02:56:06,417 PM [test-pekko.actor.default-dispatcher-5] [INFO] Slf4jLogger - Slf4jLogger started
02:56:06,857 PM [test-pekko.actor.default-dispatcher-5] [INFO] ArteryTransport - Remoting started with transport [Artery tcp]; listening on address [pekko://test@127.0.0.1:2550] with UID [4435682077750686172]
02:56:06,874 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Starting up, Pekko version [1.0.3] ...
02:56:07,22 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Registered cluster JMX MBean [pekko:type=Cluster]
02:56:07,22 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Started up successfully
02:56:07,61 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - No downing-provider-class configured, manual cluster downing required, see https://pekko.apache.org/docs/pekko/current/typed/cluster.html#downing
02:56:07,61 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - No seed-nodes configured, manual cluster join required, see https://pekko.apache.org/docs/pekko/current/typed/cluster.html#joining
02:56:07,165 PM [test-pekko.actor.default-dispatcher-5] [INFO] Slf4jLogger - Slf4jLogger started
02:56:07,191 PM [test-pekko.actor.default-dispatcher-5] [INFO] ArteryTransport - Remoting started with transport [Artery tcp]; listening on address [pekko://test@127.0.0.1:2552] with UID [-7353787110061998439]
02:56:07,193 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Starting up, Pekko version [1.0.3] ...
02:56:07,207 PM [test-pekko.actor.default-dispatcher-5] [WARN] Cluster - Could not register Cluster JMX MBean with name=pekko:type=Cluster as it is already registered. If you are running multiple clusters in the same JVM, set 'pekko.cluster.jmx.multi-mbeans-in-same-jvm = on' in config
02:56:07,207 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Started up successfully
02:56:07,227 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - No downing-provider-class configured, manual cluster downing required, see https://pekko.apache.org/docs/pekko/current/typed/cluster.html#downing
02:56:07,227 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - No seed-nodes configured, manual cluster join required, see https://pekko.apache.org/docs/pekko/current/typed/cluster.html#joining
02:56:07,345 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeManagerTest$TestMasterActor - Actor created TestActor[pekko://test/user/pekko:test@127.0.0.1:2552_device]
02:56:07,359 PM [test-pekko.actor.default-dispatcher-10] [INFO] EmptyLocalActorRef -  pekkoDeadLetter Message [org.opendaylight.controller.cluster.common.actor.Monitor] from TestActor[pekko://test/user/pekko:test@127.0.0.1:2552_device] to Actor[pekko://test/user/termination-monitor] was not delivered. [1] dead letters encountered. If this is not an expected behavior then Actor[pekko://test/user/termination-monitor] may have terminated unexpectedly. This logging can be turned off or adjusted with configuration settings 'pekko.log-dead-letters' and 'pekko.log-dead-letters-during-shutdown'.
02:56:07,473 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Operational state for node Uri{value=device} created: Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=Connected, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]}
02:56:07,477 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave actor created with name Actor[pekko://test/user/$a#-1858655510]
02:56:07,477 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeActor - Actor created Actor[pekko://test/user/$a#-1858655510]
02:56:07,479 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-1858655510]] message to master ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)]
02:56:07,479 PM [test-pekko.actor.default-dispatcher-5] [INFO] EmptyLocalActorRef -  pekkoDeadLetter Message [org.opendaylight.controller.cluster.common.actor.Monitor] from Actor[pekko://test/user/$a#-1858655510] to Actor[pekko://test/user/termination-monitor] was not delivered. [1] dead letters encountered. If this is not an expected behavior then Actor[pekko://test/user/termination-monitor] may have terminated unexpectedly. This logging can be turned off or adjusted with configuration settings 'pekko.log-dead-letters' and 'pekko.log-dead-letters-during-shutdown'.
