05:40:42,493 AM [test-pekko.actor.default-dispatcher-5] [INFO] Slf4jLogger - Slf4jLogger started 05:40:42,930 AM [test-pekko.actor.default-dispatcher-5] [INFO] ArteryTransport - Remoting started with transport [Artery tcp]; listening on address [pekko://test@127.0.0.1:2550] with UID [-527881538120893558] 05:40:42,948 AM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Starting up, Pekko version [1.0.3] ... 05:40:43,67 AM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Registered cluster JMX MBean [pekko:type=Cluster] 05:40:43,68 AM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Started up successfully 05:40:43,127 AM [test-pekko.actor.default-dispatcher-10] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - No downing-provider-class configured, manual cluster downing required, see https://pekko.apache.org/docs/pekko/current/typed/cluster.html#downing 05:40:43,127 AM [test-pekko.actor.default-dispatcher-10] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - No seed-nodes configured, manual cluster join required, see https://pekko.apache.org/docs/pekko/current/typed/cluster.html#joining 05:40:43,165 AM [test-pekko.actor.default-dispatcher-5] [INFO] Slf4jLogger - Slf4jLogger started 05:40:43,198 AM [test-pekko.actor.default-dispatcher-5] [INFO] ArteryTransport - Remoting started with transport [Artery tcp]; listening on address [pekko://test@127.0.0.1:2552] with UID [-2258057759682262412] 05:40:43,199 AM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Starting up, Pekko version [1.0.3] ... 05:40:43,211 AM [test-pekko.actor.default-dispatcher-5] [WARN] Cluster - Could not register Cluster JMX MBean with name=pekko:type=Cluster as it is already registered. If you are running multiple clusters in the same JVM, set 'pekko.cluster.jmx.multi-mbeans-in-same-jvm = on' in config 05:40:43,211 AM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Started up successfully 05:40:43,213 AM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - No downing-provider-class configured, manual cluster downing required, see https://pekko.apache.org/docs/pekko/current/typed/cluster.html#downing 05:40:43,213 AM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - No seed-nodes configured, manual cluster join required, see https://pekko.apache.org/docs/pekko/current/typed/cluster.html#joining 05:40:43,359 AM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeManagerTest$TestMasterActor - Actor created TestActor[pekko://test/user/pekko:test@127.0.0.1:2552_device] 05:40:43,387 AM [test-pekko.actor.default-dispatcher-10] [INFO] EmptyLocalActorRef - pekkoDeadLetter Message [org.opendaylight.controller.cluster.common.actor.Monitor] from TestActor[pekko://test/user/pekko:test@127.0.0.1:2552_device] to Actor[pekko://test/user/termination-monitor] was not delivered. [1] dead letters encountered. If this is not an expected behavior then Actor[pekko://test/user/termination-monitor] may have terminated unexpectedly. This logging can be turned off or adjusted with configuration settings 'pekko.log-dead-letters' and 'pekko.log-dead-letters-during-shutdown'. 05:40:43,542 AM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Operational state for node Uri{value=device} created: Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=Connected, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]} 05:40:43,546 AM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeActor - Actor created Actor[pekko://test/user/$a#-1323374981] 05:40:43,546 AM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave actor created with name Actor[pekko://test/user/$a#-1323374981] 05:40:43,548 AM [test-pekko.actor.default-dispatcher-10] [INFO] EmptyLocalActorRef - pekkoDeadLetter Message [org.opendaylight.controller.cluster.common.actor.Monitor] from Actor[pekko://test/user/$a#-1323374981] to Actor[pekko://test/user/termination-monitor] was not delivered. [1] dead letters encountered. If this is not an expected behavior then Actor[pekko://test/user/termination-monitor] may have terminated unexpectedly. This logging can be turned off or adjusted with configuration settings 'pekko.log-dead-letters' and 'pekko.log-dead-letters-during-shutdown'. 