] EmptyLocalActorRef - pekkoDeadLetter Message [org.opendaylight.controller.cluster.common.actor.Monitor] from Actor[pekko://test/user/$a#-1373194100] to Actor[pekko://test/user/termination-monitor] was not delivered. [1] dead letters encountered. If this is not an expected behavior then Actor[pekko://test/user/termination-monitor] may have terminated unexpectedly. This logging can be turned off or adjusted with configuration settings 'pekko.log-dead-letters' and 'pekko.log-dead-letters-during-shutdown'. 07:13:58,450 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-1373194100]] message to master ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] 07:13:58,880 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message AskForMasterMountPoint [slaveActorRef=Actor[pekko://test@127.0.0.1:2550/user/$a#-1373194100]] 07:13:58,881 PM [test-pekko.actor.default-dispatcher-5] [WARN] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Received AskForMasterMountPoint [slaveActorRef=Actor[pekko://test@127.0.0.1:2550/user/$a#-1373194100]] but we don't appear to be the master 07:13:58,896 PM [test-pekko.actor.default-dispatcher-10] [ERROR] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Failed to send message AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-1373194100]] to ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)]. Slave mount point could not be created org.opendaylight.netconf.topology.singleton.messages.NotMasterException: Actor TestActor[pekko://test/user/pekko:test@127.0.0.1:2552_device] is not the current master at org.opendaylight.netconf.topology.singleton.impl.actors.NetconfNodeActor.handleReceive(NetconfNodeActor.java:141) at org.opendaylight.netconf.topology.singleton.impl.NetconfNodeManagerTest$TestMasterActor.handleReceive(NetconfNodeManagerTest.java:413) at org.apache.pekko.japi.pf.UnitCaseStatement.apply(CaseStatements.scala:33) at org.apache.pekko.japi.pf.UnitCaseStatement.apply(CaseStatements.scala:29) at scala.PartialFunction.applyOrElse(PartialFunction.scala:214) at scala.PartialFunction.applyOrElse$(PartialFunction.scala:213) at org.apache.pekko.japi.pf.UnitCaseStatement.applyOrElse(CaseStatements.scala:29) at scala.PartialFunction$OrElse.applyOrElse(PartialFunction.scala:269) at scala.PartialFunction$OrElse.applyOrElse(PartialFunction.scala:270) at org.apache.pekko.actor.Actor.aroundReceive(Actor.scala:547) at org.apache.pekko.actor.Actor.aroundReceive$(Actor.scala:545) at org.apache.pekko.actor.AbstractActor.aroundReceive(AbstractActor.scala:229) at org.apache.pekko.actor.ActorCell.receiveMessage(ActorCell.scala:590) at org.apache.pekko.actor.ActorCell.invoke(ActorCell.scala:557) at org.apache.pekko.dispatch.Mailbox.processMailbox(Mailbox.scala:280) at org.apache.pekko.dispatch.Mailbox.run(Mailbox.scala:241) at org.apache.pekko.dispatch.Mailbox.exec(Mailbox.scala:253) at java.base/java.util.concurrent.ForkJoinTask.doExec(ForkJoinTask.java:387) at java.base/java.util.concurrent.ForkJoinPool$WorkQueue.topLevelExec(ForkJoinPool.java:1312) at java.base/java.util.concurrent.ForkJoinPool.scan(ForkJoinPool.java:1843) at java.base/java.util.concurrent.ForkJoinPool.runWorker(ForkJoinPool.java:1808) at java.base/java.util.concurrent.ForkJoinWorkerThread.run(ForkJoinWorkerThread.java:188) 07:13:59,540 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message org.opendaylight.netconf.topology.singleton.messages.CreateInitialMasterActorData@548629ad 07:13:59,546 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Master is ready. 07:13:59,549 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Operational state for node Uri{value=device} created: Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=Connected, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]} 07:13:59,550 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message org.opendaylight.netconf.topology.singleton.messages.RefreshSlaveActor@5f8c404 07:13:59,551 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-1373194100]] message to master ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] 07:13:59,560 PM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message AskForMasterMountPoint [slaveActorRef=Actor[pekko://test@127.0.0.1:2550/user/$a#-1373194100]] 07:13:59,560 PM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending RegisterMountPoint reply to Actor[pekko://test@127.0.0.1:2550/user/$a#-1373194100] 07:13:59,578 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message RegisterMountPoint [allSourceIdentifiers=[SourceIdentifier [testID]], masterActorRef=Actor[pekko://test@127.0.0.1:2552/user/pekko:test@127.0.0.1:2552_device]] 07:13:59,604 PM [test-pekko.actor.default-dispatcher-10] [INFO] SharedEffectiveModelContextFactory - Using weak references 07:13:59,630 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-1373194100]] message to ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] succeeded 07:14:00,636 PM [test-pekko.actor.default-dispatcher-5] [WARN] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Failed to resolve schema context - retrying... org.opendaylight.yangtools.yang.model.repo.api.MissingSchemaSourceException: All available providers exhausted at org.opendaylight.yangtools.yang.model.repo.spi.AbstractSchemaRepository.lambda$fetchSource$0(AbstractSchemaRepository.java:72) at com.google.common.util.concurrent.AbstractCatchingFuture$AsyncCatchingFuture.doFallback(AbstractCatchingFuture.java:207) at com.google.common.util.concurrent.AbstractCatchingFuture$AsyncCatchingFuture.doFallback(AbstractCatchingFuture.java:194) at com.google.common.util.concurrent.AbstractCatchingFuture.run(AbstractCatchingFuture.java:136) at com.google.common.util.concurrent.DirectExecutor.execute(DirectExecutor.java:30) at com.google.common.util.concurrent.AbstractFuture.executeListener(AbstractFuture.java:1004) at com.google.common.util.concurrent.AbstractFuture.complete(AbstractFuture.java:767) at com.google.common.util.concurrent.AbstractFuture.setException(AbstractFuture.java:516) at com.google.common.util.concurrent.AbstractTransformFuture.run(AbstractTransformFuture.java:108) at com.google.common.util.concurrent.DirectExecutor.execute(DirectExecutor.java:30) at com.google.common.util.concurrent.AbstractFuture.executeListener(AbstractFuture.java:1004) at com.google.common.util.concurrent.AbstractFuture.complete(AbstractFuture.java:767) at com.google.common.util.concurrent.AbstractFuture.setException(AbstractFuture.java:516) at com.google.common.util.concurrent.AbstractCatchingFuture.run(AbstractCatchingFuture.java:139) at com.google.common.util.concurrent.DirectExecutor.execute(DirectExecutor.java:30) at com.google.common.util.concurrent.AbstractFuture.executeListener(AbstractFuture.java:1004) at com.google.common.util.concurrent.AbstractFuture.complete(AbstractFuture.java:767) at com.google.common.util.concurrent.AbstractFuture.setException(AbstractFuture.java:516) at com.google.common.util.concurrent.SettableFuture.setException(SettableFuture.java:54) at org.opendaylight.controller.cluster.schema.provider.impl.RemoteSchemaProvider$1.onComplete(RemoteSchemaProvider.java:50) at org.opendaylight.controller.cluster.schema.provider.impl.RemoteSchemaProvider$1.onComplete(RemoteSchemaProvider.java:43) at org.apache.pekko.dispatch.OnComplete.internal(Future.scala:309) at org.apache.pekko.dispatch.OnComplete.internal(Future.scala:307) at org.apache.pekko.dispatch.japi$CallbackBridge.apply(Future.scala:234) at org.apache.pekko.dispatch.japi$CallbackBridge.apply(Future.scala:231) at scala.concurrent.impl.Promise$Transformation.run(Promise.scala:484) at org.apache.pekko.dispatch.BatchingExecutor$AbstractBatch.processBatch(BatchingExecutor.scala:73) at org.apache.pekko.dispatch.BatchingExecutor$BlockableBatch.$anonfun$run$1(BatchingExecutor.scala:110) at scala.runtime.java8.JFunction0$mcV$sp.apply(JFunction0$mcV$sp.scala:18) at scala.concurrent.BlockContext$.withBlockContext(BlockContext.scala:94) at org.apache.pekko.dispatch.BatchingExecutor$BlockableBatch.run(BatchingExecutor.scala:110) at org.apache.pekko.dispatch.TaskInvocation.run(AbstractDispatcher.scala:59) at org.apache.pekko.dispatch.ForkJoinExecutorConfigurator$PekkoForkJoinTask.exec(ForkJoinExecutorConfigurator.scala:57) at java.base/java.util.concurrent.ForkJoinTask.doExec(ForkJoinTask.java:387) at java.base/java.util.concurrent.ForkJoinPool$WorkQueue.topLevelExec(ForkJoinPool.java:1312) at java.base/java.util.concurrent.ForkJoinPool.scan(ForkJoinPool.java:1843) at java.base/java.util.concurrent.ForkJoinPool.runWorker(ForkJoinPool.java:1808) at java.base/java.util.concurrent.ForkJoinWorkerThread.run(ForkJoinWorkerThread.java:188) Caused by: org.opendaylight.yangtools.yang.model.repo.api.MissingSchemaSourceException: All available providers exhausted at org.opendaylight.yangtools.yang.model.repo.spi.AbstractSchemaRepository.lambda$fetchSource$0(AbstractSchemaRepository.java:72) at com.google.common.util.concurrent.AbstractCatchingFuture$AsyncCatchingFuture.doFallback(AbstractCatchingFuture.java:207) at com.google.common.util.concurrent.AbstractCatchingFuture$AsyncCatchingFuture.doFallback(AbstractCatchingFuture.java:194) at com.google.common.util.concurrent.AbstractCatchingFuture.run(AbstractCatchingFuture.java:136) ... 