02:56:07,975 PM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]:  received message AskForMasterMountPoint [slaveActorRef=Actor[pekko://test@127.0.0.1:2550/user/$a#-1858655510]]
02:56:07,976 PM [test-pekko.actor.default-dispatcher-11] [WARN] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Received AskForMasterMountPoint [slaveActorRef=Actor[pekko://test@127.0.0.1:2550/user/$a#-1858655510]] but we don't appear to be the master
02:56:07,994 PM [test-pekko.actor.default-dispatcher-5] [ERROR] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Failed to send message AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-1858655510]] to ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)]. Slave mount point could not be created
org.opendaylight.netconf.topology.singleton.messages.NotMasterException: Actor TestActor[pekko://test/user/pekko:test@127.0.0.1:2552_device] is not the current master
	at org.opendaylight.netconf.topology.singleton.impl.actors.NetconfNodeActor.handleReceive(NetconfNodeActor.java:141)
	at org.opendaylight.netconf.topology.singleton.impl.NetconfNodeManagerTest$TestMasterActor.handleReceive(NetconfNodeManagerTest.java:410)
	at org.apache.pekko.japi.pf.UnitCaseStatement.apply(CaseStatements.scala:33)
	at org.apache.pekko.japi.pf.UnitCaseStatement.apply(CaseStatements.scala:29)
	at scala.PartialFunction.applyOrElse(PartialFunction.scala:214)
	at scala.PartialFunction.applyOrElse$(PartialFunction.scala:213)
	at org.apache.pekko.japi.pf.UnitCaseStatement.applyOrElse(CaseStatements.scala:29)
	at scala.PartialFunction$OrElse.applyOrElse(PartialFunction.scala:269)
	at scala.PartialFunction$OrElse.applyOrElse(PartialFunction.scala:270)
	at org.apache.pekko.actor.Actor.aroundReceive(Actor.scala:547)
	at org.apache.pekko.actor.Actor.aroundReceive$(Actor.scala:545)
	at org.apache.pekko.actor.AbstractActor.aroundReceive(AbstractActor.scala:229)
	at org.apache.pekko.actor.ActorCell.receiveMessage(ActorCell.scala:590)
	at org.apache.pekko.actor.ActorCell.invoke(ActorCell.scala:557)
	at org.apache.pekko.dispatch.Mailbox.processMailbox(Mailbox.scala:280)
	at org.apache.pekko.dispatch.Mailbox.run(Mailbox.scala:241)
	at org.apache.pekko.dispatch.Mailbox.exec(Mailbox.scala:253)
	at java.base/java.util.concurrent.ForkJoinTask.doExec(ForkJoinTask.java:387)
	at java.base/java.util.concurrent.ForkJoinPool$WorkQueue.topLevelExec(ForkJoinPool.java:1312)
	at java.base/java.util.concurrent.ForkJoinPool.scan(ForkJoinPool.java:1843)
	at java.base/java.util.concurrent.ForkJoinPool.runWorker(ForkJoinPool.java:1808)
	at java.base/java.util.concurrent.ForkJoinWorkerThread.run(ForkJoinWorkerThread.java:188)
02:56:08,543 PM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]:  received message org.opendaylight.netconf.topology.singleton.messages.CreateInitialMasterActorData@5df8bbd1
02:56:08,549 PM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Master is ready.
02:56:08,551 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Operational state for node Uri{value=device} created: Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=Connected, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]}
02:56:08,554 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]:  received message org.opendaylight.netconf.topology.singleton.messages.RefreshSlaveActor@5a7ffafd
02:56:08,554 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-1858655510]] message to master ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)]
02:56:08,562 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]:  received message AskForMasterMountPoint [slaveActorRef=Actor[pekko://test@127.0.0.1:2550/user/$a#-1858655510]]
02:56:08,562 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending RegisterMountPoint reply to Actor[pekko://test@127.0.0.1:2550/user/$a#-1858655510]
02:56:08,584 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]:  received message RegisterMountPoint [allSourceIdentifiers=[SourceIdentifier [testID]], masterActorRef=Actor[pekko://test@127.0.0.1:2552/user/pekko:test@127.0.0.1:2552_device]]
02:56:08,610 PM [test-pekko.actor.default-dispatcher-5] [INFO] SharedEffectiveModelContextFactory - Using weak references
02:56:08,636 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-1858655510]] message to ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] succeeded
02:56:09,655 PM [test-pekko.actor.default-dispatcher-5] [WARN] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Failed to resolve schema context - retrying...