05:40:43,549 AM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-1323374981]] message to master ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] 05:40:44,57 AM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message AskForMasterMountPoint [slaveActorRef=Actor[pekko://test@127.0.0.1:2550/user/$a#-1323374981]] 05:40:44,58 AM [test-pekko.actor.default-dispatcher-11] [WARN] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Received AskForMasterMountPoint [slaveActorRef=Actor[pekko://test@127.0.0.1:2550/user/$a#-1323374981]] but we don't appear to be the master 05:40:44,95 AM [test-pekko.actor.default-dispatcher-5] [ERROR] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Failed to send message AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-1323374981]] to ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)]. Slave mount point could not be created org.opendaylight.netconf.topology.singleton.messages.NotMasterException: Actor TestActor[pekko://test/user/pekko:test@127.0.0.1:2552_device] is not the current master at org.opendaylight.netconf.topology.singleton.impl.actors.NetconfNodeActor.handleReceive(NetconfNodeActor.java:141) at org.opendaylight.netconf.topology.singleton.impl.NetconfNodeManagerTest$TestMasterActor.handleReceive(NetconfNodeManagerTest.java:413) at org.apache.pekko.japi.pf.UnitCaseStatement.apply(CaseStatements.scala:33) at org.apache.pekko.japi.pf.UnitCaseStatement.apply(CaseStatements.scala:29) at scala.PartialFunction.applyOrElse(PartialFunction.scala:214) at scala.PartialFunction.applyOrElse$(PartialFunction.scala:213) at org.apache.pekko.japi.pf.UnitCaseStatement.applyOrElse(CaseStatements.scala:29) at scala.PartialFunction$OrElse.applyOrElse(PartialFunction.scala:269) at scala.PartialFunction$OrElse.applyOrElse(PartialFunction.scala:270) at org.apache.pekko.actor.Actor.aroundReceive(Actor.scala:547) at org.apache.pekko.actor.Actor.aroundReceive$(Actor.scala:545) at org.apache.pekko.actor.AbstractActor.aroundReceive(AbstractActor.scala:229) at org.apache.pekko.actor.ActorCell.receiveMessage(ActorCell.scala:590) at org.apache.pekko.actor.ActorCell.invoke(ActorCell.scala:557) at org.apache.pekko.dispatch.Mailbox.processMailbox(Mailbox.scala:280) at org.apache.pekko.dispatch.Mailbox.run(Mailbox.scala:241) at org.apache.pekko.dispatch.Mailbox.exec(Mailbox.scala:253) at java.base/java.util.concurrent.ForkJoinTask.doExec(ForkJoinTask.java:387) at java.base/java.util.concurrent.ForkJoinPool$WorkQueue.topLevelExec(ForkJoinPool.java:1312) at java.base/java.util.concurrent.ForkJoinPool.scan(ForkJoinPool.java:1843) at java.base/java.util.concurrent.ForkJoinPool.runWorker(ForkJoinPool.java:1808) at java.base/java.util.concurrent.ForkJoinWorkerThread.run(ForkJoinWorkerThread.java:188) 05:40:44,616 AM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message org.opendaylight.netconf.topology.singleton.messages.CreateInitialMasterActorData@1b3f79d2 05:40:44,624 AM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Master is ready. 05:40:44,628 AM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Operational state for node Uri{value=device} created: Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=Connected, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]} 05:40:44,630 AM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message org.opendaylight.netconf.topology.singleton.messages.RefreshSlaveActor@4191a5d5 05:40:44,630 AM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-1323374981]] message to master ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] 05:40:44,636 AM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message AskForMasterMountPoint [slaveActorRef=Actor[pekko://test@127.0.0.1:2550/user/$a#-1323374981]] 05:40:44,637 AM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending RegisterMountPoint reply to Actor[pekko://test@127.0.0.1:2550/user/$a#-1323374981] 05:40:44,664 AM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message RegisterMountPoint [allSourceIdentifiers=[SourceIdentifier [testID]], masterActorRef=Actor[pekko://test@127.0.0.1:2552/user/pekko:test@127.0.0.1:2552_device]] 05:40:44,695 AM [test-pekko.actor.default-dispatcher-5] [INFO] SharedEffectiveModelContextFactory - Using weak references 05:40:44,722 AM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-1323374981]] message to ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] succeeded 05:40:45,734 AM [test-pekko.actor.default-dispatcher-10] [WARN] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Failed to resolve schema context - retrying... org.opendaylight.yangtools.yang.model.repo.api.MissingSchemaSourceException: All available providers exhausted at org.opendaylight.yangtools.yang.model.repo.spi.AbstractSchemaRepository.lambda$fetchSource$0(AbstractSchemaRepository.java:72) at com.google.common.util.concurrent.AbstractCatchingFuture$AsyncCatchingFuture.doFallback(AbstractCatchingFuture.java:207) at com.google.common.util.concurrent.AbstractCatchingFuture$AsyncCatchingFuture.doFallback(AbstractCatchingFuture.java:194) at com.google.common.util.concurrent.AbstractCatchingFuture.run(AbstractCatchingFuture.java:136) at com.google.common.util.concurrent.DirectExecutor.execute(DirectExecutor.java:30) at com.google.common.util.concurrent.AbstractFuture.executeListener(AbstractFuture.java:1004) at com.google.common.util.concurrent.AbstractFuture.complete(AbstractFuture.java:767) at com.google.common.util.concurrent.AbstractFuture.setException(AbstractFuture.java:516) at com.google.common.util.concurrent.AbstractTransformFuture.run(AbstractTransformFuture.java:108) at com.google.common.util.concurrent.DirectExecutor.execute(DirectExecutor.java:30) at com.google.common.util.concurrent.AbstractFuture.executeListener(AbstractFuture.java:1004) at com.google.common.util.concurrent.AbstractFuture.complete(AbstractFuture.java:767) at com.google.common.util.concurrent.AbstractFuture.setException(AbstractFuture.java:516) at com.google.common.util.concurrent.AbstractCatchingFuture.run(AbstractCatchingFuture.java:139) at com.google.common.util.concurrent.DirectExecutor.execute(DirectExecutor.java:30) at com.google.common.util.concurrent.AbstractFuture.executeListener(AbstractFuture.java:1004) at com.google.common.util.concurrent.AbstractFuture.complete(AbstractFuture.java:767) at com.google.common.util.concurrent.AbstractFuture.setException(AbstractFuture.java:516) at com.google.common.util.concurrent.SettableFuture.setException(SettableFuture.java:54) at org.opendaylight.controller.cluster.schema.provider.impl.RemoteSchemaProvider$1.onComplete(RemoteSchemaProvider.java:50) at org.opendaylight.controller.cluster.schema.provider.impl.RemoteSchemaProvider$1.onComplete(RemoteSchemaProvider.java:43) at org.apache.pekko.dispatch.OnComplete.internal(Future.scala:309) at org.apache.pekko.dispatch.OnComplete.internal(Future.scala:307) at org.apache.pekko.dispatch.japi$CallbackBridge.apply(Future.scala:234) at org.apache.pekko.dispatch.japi$CallbackBridge.apply(Future.scala:231) at scala.concurrent.impl.Promise$Transformation.run(Promise.scala:484) at org.apache.pekko.dispatch.BatchingExecutor$AbstractBatch.processBatch(BatchingExecutor.scala:73) at org.apache.pekko.dispatch.BatchingExecutor$BlockableBatch.$anonfun$run$1(BatchingExecutor.scala:110) at scala.runtime.java8.JFunction0$mcV$sp.apply(JFunction0$mcV$sp.scala:18) at scala.concurrent.BlockContext$.withBlockContext(BlockContext.scala:94) at org.apache.pekko.dispatch.BatchingExecutor$BlockableBatch.run(BatchingExecutor.scala:110) at org.apache.pekko.dispatch.TaskInvocation.run(AbstractDispatcher.scala:59) at org.apache.pekko.dispatch.ForkJoinExecutorConfigurator$PekkoForkJoinTask.exec(ForkJoinExecutorConfigurator.scala:57) at java.base/java.util.concurrent.ForkJoinTask.doExec(ForkJoinTask.java:387) at java.base/java.util.concurrent.ForkJoinPool$WorkQueue.topLevelExec(ForkJoinPool.java:1312) at java.base/java.util.concurrent.ForkJoinPool.scan(ForkJoinPool.java:1843) at java.base/java.util.concurrent.ForkJoinPool.runWorker(ForkJoinPool.java:1808) at java.base/java.util.concurrent.ForkJoinWorkerThread.run(ForkJoinWorkerThread.java:188) Caused by: org.opendaylight.yangtools.yang.model.repo.api.MissingSchemaSourceException: All available providers exhausted at org.opendaylight.yangtools.yang.model.repo.spi.AbstractSchemaRepository.lambda$fetchSource$0(AbstractSchemaRepository.java:72) at com.google.common.util.concurrent.AbstractCatchingFuture$AsyncCatchingFuture.doFallback(AbstractCatchingFuture.java:207) at com.google.common.util.concurrent.AbstractCatchingFuture$AsyncCatchingFuture.doFallback(AbstractCatchingFuture.java:194) at com.google.common.util.concurrent.AbstractCatchingFuture.run(AbstractCatchingFuture.java:136) ... 24 more Caused by: org.apache.pekko.pattern.AskTimeoutException: Ask timed out on [Actor[pekko://test@127.0.0.1:2552/user/pekko:test@127.0.0.1:2552_device]] after [1000 ms]. Message of type [org.opendaylight.netconf.topology.singleton.messages.YangTextSchemaSourceRequest]. A typical reason for `AskTimeoutException` is that the recipient actor didn't send a reply. 