24 more Caused by: org.apache.pekko.pattern.AskTimeoutException: Ask timed out on [Actor[pekko://test@127.0.0.1:2552/user/pekko:test@127.0.0.1:2552_device]] after [1000 ms]. Message of type [org.opendaylight.netconf.topology.singleton.messages.YangTextSchemaSourceRequest]. A typical reason for `AskTimeoutException` is that the recipient actor didn't send a reply. 07:14:00,644 PM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message YangTextSchemaSourceRequest [sourceIdentifier=SourceIdentifier [testID]] 07:14:00,653 PM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: getSchemaSource for SourceIdentifier [testID] succeeded 07:14:00,890 PM [test-pekko.actor.default-dispatcher-10] [INFO] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Schema context resolved: [ModuleEffectiveStatementImpl{argument=Unqualified{localName=testID}}] - registering slave mount point 07:14:00,904 PM [test-pekko.actor.default-dispatcher-10] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point registered. 07:14:00,914 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Operational state for node Uri{value=device} created: Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=Connected, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]} 07:14:00,915 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message org.opendaylight.netconf.topology.singleton.messages.RefreshSlaveActor@3e02b2a 07:14:00,915 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-1373194100]] message to master ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] 07:14:01,932 PM [test-pekko.actor.default-dispatcher-10] [WARN] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Failed to send message to ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] - retrying... org.apache.pekko.pattern.AskTimeoutException: Ask timed out on [ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)]] after [1000 ms]. Message of type [org.opendaylight.netconf.topology.singleton.messages.AskForMasterMountPoint]. A typical reason for `AskTimeoutException` is that the recipient actor didn't send a reply. 07:14:01,938 PM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message AskForMasterMountPoint [slaveActorRef=Actor[pekko://test@127.0.0.1:2550/user/$a#-1373194100]] 07:14:01,938 PM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending RegisterMountPoint reply to Actor[pekko://test@127.0.0.1:2550/user/$a#-1373194100] 07:14:01,941 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message RegisterMountPoint [allSourceIdentifiers=[SourceIdentifier [testID]], masterActorRef=Actor[pekko://test@127.0.0.1:2552/user/pekko:test@127.0.0.1:2552_device]] 07:14:01,942 PM [test-pekko.actor.default-dispatcher-10] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point unregistered. 07:14:01,943 PM [test-pekko.actor.default-dispatcher-10] [INFO] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Schema context resolved: [ModuleEffectiveStatementImpl{argument=Unqualified{localName=testID}}] - registering slave mount point 07:14:01,943 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-1373194100]] message to ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] succeeded 07:14:01,943 PM [test-pekko.actor.default-dispatcher-10] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point registered. 07:14:01,945 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending poison pill to Actor[pekko://test/user/$a#-1373194100] 07:14:01,945 PM [test-pekko.actor.default-dispatcher-10] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point unregistered. 07:14:01,957 PM [test-pekko.actor.default-dispatcher-10] [INFO] CoordinatedShutdown - Running CoordinatedShutdown with reason [ActorSystemTerminateReason] 07:14:01,968 PM [test-pekko.actor.default-dispatcher-10] [INFO] LocalActorRef - pekkoDeadLetter Message [org.apache.pekko.cluster.ClusterUserAction$Leave] to Actor[pekko://test/system/cluster/core/daemon#1082412099] was unhandled. [2] dead letters encountered. This logging can be turned off or adjusted with configuration settings 'pekko.log-dead-letters' and 'pekko.log-dead-letters-during-shutdown'. 