org.opendaylight.yangtools.yang.model.repo.api.MissingSchemaSourceException: All available providers exhausted
	at org.opendaylight.yangtools.yang.model.repo.spi.AbstractSchemaRepository.lambda$fetchSource$0(AbstractSchemaRepository.java:72)
	at com.google.common.util.concurrent.AbstractCatchingFuture$AsyncCatchingFuture.doFallback(AbstractCatchingFuture.java:207)
	at com.google.common.util.concurrent.AbstractCatchingFuture$AsyncCatchingFuture.doFallback(AbstractCatchingFuture.java:194)
	at com.google.common.util.concurrent.AbstractCatchingFuture.run(AbstractCatchingFuture.java:136)
	at com.google.common.util.concurrent.DirectExecutor.execute(DirectExecutor.java:30)
	at com.google.common.util.concurrent.AbstractFuture.executeListener(AbstractFuture.java:1004)
	at com.google.common.util.concurrent.AbstractFuture.complete(AbstractFuture.java:767)
	at com.google.common.util.concurrent.AbstractFuture.setException(AbstractFuture.java:516)
	at com.google.common.util.concurrent.AbstractTransformFuture.run(AbstractTransformFuture.java:108)
	at com.google.common.util.concurrent.DirectExecutor.execute(DirectExecutor.java:30)
	at com.google.common.util.concurrent.AbstractFuture.executeListener(AbstractFuture.java:1004)
	at com.google.common.util.concurrent.AbstractFuture.complete(AbstractFuture.java:767)
	at com.google.common.util.concurrent.AbstractFuture.setException(AbstractFuture.java:516)
	at com.google.common.util.concurrent.AbstractCatchingFuture.run(AbstractCatchingFuture.java:139)
	at com.google.common.util.concurrent.DirectExecutor.execute(DirectExecutor.java:30)
	at com.google.common.util.concurrent.AbstractFuture.executeListener(AbstractFuture.java:1004)
	at com.google.common.util.concurrent.AbstractFuture.complete(AbstractFuture.java:767)
	at com.google.common.util.concurrent.AbstractFuture.setException(AbstractFuture.java:516)
	at com.google.common.util.concurrent.SettableFuture.setException(SettableFuture.java:54)
	at org.opendaylight.controller.cluster.schema.provider.impl.RemoteSchemaProvider$1.onComplete(RemoteSchemaProvider.java:50)
	at org.opendaylight.controller.cluster.schema.provider.impl.RemoteSchemaProvider$1.onComplete(RemoteSchemaProvider.java:43)
	at org.apache.pekko.dispatch.OnComplete.internal(Future.scala:309)
	at org.apache.pekko.dispatch.OnComplete.internal(Future.scala:307)
	at org.apache.pekko.dispatch.japi$CallbackBridge.apply(Future.scala:234)
	at org.apache.pekko.dispatch.japi$CallbackBridge.apply(Future.scala:231)
	at scala.concurrent.impl.Promise$Transformation.run(Promise.scala:484)
	at org.apache.pekko.dispatch.BatchingExecutor$AbstractBatch.processBatch(BatchingExecutor.scala:73)
	at org.apache.pekko.dispatch.BatchingExecutor$BlockableBatch.$anonfun$run$1(BatchingExecutor.scala:110)
	at scala.runtime.java8.JFunction0$mcV$sp.apply(JFunction0$mcV$sp.scala:18)
	at scala.concurrent.BlockContext$.withBlockContext(BlockContext.scala:94)
	at org.apache.pekko.dispatch.BatchingExecutor$BlockableBatch.run(BatchingExecutor.scala:110)
	at org.apache.pekko.dispatch.TaskInvocation.run(AbstractDispatcher.scala:59)
	at org.apache.pekko.dispatch.ForkJoinExecutorConfigurator$PekkoForkJoinTask.exec(ForkJoinExecutorConfigurator.scala:57)
	at java.base/java.util.concurrent.ForkJoinTask.doExec(ForkJoinTask.java:387)
	at java.base/java.util.concurrent.ForkJoinPool$WorkQueue.topLevelExec(ForkJoinPool.java:1312)
	at java.base/java.util.concurrent.ForkJoinPool.scan(ForkJoinPool.java:1843)
	at java.base/java.util.concurrent.ForkJoinPool.runWorker(ForkJoinPool.java:1808)
	at java.base/java.util.concurrent.ForkJoinWorkerThread.run(ForkJoinWorkerThread.java:188)
Caused by: org.opendaylight.yangtools.yang.model.repo.api.MissingSchemaSourceException: All available providers exhausted
	at org.opendaylight.yangtools.yang.model.repo.spi.AbstractSchemaRepository.lambda$fetchSource$0(AbstractSchemaRepository.java:72)