05:40:45,743 AM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message YangTextSchemaSourceRequest [sourceIdentifier=SourceIdentifier [testID]] 05:40:45,752 AM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: getSchemaSource for SourceIdentifier [testID] succeeded 05:40:46,10 AM [test-pekko.actor.default-dispatcher-5] [INFO] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Schema context resolved: [ModuleEffectiveStatementImpl{argument=Unqualified{localName=testID}}] - registering slave mount point 05:40:46,20 AM [test-pekko.actor.default-dispatcher-5] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point registered. 05:40:46,26 AM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Operational state for node Uri{value=device} created: Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=Connected, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]} 05:40:46,27 AM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message org.opendaylight.netconf.topology.singleton.messages.RefreshSlaveActor@30bb97ea 05:40:46,27 AM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-1323374981]] message to master ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] 05:40:47,44 AM [test-pekko.actor.default-dispatcher-5] [WARN] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Failed to send message to ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] - retrying... org.apache.pekko.pattern.AskTimeoutException: Ask timed out on [ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)]] after [1000 ms]. Message of type [org.opendaylight.netconf.topology.singleton.messages.AskForMasterMountPoint]. A typical reason for `AskTimeoutException` is that the recipient actor didn't send a reply. 05:40:47,52 AM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message AskForMasterMountPoint [slaveActorRef=Actor[pekko://test@127.0.0.1:2550/user/$a#-1323374981]] 05:40:47,52 AM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending RegisterMountPoint reply to Actor[pekko://test@127.0.0.1:2550/user/$a#-1323374981] 05:40:47,58 AM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message RegisterMountPoint [allSourceIdentifiers=[SourceIdentifier [testID]], masterActorRef=Actor[pekko://test@127.0.0.1:2552/user/pekko:test@127.0.0.1:2552_device]] 05:40:47,59 AM [test-pekko.actor.default-dispatcher-5] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point unregistered. 05:40:47,61 AM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-1323374981]] message to ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] succeeded 05:40:47,61 AM [test-pekko.actor.default-dispatcher-5] [INFO] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Schema context resolved: [ModuleEffectiveStatementImpl{argument=Unqualified{localName=testID}}] - registering slave mount point 05:40:47,63 AM [test-pekko.actor.default-dispatcher-5] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point registered. 05:40:47,71 AM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending poison pill to Actor[pekko://test/user/$a#-1323374981] 05:40:47,71 AM [test-pekko.actor.default-dispatcher-5] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point unregistered. 05:40:47,84 AM [test-pekko.actor.default-dispatcher-5] [INFO] CoordinatedShutdown - Running CoordinatedShutdown with reason [ActorSystemTerminateReason] 05:40:47,98 AM [test-pekko.actor.default-dispatcher-5] [INFO] LocalActorRef - pekkoDeadLetter Message [org.apache.pekko.cluster.ClusterUserAction$Leave] to Actor[pekko://test/system/cluster/core/daemon#-446283396] was unhandled. [2] dead letters encountered. This logging can be turned off or adjusted with configuration settings 'pekko.log-dead-letters' and 'pekko.log-dead-letters-during-shutdown'. 05:40:47,102 AM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Exiting completed 05:40:47,102 AM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Shutting down... 05:40:47,103 AM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Successfully shut down 05:40:47,109 AM [test-pekko.actor.default-dispatcher-10] [INFO] RemoteActorRefProvider$RemotingTerminator - Shutting down remote daemon. 05:40:47,112 AM [test-pekko.actor.default-dispatcher-5] [INFO] RemoteActorRefProvider$RemotingTerminator - Remote daemon shut down; proceeding with flushing remote transports. 