07:14:01,969 PM [test-pekko.actor.default-dispatcher-10] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Exiting completed 07:14:01,970 PM [test-pekko.actor.default-dispatcher-10] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Shutting down... 07:14:01,971 PM [test-pekko.actor.default-dispatcher-10] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Successfully shut down 07:14:01,980 PM [test-pekko.actor.default-dispatcher-10] [INFO] RemoteActorRefProvider$RemotingTerminator - Shutting down remote daemon. 07:14:01,981 PM [test-pekko.actor.default-dispatcher-10] [INFO] RemoteActorRefProvider$RemotingTerminator - Remote daemon shut down; proceeding with flushing remote transports. 07:14:02,6 PM [test-pekko.actor.default-dispatcher-10] [WARN] Materializer - [outbound connection to [pekko://test@127.0.0.1:2552], message stream] Upstream failed, cause: StreamTcpException: The connection has been aborted 07:14:02,6 PM [test-pekko.actor.default-dispatcher-10] [WARN] Materializer - [outbound connection to [pekko://test@127.0.0.1:2552], control stream] Upstream failed, cause: StreamTcpException: The connection has been aborted 07:14:02,20 PM [test-pekko.actor.default-dispatcher-10] [INFO] RemoteActorRefProvider$RemotingTerminator - Remoting shut down. 07:14:02,43 PM [test-pekko.actor.default-dispatcher-11] [INFO] CoordinatedShutdown - Running CoordinatedShutdown with reason [ActorSystemTerminateReason] 07:14:02,46 PM [test-pekko.actor.default-dispatcher-11] [INFO] LocalActorRef - pekkoDeadLetter Message [org.apache.pekko.cluster.ClusterUserAction$Leave] to Actor[pekko://test/system/cluster/core/daemon#11387714] was unhandled. [2] dead letters encountered. This logging can be turned off or adjusted with configuration settings 'pekko.log-dead-letters' and 'pekko.log-dead-letters-during-shutdown'. 07:14:02,46 PM [test-pekko.actor.default-dispatcher-11] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Exiting completed 07:14:02,46 PM [test-pekko.actor.default-dispatcher-11] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Shutting down... 07:14:02,46 PM [test-pekko.actor.default-dispatcher-11] [WARN] Cluster - Could not unregister Cluster JMX MBean with name=pekko:type=Cluster as it was not found. If you are running multiple clusters in the same JVM, set 'pekko.cluster.jmx.multi-mbeans-in-same-jvm = on' in config 07:14:02,46 PM [test-pekko.actor.default-dispatcher-11] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Successfully shut down 07:14:02,48 PM [test-pekko.actor.default-dispatcher-11] [INFO] RemoteActorRefProvider$RemotingTerminator - Shutting down remote daemon. 07:14:02,48 PM [test-pekko.actor.default-dispatcher-11] [INFO] RemoteActorRefProvider$RemotingTerminator - Remote daemon shut down; proceeding with flushing remote transports. 07:14:03,69 PM [test-pekko.actor.default-dispatcher-5] [INFO] RemoteActorRefProvider$RemotingTerminator - Remoting shut down. 07:14:03,118 PM [test-pekko.actor.default-dispatcher-6] [INFO] Slf4jLogger - Slf4jLogger started 07:14:03,142 PM [test-pekko.actor.default-dispatcher-6] [INFO] ArteryTransport - Remoting started with transport [Artery tcp]; listening on address [pekko://test@127.0.0.1:2550] with UID [-950769409651187370] 07:14:03,143 PM [test-pekko.actor.default-dispatcher-6] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Starting up, Pekko version [1.0.3] ... 07:14:03,148 PM [test-pekko.actor.default-dispatcher-6] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Registered cluster JMX MBean [pekko:type=Cluster] 07:14:03,148 PM [test-pekko.actor.default-dispatcher-6] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Started up successfully 07:14:03,150 PM [test-pekko.actor.default-dispatcher-6] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - No downing-provider-class configured, manual cluster downing required, see https://pekko.apache.org/docs/pekko/current/typed/cluster.html#downing 07:14:03,150 PM [test-pekko.actor.default-dispatcher-6] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - No seed-nodes configured, manual cluster join required, see https://pekko.apache.org/docs/pekko/current/typed/cluster.html#joining 07:14:03,203 PM [test-pekko.actor.default-dispatcher-6] [INFO] Slf4jLogger - Slf4jLogger started 07:14:03,225 PM [test-pekko.actor.default-dispatcher-6] [INFO] ArteryTransport - Remoting started with transport [Artery tcp]; listening on address [pekko://test@127.0.0.1:2552] with UID [-7480021296857927861] 07:14:03,228 PM [test-pekko.actor.default-dispatcher-6] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Starting up, Pekko version [1.0.3] ... 