	at com.google.common.util.concurrent.AbstractCatchingFuture$AsyncCatchingFuture.doFallback(AbstractCatchingFuture.java:207)
	at com.google.common.util.concurrent.AbstractCatchingFuture$AsyncCatchingFuture.doFallback(AbstractCatchingFuture.java:194)
	at com.google.common.util.concurrent.AbstractCatchingFuture.run(AbstractCatchingFuture.java:136)
	... 24 more
Caused by: org.apache.pekko.pattern.AskTimeoutException: Ask timed out on [Actor[pekko://test@127.0.0.1:2552/user/pekko:test@127.0.0.1:2552_device]] after [1000 ms]. Message of type [org.opendaylight.netconf.topology.singleton.messages.YangTextSchemaSourceRequest]. A typical reason for `AskTimeoutException` is that the recipient actor didn't send a reply.
02:56:09,662 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]:  received message YangTextSchemaSourceRequest [sourceIdentifier=SourceIdentifier [testID]]
02:56:09,675 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: getSchemaSource for SourceIdentifier [testID] succeeded
02:56:09,936 PM [test-pekko.actor.default-dispatcher-10] [INFO] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Schema context resolved: [ModuleEffectiveStatementImpl{argument=Unqualified{localName=testID}}] - registering slave mount point
02:56:09,943 PM [test-pekko.actor.default-dispatcher-10] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point registered.
02:56:09,953 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Operational state for node Uri{value=device} created: Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=Connected, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]}
02:56:09,954 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]:  received message org.opendaylight.netconf.topology.singleton.messages.RefreshSlaveActor@7b03168a
02:56:09,954 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-1858655510]] message to master ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)]
02:56:10,967 PM [test-pekko.actor.default-dispatcher-5] [WARN] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Failed to send message to ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] - retrying...
org.apache.pekko.pattern.AskTimeoutException: Ask timed out on [ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)]] after [1000 ms]. Message of type [org.opendaylight.netconf.topology.singleton.messages.AskForMasterMountPoint]. A typical reason for `AskTimeoutException` is that the recipient actor didn't send a reply.
02:56:10,973 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]:  received message AskForMasterMountPoint [slaveActorRef=Actor[pekko://test@127.0.0.1:2550/user/$a#-1858655510]]
02:56:10,974 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending RegisterMountPoint reply to Actor[pekko://test@127.0.0.1:2550/user/$a#-1858655510]
02:56:10,979 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]:  received message RegisterMountPoint [allSourceIdentifiers=[SourceIdentifier [testID]], masterActorRef=Actor[pekko://test@127.0.0.1:2552/user/pekko:test@127.0.0.1:2552_device]]
02:56:10,979 PM [test-pekko.actor.default-dispatcher-5] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point unregistered.
02:56:10,981 PM [test-pekko.actor.default-dispatcher-5] [INFO] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Schema context resolved: [ModuleEffectiveStatementImpl{argument=Unqualified{localName=testID}}] - registering slave mount point
02:56:10,981 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-1858655510]] message to ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] succeeded
02:56:10,982 PM [test-pekko.actor.default-dispatcher-5] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point registered.
02:56:10,986 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending poison pill to Actor[pekko://test/user/$a#-1858655510]
02:56:10,987 PM [test-pekko.actor.default-dispatcher-5] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point unregistered.