05:40:47,142 AM [test-pekko.actor.default-dispatcher-5] [WARN] Materializer - [outbound connection to [pekko://test@127.0.0.1:2552], message stream] Upstream failed, cause: StreamTcpException: The connection has been aborted 05:40:47,143 AM [test-pekko.actor.default-dispatcher-5] [WARN] Materializer - [outbound connection to [pekko://test@127.0.0.1:2552], control stream] Upstream failed, cause: StreamTcpException: The connection has been aborted 05:40:47,153 AM [test-pekko.actor.default-dispatcher-5] [INFO] RemoteActorRefProvider$RemotingTerminator - Remoting shut down. 05:40:47,177 AM [test-pekko.actor.default-dispatcher-11] [INFO] CoordinatedShutdown - Running CoordinatedShutdown with reason [ActorSystemTerminateReason] 05:40:47,179 AM [test-pekko.actor.default-dispatcher-11] [INFO] LocalActorRef - pekkoDeadLetter Message [org.apache.pekko.cluster.ClusterUserAction$Leave] to Actor[pekko://test/system/cluster/core/daemon#549050446] was unhandled. [2] dead letters encountered. This logging can be turned off or adjusted with configuration settings 'pekko.log-dead-letters' and 'pekko.log-dead-letters-during-shutdown'. 05:40:47,181 AM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Exiting completed 05:40:47,181 AM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Shutting down... 05:40:47,181 AM [test-pekko.actor.default-dispatcher-5] [WARN] Cluster - Could not unregister Cluster JMX MBean with name=pekko:type=Cluster as it was not found. If you are running multiple clusters in the same JVM, set 'pekko.cluster.jmx.multi-mbeans-in-same-jvm = on' in config 05:40:47,181 AM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Successfully shut down 05:40:47,184 AM [test-pekko.actor.default-dispatcher-5] [INFO] RemoteActorRefProvider$RemotingTerminator - Shutting down remote daemon. 05:40:47,184 AM [test-pekko.actor.default-dispatcher-5] [INFO] RemoteActorRefProvider$RemotingTerminator - Remote daemon shut down; proceeding with flushing remote transports. 05:40:48,207 AM [test-pekko.actor.default-dispatcher-10] [INFO] RemoteActorRefProvider$RemotingTerminator - Remoting shut down. 05:40:48,252 AM [test-pekko.actor.default-dispatcher-5] [INFO] Slf4jLogger - Slf4jLogger started 05:40:48,279 AM [test-pekko.actor.default-dispatcher-5] [INFO] ArteryTransport - Remoting started with transport [Artery tcp]; listening on address [pekko://test@127.0.0.1:2550] with UID [-8166178002832642432] 05:40:48,280 AM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Starting up, Pekko version [1.0.3] ... 05:40:48,287 AM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Registered cluster JMX MBean [pekko:type=Cluster] 05:40:48,287 AM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Started up successfully 05:40:48,292 AM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - No downing-provider-class configured, manual cluster downing required, see https://pekko.apache.org/docs/pekko/current/typed/cluster.html#downing 05:40:48,292 AM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - No seed-nodes configured, manual cluster join required, see https://pekko.apache.org/docs/pekko/current/typed/cluster.html#joining 05:40:48,347 AM [test-pekko.actor.default-dispatcher-5] [INFO] Slf4jLogger - Slf4jLogger started 05:40:48,384 AM [test-pekko.actor.default-dispatcher-5] [INFO] ArteryTransport - Remoting started with transport [Artery tcp]; listening on address [pekko://test@127.0.0.1:2552] with UID [2501474454965820728] 05:40:48,385 AM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Starting up, Pekko version [1.0.3] ... 05:40:48,391 AM [test-pekko.actor.default-dispatcher-5] [WARN] Cluster - Could not register Cluster JMX MBean with name=pekko:type=Cluster as it is already registered. If you are running multiple clusters in the same JVM, set 'pekko.cluster.jmx.multi-mbeans-in-same-jvm = on' in config 05:40:48,391 AM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Started up successfully 05:40:48,392 AM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - No downing-provider-class configured, manual cluster downing required, see https://pekko.apache.org/docs/pekko/current/typed/cluster.html#downing 05:40:48,392 AM [test-pekko.actor.default-dispatcher-5] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - No seed-nodes configured, manual cluster join required, see