07:14:03,233 PM [test-pekko.actor.default-dispatcher-6] [WARN] Cluster - Could not register Cluster JMX MBean with name=pekko:type=Cluster as it is already registered. If you are running multiple clusters in the same JVM, set 'pekko.cluster.jmx.multi-mbeans-in-same-jvm = on' in config 07:14:03,234 PM [test-pekko.actor.default-dispatcher-6] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Started up successfully 07:14:03,235 PM [test-pekko.actor.default-dispatcher-6] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - No downing-provider-class configured, manual cluster downing required, see https://pekko.apache.org/docs/pekko/current/typed/cluster.html#downing 07:14:03,235 PM [test-pekko.actor.default-dispatcher-6] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - No seed-nodes configured, manual cluster join required, see https://pekko.apache.org/docs/pekko/current/typed/cluster.html#joining 07:14:03,276 PM [test-pekko.actor.default-dispatcher-6] [DEBUG] NetconfNodeManagerTest$TestMasterActor - Actor created TestActor[pekko://test/user/pekko:test@127.0.0.1:2552_device] 07:14:03,277 PM [test-pekko.actor.default-dispatcher-10] [INFO] EmptyLocalActorRef - pekkoDeadLetter Message [org.opendaylight.controller.cluster.common.actor.Monitor] from TestActor[pekko://test/user/pekko:test@127.0.0.1:2552_device] to Actor[pekko://test/user/termination-monitor] was not delivered. [1] dead letters encountered. If this is not an expected behavior then Actor[pekko://test/user/termination-monitor] may have terminated unexpectedly. This logging can be turned off or adjusted with configuration settings 'pekko.log-dead-letters' and 'pekko.log-dead-letters-during-shutdown'. 07:14:03,281 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message org.opendaylight.netconf.topology.singleton.messages.CreateInitialMasterActorData@26be2f1b 07:14:03,282 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Master is ready. 07:14:03,306 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Registering data tree change listener on path DataObjectIdentifier[ @ urn.tbd.params.xml.ns.yang.network.topology.rev131021.NetworkTopology ... network.topology.Topology[TopologyKey{topologyId=Uri{value=topology-netconf}}] ... topology.Node[NodeKey{nodeId=Uri{value=device}}] ] 07:14:03,308 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Operational state for node Uri{value=device} created: Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=Connected, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]} 07:14:03,309 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave actor created with name Actor[pekko://test/user/$a#1505683826] 07:14:03,309 PM [test-pekko.actor.default-dispatcher-6] [DEBUG] NetconfNodeActor - Actor created Actor[pekko://test/user/$a#1505683826] 07:14:03,310 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#1505683826]] message to master ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] 07:14:03,310 PM [test-pekko.actor.default-dispatcher-10] [INFO] EmptyLocalActorRef - pekkoDeadLetter Message [org.opendaylight.controller.cluster.common.actor.Monitor] from Actor[pekko://test/user/$a#1505683826] to Actor[pekko://test/user/termination-monitor] was not delivered. [1] dead letters encountered. If this is not an expected behavior then Actor[pekko://test/user/termination-monitor] may have terminated unexpectedly. This logging can be turned off or adjusted with configuration settings 'pekko.log-dead-letters' and 'pekko.log-dead-letters-during-shutdown'. 07:14:03,357 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message AskForMasterMountPoint [slaveActorRef=Actor[pekko://test@127.0.0.1:2550/user/$a#1505683826]] 07:14:03,358 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending RegisterMountPoint reply to Actor[pekko://test@127.0.0.1:2550/user/$a#1505683826] 07:14:03,361 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message RegisterMountPoint [allSourceIdentifiers=[SourceIdentifier [testID]], masterActorRef=Actor[pekko://test@127.0.0.1:2552/user/pekko:test@127.0.0.1:2552_device]] 07:14:03,362 PM [test-pekko.actor.default-dispatcher-6] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#1505683826]] message to ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] succeeded 07:14:03,365 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message YangTextSchemaSourceRequest [sourceIdentifier=SourceIdentifier [testID]] 07:14:03,365 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: getSchemaSource for SourceIdentifier [testID] succeeded 07:14:03,376 PM [test-pekko.actor.default-dispatcher-10] [INFO] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Schema context resolved: [ModuleEffectiveStatementImpl{argument=Unqualified{localName=testID}}] - registering slave mount point 07:14:03,377 PM [test-pekko.actor.default-dispatcher-10] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point registered. 