02:56:11,0 PM [test-pekko.actor.default-dispatcher-5] [INFO] CoordinatedShutdown - Running CoordinatedShutdown with reason [ActorSystemTerminateReason]
02:56:11,13 PM [test-pekko.actor.default-dispatcher-5] [INFO] LocalActorRef -  pekkoDeadLetter Message [org.apache.pekko.cluster.ClusterUserAction$Leave] to Actor[pekko://test/system/cluster/core/daemon#56523338] was unhandled. [2] dead letters encountered. This logging can be turned off or adjusted with configuration settings 'pekko.log-dead-letters' and 'pekko.log-dead-letters-during-shutdown'.
02:56:11,14 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Exiting completed
02:56:11,15 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Shutting down...
02:56:11,16 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Successfully shut down
02:56:11,24 PM [test-pekko.actor.default-dispatcher-10] [INFO] RemoteActorRefProvider$RemotingTerminator - Shutting down remote daemon.
02:56:11,27 PM [test-pekko.actor.default-dispatcher-5] [INFO] RemoteActorRefProvider$RemotingTerminator - Remote daemon shut down; proceeding with flushing remote transports.
02:56:11,56 PM [test-pekko.actor.default-dispatcher-5] [WARN] Materializer - [outbound connection to [pekko://test@127.0.0.1:2552], message stream] Upstream failed, cause: StreamTcpException: The connection has been aborted
02:56:11,57 PM [test-pekko.actor.default-dispatcher-5] [WARN] Materializer - [outbound connection to [pekko://test@127.0.0.1:2552], control stream] Upstream failed, cause: StreamTcpException: The connection has been aborted
02:56:11,68 PM [test-pekko.actor.default-dispatcher-5] [INFO] RemoteActorRefProvider$RemotingTerminator - Remoting shut down.
02:56:11,91 PM [test-pekko.actor.default-dispatcher-10] [INFO] CoordinatedShutdown - Running CoordinatedShutdown with reason [ActorSystemTerminateReason]
02:56:11,93 PM [test-pekko.actor.default-dispatcher-11] [INFO] LocalActorRef -  pekkoDeadLetter Message [org.apache.pekko.cluster.ClusterUserAction$Leave] to Actor[pekko://test/system/cluster/core/daemon#-2008770355] was unhandled. [2] dead letters encountered. This logging can be turned off or adjusted with configuration settings 'pekko.log-dead-letters' and 'pekko.log-dead-letters-during-shutdown'.
02:56:11,94 PM [test-pekko.actor.default-dispatcher-11] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Exiting completed
02:56:11,94 PM [test-pekko.actor.default-dispatcher-11] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Shutting down...
02:56:11,94 PM [test-pekko.actor.default-dispatcher-11] [WARN] Cluster - Could not unregister Cluster JMX MBean with name=pekko:type=Cluster as it was not found. If you are running multiple clusters in the same JVM, set 'pekko.cluster.jmx.multi-mbeans-in-same-jvm = on' in config
02:56:11,95 PM [test-pekko.actor.default-dispatcher-11] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Successfully shut down
02:56:11,98 PM [test-pekko.actor.default-dispatcher-11] [INFO] RemoteActorRefProvider$RemotingTerminator - Shutting down remote daemon.
02:56:11,98 PM [test-pekko.actor.default-dispatcher-11] [INFO] RemoteActorRefProvider$RemotingTerminator - Remote daemon shut down; proceeding with flushing remote transports.
02:56:12,119 PM [test-pekko.actor.default-dispatcher-10] [INFO] RemoteActorRefProvider$RemotingTerminator - Remoting shut down.
02:56:12,160 PM [test-pekko.actor.default-dispatcher-5] [INFO] Slf4jLogger - Slf4jLogger started
02:56:12,178 PM [test-pekko.actor.default-dispatcher-5] [INFO] ArteryTransport - Remoting started with transport [Artery tcp]; listening on address [pekko://test@127.0.0.1:2550] with UID [-2464181546682388648]
02:56:12,179 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Starting up, Pekko version [1.0.3] ...