https://pekko.apache.org/docs/pekko/current/typed/cluster.html#joining 05:40:48,433 AM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeManagerTest$TestMasterActor - Actor created TestActor[pekko://test/user/pekko:test@127.0.0.1:2552_device] 05:40:48,433 AM [test-pekko.actor.default-dispatcher-5] [INFO] EmptyLocalActorRef - pekkoDeadLetter Message [org.opendaylight.controller.cluster.common.actor.Monitor] from TestActor[pekko://test/user/pekko:test@127.0.0.1:2552_device] to Actor[pekko://test/user/termination-monitor] was not delivered. [1] dead letters encountered. If this is not an expected behavior then Actor[pekko://test/user/termination-monitor] may have terminated unexpectedly. This logging can be turned off or adjusted with configuration settings 'pekko.log-dead-letters' and 'pekko.log-dead-letters-during-shutdown'. 05:40:48,448 AM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message org.opendaylight.netconf.topology.singleton.messages.CreateInitialMasterActorData@26be2f1b 05:40:48,450 AM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Master is ready. 05:40:48,474 AM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Registering data tree change listener on path DataObjectIdentifier[ @ urn.tbd.params.xml.ns.yang.network.topology.rev131021.NetworkTopology ... network.topology.Topology[TopologyKey{topologyId=Uri{value=topology-netconf}}] ... topology.Node[NodeKey{nodeId=Uri{value=device}}] ] 05:40:48,478 AM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Operational state for node Uri{value=device} created: Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=Connected, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]} 05:40:48,479 AM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeActor - Actor created Actor[pekko://test/user/$a#-927668649] 05:40:48,480 AM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave actor created with name Actor[pekko://test/user/$a#-927668649] 05:40:48,480 AM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-927668649]] message to master ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] 05:40:48,480 AM [test-pekko.actor.default-dispatcher-5] [INFO] EmptyLocalActorRef - pekkoDeadLetter Message [org.opendaylight.controller.cluster.common.actor.Monitor] from Actor[pekko://test/user/$a#-927668649] to Actor[pekko://test/user/termination-monitor] was not delivered. [1] dead letters encountered. If this is not an expected behavior then Actor[pekko://test/user/termination-monitor] may have terminated unexpectedly. This logging can be turned off or adjusted with configuration settings 'pekko.log-dead-letters' and 'pekko.log-dead-letters-during-shutdown'. 05:40:48,538 AM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message AskForMasterMountPoint [slaveActorRef=Actor[pekko://test@127.0.0.1:2550/user/$a#-927668649]] 05:40:48,538 AM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending RegisterMountPoint reply to Actor[pekko://test@127.0.0.1:2550/user/$a#-927668649] 05:40:48,542 AM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message RegisterMountPoint [allSourceIdentifiers=[SourceIdentifier [testID]], masterActorRef=Actor[pekko://test@127.0.0.1:2552/user/pekko:test@127.0.0.1:2552_device]] 05:40:48,544 AM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-927668649]] message to ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] succeeded 05:40:48,547 AM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message YangTextSchemaSourceRequest [sourceIdentifier=SourceIdentifier [testID]] 05:40:48,548 AM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: getSchemaSource for SourceIdentifier [testID] succeeded 05:40:48,562 AM [test-pekko.actor.default-dispatcher-10] [INFO] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Schema context resolved: [ModuleEffectiveStatementImpl{argument=Unqualified{localName=testID}}] - registering slave mount point 05:40:48,563 AM [test-pekko.actor.default-dispatcher-10] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point registered. 05:40:48,570 AM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Operational state for node Uri{value=device} deleted. 05:40:48,570 AM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending message to unregister slave mountpoint to Actor[pekko://test/user/$a#-927668649] 05:40:48,571 AM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message org.opendaylight.netconf.topology.singleton.messages.UnregisterSlaveMountPoint@ca7be54 05:40:48,571 AM [test-pekko.actor.default-dispatcher-5] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point unregistered. 