07:14:03,387 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Operational state for node Uri{value=device} deleted. 07:14:03,387 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending message to unregister slave mountpoint to Actor[pekko://test/user/$a#1505683826] 07:14:03,388 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message org.opendaylight.netconf.topology.singleton.messages.UnregisterSlaveMountPoint@7b971089 07:14:03,388 PM [test-pekko.actor.default-dispatcher-10] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point unregistered. 07:14:03,400 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Operational state for node Uri{value=device} created: Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=Connected, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]} 07:14:03,401 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message org.opendaylight.netconf.topology.singleton.messages.RefreshSlaveActor@3e95819f 07:14:03,401 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#1505683826]] message to master ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] 07:14:03,405 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message AskForMasterMountPoint [slaveActorRef=Actor[pekko://test@127.0.0.1:2550/user/$a#1505683826]] 07:14:03,406 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending RegisterMountPoint reply to Actor[pekko://test@127.0.0.1:2550/user/$a#1505683826] 07:14:03,409 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message RegisterMountPoint [allSourceIdentifiers=[SourceIdentifier [testID]], masterActorRef=Actor[pekko://test@127.0.0.1:2552/user/pekko:test@127.0.0.1:2552_device]] 07:14:03,409 PM [test-pekko.actor.default-dispatcher-6] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#1505683826]] message to ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] succeeded 07:14:03,409 PM [test-pekko.actor.default-dispatcher-10] [INFO] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Schema context resolved: [ModuleEffectiveStatementImpl{argument=Unqualified{localName=testID}}] - registering slave mount point 07:14:03,410 PM [test-pekko.actor.default-dispatcher-10] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point registered. 07:14:03,413 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Operational state for node Uri{value=device} updated from Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=Connected, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]} to Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=Connected, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]} 07:14:03,414 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message org.opendaylight.netconf.topology.singleton.messages.RefreshSlaveActor@342f9507 07:14:03,414 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#1505683826]] message to master ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] 07:14:03,417 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message AskForMasterMountPoint [slaveActorRef=Actor[pekko://test@127.0.0.1:2550/user/$a#1505683826]] 07:14:03,417 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending RegisterMountPoint reply to Actor[pekko://test@127.0.0.1:2550/user/$a#1505683826] 07:14:03,420 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message RegisterMountPoint [allSourceIdentifiers=[SourceIdentifier [testID]], masterActorRef=Actor[pekko://test@127.0.0.1:2552/user/pekko:test@127.0.0.1:2552_device]] 07:14:03,420 PM [test-pekko.actor.default-dispatcher-10] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point unregistered. 07:14:03,421 PM [test-pekko.actor.default-dispatcher-10] [INFO] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Schema context resolved: [ModuleEffectiveStatementImpl{argument=Unqualified{localName=testID}}] - registering slave mount point 07:14:03,421 PM [test-pekko.actor.default-dispatcher-6] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#1505683826]] message to ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] succeeded 07:14:03,421 PM [test-pekko.actor.default-dispatcher-10] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point registered. 