02:56:12,183 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Registered cluster JMX MBean [pekko:type=Cluster]
02:56:12,183 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Started up successfully
02:56:12,186 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - No downing-provider-class configured, manual cluster downing required, see https://pekko.apache.org/docs/pekko/current/typed/cluster.html#downing
02:56:12,187 PM [test-pekko.actor.default-dispatcher-10] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - No seed-nodes configured, manual cluster join required, see https://pekko.apache.org/docs/pekko/current/typed/cluster.html#joining
02:56:12,226 PM [test-pekko.actor.default-dispatcher-5] [INFO] Slf4jLogger - Slf4jLogger started
02:56:12,253 PM [test-pekko.actor.default-dispatcher-5] [INFO] ArteryTransport - Remoting started with transport [Artery tcp]; listening on address [pekko://test@127.0.0.1:2552] with UID [346364296142365710]
02:56:12,255 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Starting up, Pekko version [1.0.3] ...
02:56:12,258 PM [test-pekko.actor.default-dispatcher-5] [WARN] Cluster - Could not register Cluster JMX MBean with name=pekko:type=Cluster as it is already registered. If you are running multiple clusters in the same JVM, set 'pekko.cluster.jmx.multi-mbeans-in-same-jvm = on' in config
02:56:12,258 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Started up successfully
02:56:12,262 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - No downing-provider-class configured, manual cluster downing required, see https://pekko.apache.org/docs/pekko/current/typed/cluster.html#downing
02:56:12,262 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - No seed-nodes configured, manual cluster join required, see https://pekko.apache.org/docs/pekko/current/typed/cluster.html#joining
02:56:12,294 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeManagerTest$TestMasterActor - Actor created TestActor[pekko://test/user/pekko:test@127.0.0.1:2552_device]
02:56:12,301 PM [test-pekko.actor.default-dispatcher-5] [INFO] EmptyLocalActorRef -  pekkoDeadLetter Message [org.opendaylight.controller.cluster.common.actor.Monitor] from TestActor[pekko://test/user/pekko:test@127.0.0.1:2552_device] to Actor[pekko://test/user/termination-monitor] was not delivered. [1] dead letters encountered. If this is not an expected behavior then Actor[pekko://test/user/termination-monitor] may have terminated unexpectedly. This logging can be turned off or adjusted with configuration settings 'pekko.log-dead-letters' and 'pekko.log-dead-letters-during-shutdown'.
02:56:12,311 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]:  received message org.opendaylight.netconf.topology.singleton.messages.CreateInitialMasterActorData@513b4d7e
02:56:12,313 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Master is ready.
02:56:12,329 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Registering data tree change listener on path DataObjectIdentifier[
  @ urn.tbd.params.xml.ns.yang.network.topology.rev131021.NetworkTopology
  ... network.topology.Topology[TopologyKey{topologyId=Uri{value=topology-netconf}}]
  ... topology.Node[NodeKey{nodeId=Uri{value=device}}]
]
02:56:12,332 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Operational state for node Uri{value=device} created: Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=Connected, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]}
02:56:12,333 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave actor created with name Actor[pekko://test/user/$a#1190619025]
02:56:12,333 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeActor - Actor created Actor[pekko://test/user/$a#1190619025]
02:56:12,334 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#1190619025]] message to master ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)]
02:56:12,334 PM [test-pekko.actor.default-dispatcher-10] [INFO] EmptyLocalActorRef -  pekkoDeadLetter Message [org.opendaylight.controller.cluster.common.actor.Monitor] from Actor[pekko://test/user/$a#1190619025] to Actor[pekko://test/user/termination-monitor] was not delivered. [1] dead letters encountered. If this is not an expected behavior then Actor[pekko://test/user/termination-monitor] may have terminated unexpectedly. This logging can be turned off or adjusted with configuration settings 'pekko.log-dead-letters' and 'pekko.log-dead-letters-during-shutdown'.