05:40:48,583 AM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Operational state for node Uri{value=device} created: Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=Connected, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]} 05:40:48,584 AM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-927668649]] message to master ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] 05:40:48,584 AM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message org.opendaylight.netconf.topology.singleton.messages.RefreshSlaveActor@61b6b6ed 05:40:48,588 AM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message AskForMasterMountPoint [slaveActorRef=Actor[pekko://test@127.0.0.1:2550/user/$a#-927668649]] 05:40:48,589 AM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending RegisterMountPoint reply to Actor[pekko://test@127.0.0.1:2550/user/$a#-927668649] 05:40:48,592 AM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message RegisterMountPoint [allSourceIdentifiers=[SourceIdentifier [testID]], masterActorRef=Actor[pekko://test@127.0.0.1:2552/user/pekko:test@127.0.0.1:2552_device]] 05:40:48,593 AM [test-pekko.actor.default-dispatcher-5] [INFO] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Schema context resolved: [ModuleEffectiveStatementImpl{argument=Unqualified{localName=testID}}] - registering slave mount point 05:40:48,593 AM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-927668649]] message to ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] succeeded 05:40:48,594 AM [test-pekko.actor.default-dispatcher-5] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point registered. 05:40:48,596 AM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Operational state for node Uri{value=device} updated from Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=Connected, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]} to Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=Connected, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]} 05:40:48,596 AM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message org.opendaylight.netconf.topology.singleton.messages.RefreshSlaveActor@5dffdbf9 05:40:48,597 AM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-927668649]] message to master ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] 05:40:48,599 AM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message AskForMasterMountPoint [slaveActorRef=Actor[pekko://test@127.0.0.1:2550/user/$a#-927668649]] 05:40:48,599 AM [test-pekko.actor.default-dispatcher-11] [DEBUG] NetconfNodeManagerTest$TestMasterActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending RegisterMountPoint reply to Actor[pekko://test@127.0.0.1:2550/user/$a#-927668649] 05:40:48,602 AM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message RegisterMountPoint [allSourceIdentifiers=[SourceIdentifier [testID]], masterActorRef=Actor[pekko://test@127.0.0.1:2552/user/pekko:test@127.0.0.1:2552_device]] 05:40:48,603 AM [test-pekko.actor.default-dispatcher-5] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point unregistered. 05:40:48,603 AM [test-pekko.actor.default-dispatcher-5] [INFO] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Schema context resolved: [ModuleEffectiveStatementImpl{argument=Unqualified{localName=testID}}] - registering slave mount point 05:40:48,603 AM [test-pekko.actor.default-dispatcher-10] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: AskForMasterMountPoint [slaveActorRef=Actor[pekko://test/user/$a#-927668649]] message to ActorSelection[Anchor(pekko://test@127.0.0.1:2552/), Path(/user/pekko:test@127.0.0.1:2552_device)] succeeded 05:40:48,604 AM [test-pekko.actor.default-dispatcher-5] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point registered. 