07:14:03,426 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Operational state for node Uri{value=device} - subtree modified from Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=Connected, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]} to Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=UnableToConnect, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]} 07:14:03,426 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending message to unregister slave mountpoint to Actor[pekko://test/user/$a#1505683826] 07:14:03,426 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message org.opendaylight.netconf.topology.singleton.messages.UnregisterSlaveMountPoint@f61dd8d 07:14:03,426 PM [test-pekko.actor.default-dispatcher-10] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point unregistered. 07:14:03,437 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending poison pill to Actor[pekko://test/user/$a#1505683826] 07:14:03,438 PM [test-pekko.actor.default-dispatcher-10] [INFO] CoordinatedShutdown - Running CoordinatedShutdown with reason [ActorSystemTerminateReason] 07:14:03,439 PM [test-pekko.actor.default-dispatcher-10] [INFO] LocalActorRef - pekkoDeadLetter Message [org.apache.pekko.cluster.ClusterUserAction$Leave] to Actor[pekko://test/system/cluster/core/daemon#26779322] was unhandled. [2] dead letters encountered. This logging can be turned off or adjusted with configuration settings 'pekko.log-dead-letters' and 'pekko.log-dead-letters-during-shutdown'. 07:14:03,440 PM [test-pekko.actor.default-dispatcher-10] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Exiting completed 07:14:03,440 PM [test-pekko.actor.default-dispatcher-10] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Shutting down... 07:14:03,440 PM [test-pekko.actor.default-dispatcher-10] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Successfully shut down 07:14:03,443 PM [test-pekko.actor.default-dispatcher-6] [INFO] RemoteActorRefProvider$RemotingTerminator - Shutting down remote daemon. 07:14:03,443 PM [test-pekko.actor.default-dispatcher-6] [INFO] RemoteActorRefProvider$RemotingTerminator - Remote daemon shut down; proceeding with flushing remote transports. 07:14:03,451 PM [test-pekko.actor.default-dispatcher-6] [WARN] Materializer - [outbound connection to [pekko://test@127.0.0.1:2552], control stream] Upstream failed, cause: StreamTcpException: The connection has been aborted 07:14:03,451 PM [test-pekko.actor.default-dispatcher-6] [WARN] Materializer - [outbound connection to [pekko://test@127.0.0.1:2552], message stream] Upstream failed, cause: StreamTcpException: The connection has been aborted 07:14:03,453 PM [test-pekko.actor.default-dispatcher-6] [INFO] RemoteActorRefProvider$RemotingTerminator - Remoting shut down. 07:14:03,468 PM [test-pekko.actor.default-dispatcher-10] [INFO] CoordinatedShutdown - Running CoordinatedShutdown with reason [ActorSystemTerminateReason] 07:14:03,469 PM [test-pekko.actor.default-dispatcher-10] [INFO] LocalActorRef - pekkoDeadLetter Message [org.apache.pekko.cluster.ClusterUserAction$Leave] to Actor[pekko://test/system/cluster/core/daemon#-1871861452] was unhandled. [2] dead letters encountered. This logging can be turned off or adjusted with configuration settings 'pekko.log-dead-letters' and 'pekko.log-dead-letters-during-shutdown'. 07:14:03,470 PM [test-pekko.actor.default-dispatcher-10] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Exiting completed 07:14:03,470 PM [test-pekko.actor.default-dispatcher-10] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Shutting down... 07:14:03,470 PM [test-pekko.actor.default-dispatcher-10] [WARN] Cluster - Could not unregister Cluster JMX MBean with name=pekko:type=Cluster as it was not found. If you are running multiple clusters in the same JVM, set 'pekko.cluster.jmx.multi-mbeans-in-same-jvm = on' in config 07:14:03,471 PM [test-pekko.actor.default-dispatcher-10] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Successfully shut down 07:14:03,473 PM [test-pekko.actor.default-dispatcher-21] [INFO] RemoteActorRefProvider$RemotingTerminator - Shutting down remote daemon. 07:14:03,474 PM [test-pekko.actor.default-dispatcher-21] [INFO] RemoteActorRefProvider$RemotingTerminator - Remote daemon shut down; proceeding with flushing remote transports.