02:56:12,384 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]:  received message AskForMasterMountPoint [slaveActorRef=Actor[pekko://test@127.0.0.1:2550/user/$a#1190619025]]
02:56:12,385 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending RegisterMountPoint reply to Actor[pekko://test@127.0.0.1:2550/user/$a#1190619025]
02:56:12,389 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]:  received message RegisterMountPoint [allSourceIdentifiers=[SourceIdentifier [testID]], masterActorRef=Actor[pekko://test@127.0.0.1:2552/user/pekko:test@127.0.0.1:2552_device]]
02:56:12,391 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#1190619025]] message to ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] succeeded
02:56:12,393 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]:  received message YangTextSchemaSourceRequest [sourceIdentifier=SourceIdentifier [testID]]
02:56:12,394 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: getSchemaSource for SourceIdentifier [testID] succeeded
02:56:12,403 PM [test-pekko.actor.default-dispatcher-5] [INFO] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Schema context resolved: [ModuleEffectiveStatementImpl{argument=Unqualified{localName=testID}}] - registering slave mount point
02:56:12,404 PM [test-pekko.actor.default-dispatcher-5] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point registered.
02:56:12,413 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Operational state for node Uri{value=device} deleted.
02:56:12,414 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending message to unregister slave mountpoint to Actor[pekko://test/user/$a#1190619025]
02:56:12,414 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]:  received message org.opendaylight.netconf.topology.singleton.messages.UnregisterSlaveMountPoint@4d4e5b5b
02:56:12,414 PM [test-pekko.actor.default-dispatcher-5] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point unregistered.
02:56:12,426 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Operational state for node Uri{value=device} created: Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=Connected, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]}
02:56:12,427 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]:  received message org.opendaylight.netconf.topology.singleton.messages.RefreshSlaveActor@6a27132b
02:56:12,427 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#1190619025]] message to master ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)]
02:56:12,433 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]:  received message AskForMasterMountPoint [slaveActorRef=Actor[pekko://test@127.0.0.1:2550/user/$a#1190619025]]
02:56:12,433 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending RegisterMountPoint reply to Actor[pekko://test@127.0.0.1:2550/user/$a#1190619025]
02:56:12,437 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]:  received message RegisterMountPoint [allSourceIdentifiers=[SourceIdentifier [testID]], masterActorRef=Actor[pekko://test@127.0.0.1:2552/user/pekko:test@127.0.0.1:2552_device]]
02:56:12,437 PM [test-pekko.actor.default-dispatcher-5] [INFO] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Schema context resolved: [ModuleEffectiveStatementImpl{argument=Unqualified{localName=testID}}] - registering slave mount point
02:56:12,437 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#1190619025]] message to ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] succeeded
02:56:12,438 PM [test-pekko.actor.default-dispatcher-5] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point registered.
02:56:12,441 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Operational state for node Uri{value=device} updated from Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=Connected, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]} to Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=Connected, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]}
02:56:12,442 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]:  received message org.opendaylight.netconf.topology.singleton.messages.RefreshSlaveActor@7cc9b75e
02:56:12,442 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#1190619025]] message to master ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)]
02:56:12,446 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]:  received message AskForMasterMountPoint [slaveActorRef=Actor[pekko://test@127.0.0.1:2550/user/$a#1190619025]]
02:56:12,447 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending RegisterMountPoint reply to Actor[pekko://test@127.0.0.1:2550/user/$a#1190619025]
02:56:12,451 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]:  received message RegisterMountPoint [allSourceIdentifiers=[SourceIdentifier [testID]], masterActorRef=Actor[pekko://test@127.0.0.1:2552/user/pekko:test@127.0.0.1:2552_device]]
02:56:12,451 PM [test-pekko.actor.default-dispatcher-5] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point unregistered.
02:56:12,452 PM [test-pekko.actor.default-dispatcher-5] [INFO] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Schema context resolved: [ModuleEffectiveStatementImpl{argument=Unqualified{localName=testID}}] - registering slave mount point
02:56:12,452 PM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#1190619025]] message to ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] succeeded
02:56:12,452 PM [test-pekko.actor.default-dispatcher-5] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point registered.