05:40:48,608 AM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Operational state for node Uri{value=device} - subtree modified from Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=Connected, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]} to Node{nodeId=Uri{value=device}, augmentation=[NetconfNodeAugment{netconfNode=NetconfNode{clusteredConnectionStatus=ClusteredConnectionStatus{netconfMasterNode=pekko://test@127.0.0.1:2552}, connectionStatus=UnableToConnect, host=Host{ipAddress=IpAddress{ipv4Address=Ipv4Address{value=127.0.0.1}}}, port=PortNumber{value=9999}}}]} 05:40:48,609 AM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending message to unregister slave mountpoint to Actor[pekko://test/user/$a#-927668649] 05:40:48,609 AM [test-pekko.actor.default-dispatcher-5] [DEBUG] NetconfNodeActor - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: received message org.opendaylight.netconf.topology.singleton.messages.UnregisterSlaveMountPoint@1f83dc5e 05:40:48,609 AM [test-pekko.actor.default-dispatcher-5] [INFO] SlaveSalFacade - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Slave mount point unregistered. 05:40:48,619 AM [main] [DEBUG] NetconfNodeManager - RemoteDeviceId[name=device, address=0.0.0.0/0.0.0.0:65535]: Sending poison pill to Actor[pekko://test/user/$a#-927668649] 05:40:48,621 AM [test-pekko.actor.default-dispatcher-5] [INFO] CoordinatedShutdown - Running CoordinatedShutdown with reason [ActorSystemTerminateReason] 05:40:48,623 AM [test-pekko.actor.default-dispatcher-5] [INFO] LocalActorRef - pekkoDeadLetter Message [org.apache.pekko.cluster.ClusterUserAction$Leave] to Actor[pekko://test/system/cluster/core/daemon#-620333942] was unhandled. [2] dead letters encountered. This logging can be turned off or adjusted with configuration settings 'pekko.log-dead-letters' and 'pekko.log-dead-letters-during-shutdown'. 05:40:48,626 AM [test-pekko.actor.default-dispatcher-10] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Exiting completed 05:40:48,626 AM [test-pekko.actor.default-dispatcher-10] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Shutting down... 05:40:48,626 AM [test-pekko.actor.default-dispatcher-10] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2550] - Successfully shut down 05:40:48,629 AM [test-pekko.actor.default-dispatcher-10] [INFO] RemoteActorRefProvider$RemotingTerminator - Shutting down remote daemon. 05:40:48,629 AM [test-pekko.actor.default-dispatcher-10] [INFO] RemoteActorRefProvider$RemotingTerminator - Remote daemon shut down; proceeding with flushing remote transports. 05:40:48,643 AM [test-pekko.actor.default-dispatcher-10] [WARN] Materializer - [outbound connection to [pekko://test@127.0.0.1:2552], message stream] Upstream failed, cause: StreamTcpException: The connection has been aborted 05:40:48,643 AM [test-pekko.actor.default-dispatcher-10] [WARN] Materializer - [outbound connection to [pekko://test@127.0.0.1:2552], control stream] Upstream failed, cause: StreamTcpException: The connection has been aborted 05:40:48,646 AM [test-pekko.actor.default-dispatcher-10] [INFO] RemoteActorRefProvider$RemotingTerminator - Remoting shut down. 05:40:48,658 AM [test-pekko.actor.default-dispatcher-11] [INFO] CoordinatedShutdown - Running CoordinatedShutdown with reason [ActorSystemTerminateReason] 05:40:48,661 AM [test-pekko.actor.default-dispatcher-10] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Exiting completed 05:40:48,662 AM [test-pekko.actor.default-dispatcher-10] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Shutting down... 05:40:48,662 AM [test-pekko.actor.default-dispatcher-10] [WARN] Cluster - Could not unregister Cluster JMX MBean with name=pekko:type=Cluster as it was not found. If you are running multiple clusters in the same JVM, set 'pekko.cluster.jmx.multi-mbeans-in-same-jvm = on' in config 05:40:48,662 AM [test-pekko.actor.default-dispatcher-10] [INFO] LocalActorRef - pekkoDeadLetter Message [org.apache.pekko.cluster.ClusterUserAction$Leave] to Actor[pekko://test/system/cluster/core/daemon#-649635844] was unhandled. [2] dead letters encountered. This logging can be turned off or adjusted with configuration settings 'pekko.log-dead-letters' and 'pekko.log-dead-letters-during-shutdown'. 05:40:48,662 AM [test-pekko.actor.default-dispatcher-10] [INFO] Cluster - Cluster Node [pekko://test@127.0.0.1:2552] - Successfully shut down 05:40:48,666 AM [test-pekko.actor.default-dispatcher-10] [INFO] RemoteActorRefProvider$RemotingTerminator - Shutting down remote daemon. 05:40:48,666 AM [test-pekko.actor.default-dispatcher-10] [INFO] RemoteActorRefProvider$RemotingTerminator - Remote daemon shut down; proceeding with flushing remote transports. 05:40:49,685 AM [test-pekko.actor.default-dispatcher-10] [INFO] RemoteActorRefProvider$RemotingTerminator - Remoting shut down.