02:56:12,454 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Operational state for node Uri{value=device} - subtree modified from Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=Connected, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]} to Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=UnableToConnect, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]}
02:56:12,455 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending message to unregister slave mountpoint to Actor[pekko://test/user/$a#1190619025]
02:56:12,455 PM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]:  received message org.opendaylight.netconf.topology.singleton.messages.UnregisterSlaveMountPoint@124aa185
02:56:12,455 PM [test-pekko.actor.default-dispatcher-5] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point unregistered.
02:56:12,465 PM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending poison pill to Actor[pekko://test/user/$a#1190619025]
02:56:12,467 PM [test-pekko.actor.default-dispatcher-5] [INFO] CoordinatedShutdown - Running CoordinatedShutdown with reason [ActorSystemTerminateReason]
02:56:12,468 PM [test-pekko.actor.default-dispatcher-5] [INFO] LocalActorRef -  pekkoDeadLetter Message [org.apache.pekko.cluster.ClusterUserAction$Leave] to Actor[pekko://test/system/cluster/core/daemon#-377975998] was unhandled. [2] dead letters encountered. This logging can be turned off or adjusted with configuration settings 'pekko.log-dead-letters' and 'pekko.log-dead-letters-during-shutdown'.
02:56:12,469 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Exiting completed
02:56:12,469 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Shutting down...
02:56:12,469 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Successfully shut down
02:56:12,473 PM [test-pekko.actor.default-dispatcher-10] [INFO] RemoteActorRefProvider$RemotingTerminator - Shutting down remote daemon.
02:56:12,473 PM [test-pekko.actor.default-dispatcher-10] [INFO] RemoteActorRefProvider$RemotingTerminator - Remote daemon shut down; proceeding with flushing remote transports.
02:56:12,484 PM [test-pekko.actor.default-dispatcher-10] [WARN] Materializer - [outbound connection to [pekko://test@127.0.0.1:2552], message stream] Upstream failed, cause: StreamTcpException: The connection has been aborted
02:56:12,486 PM [test-pekko.actor.default-dispatcher-10] [WARN] Materializer - [outbound connection to [pekko://test@127.0.0.1:2552], control stream] Upstream failed, cause: StreamTcpException: The connection has been aborted
02:56:12,489 PM [test-pekko.actor.default-dispatcher-10] [INFO] RemoteActorRefProvider$RemotingTerminator - Remoting shut down.
02:56:12,506 PM [test-pekko.actor.default-dispatcher-5] [INFO] CoordinatedShutdown - Running CoordinatedShutdown with reason [ActorSystemTerminateReason]
02:56:12,510 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Exiting completed
02:56:12,510 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Shutting down...
02:56:12,510 PM [test-pekko.actor.default-dispatcher-5] [WARN] Cluster - Could not unregister Cluster JMX MBean with name=pekko:type=Cluster as it was not found. If you are running multiple clusters in the same JVM, set 'pekko.cluster.jmx.multi-mbeans-in-same-jvm = on' in config
02:56:12,511 PM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Successfully shut down
02:56:12,511 PM [test-pekko.actor.default-dispatcher-5] [INFO] LocalActorRef -  pekkoDeadLetter Message [org.apache.pekko.cluster.ClusterUserAction$Leave] to Actor[pekko://test/system/cluster/core/daemon#-1514433460] was unhandled. [2] dead letters encountered. This logging can be turned off or adjusted with configuration settings 'pekko.log-dead-letters' and 'pekko.log-dead-letters-during-shutdown'.
02:56:12,514 PM [test-pekko.actor.default-dispatcher-10] [INFO] RemoteActorRefProvider$RemotingTerminator - Shutting down remote daemon.
02:56:12,514 PM [test-pekko.actor.default-dispatcher-10] [INFO] RemoteActorRefProvider$RemotingTerminator - Remote daemon shut down; proceeding with flushing remote transports.
02:56:13,534 PM [test-pekko.actor.default-dispatcher-10] [INFO] RemoteActorRefProvider$RemotingTerminator - Remoting shut down.