module ietf-ssh-client { yang-version 1.1; namespace "urn:ietf:params:xml:ns:yang:ietf-ssh-client"; prefix sshc; import ietf-netconf-acm { prefix nacm; reference "RFC 8341: Network Configuration Access Control Model"; } import ietf-crypto-types { prefix ct; reference "RFC 9640: YANG Data Types and Groupings for Cryptography"; } import ietf-truststore { prefix ts; reference "RFC 9641: A YANG Data Model for a Truststore"; } import ietf-keystore { prefix ks; reference "RFC 9642: A YANG Data Model for a Keystore"; } import ietf-ssh-common { prefix sshcmn; reference "RFC 9644: YANG Groupings for SSH Clients and SSH Servers"; } organization "IETF NETCONF (Network Configuration) Working Group"; contact "WG Web: https://datatracker.ietf.org/wg/netconf WG List: NETCONF WG list <mailto:netconf@ietf.org> Author: Kent Watsen <mailto:kent+ietf@watsen.net>"; description "This module defines a reusable grouping for SSH clients that can be used as a basis for specific SSH client instances. The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL', 'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED', 'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this document are to be interpreted as described in BCP 14 (RFC 2119) (RFC 8174) when, and only when, they appear in all capitals, as shown here. Copyright (c) 2024 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Revised BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info). This version of this YANG module is part of RFC 9644 (https://www.rfc-editor.org/info/rfc9644); see the RFC itself for full legal notices."; revision 2024-10-10 { description "Initial version."; reference "RFC 9644: YANG Groupings for SSH Clients and SSH Servers"; } // Features feature ssh-client-keepalives { description "SSH keepalive parameters are configurable for SSH clients on the server implementing this feature."; } feature client-ident-publickey { description "Indicates that the 'publickey' authentication type, per RFC 4252, is supported for client identification. The 'publickey' authentication type is required by RFC 4252, but common implementations allow it to be disabled."; reference "RFC 4252: The Secure Shell (SSH) Authentication Protocol"; } feature client-ident-password { description "Indicates that the 'password' authentication type, per RFC 4252, is supported for client identification."; reference "RFC 4252: The Secure Shell (SSH) Authentication Protocol"; } feature client-ident-hostbased { description "Indicates that the 'hostbased' authentication type, per RFC 4252, is supported for client identification."; reference "RFC 4252: The Secure Shell (SSH) Authentication Protocol"; } feature client-ident-none { description "Indicates that the 'none' authentication type, per RFC 4252, is supported for client identification. It is NOT RECOMMENDED to enable this feature."; reference "RFC 4252: The Secure Shell (SSH) Authentication Protocol"; } // Groupings grouping ssh-client-grouping { description "A reusable grouping for configuring an SSH client without any consideration for how an underlying TCP session is established. Note that this grouping uses fairly typical descendant node names such that a nesting of 'uses' statements will have name conflicts. It is intended that the consuming data model will resolve the issue (e.g., by wrapping the 'uses' statement in a container called 'ssh-client-parameters'). This model purposely does not do this itself so as to provide maximum flexibility to consuming models."; container client-identity { nacm:default-deny-write; description "The username and authentication methods for the client. The authentication methods are unordered. Clients may initially send any configured method or, per Section 5.2 of RFC 4252, send the 'none' method to prompt the server to provide a list of productive methods. Whenever a choice amongst methods arises, implementations SHOULD use a default ordering that prioritizes automation over human interaction."; leaf username { type string; description "The username of this user. This will be the username used, for instance, to log into an SSH server."; } container public-key { if-feature "client-ident-publickey"; presence "Indicates that public-key-based authentication has been configured. This statement is present so the mandatory descendant nodes do not imply that this node must be configured."; description "A locally defined or referenced asymmetric key pair to be used for client identification."; reference "RFC 9642: A YANG Data Model for a Keystore"; uses ks:inline-or-keystore-asymmetric-key-grouping { refine "inline-or-keystore/inline/inline-definition" { must 'not(public-key-format) or derived-from-or-self' + '(public-key-format, "ct:ssh-public-key-format")'; } refine "inline-or-keystore/central-keystore/" + "central-keystore-reference" { must 'not(deref(.)/../ks:public-key-format) or derived-' + 'from-or-self(deref(.)/../ks:public-key-format, ' + '"ct:ssh-public-key-format")'; } } } container password { if-feature "client-ident-password"; presence "Indicates that password-based authentication has been configured. This statement is present so the mandatory descendant nodes do not imply that this node must be configured."; description "A password to be used to authenticate the client's identity."; uses ct:password-grouping; } container hostbased { if-feature "client-ident-hostbased"; presence "Indicates that host-based authentication is configured. This statement is present so the mandatory descendant nodes do not imply that this node must be configured."; description "A locally defined or referenced asymmetric key pair to be used for host identification."; reference "RFC 9642: A YANG Data Model for a Keystore"; uses ks:inline-or-keystore-asymmetric-key-grouping { refine "inline-or-keystore/inline/inline-definition" { must 'not(public-key-format) or derived-from-or-self(' + 'public-key-format, "ct:ssh-public-key-format")'; } refine "inline-or-keystore/central-keystore/" + "central-keystore-reference" { must 'not(deref(.)/../ks:public-key-format) or derived-' + 'from-or-self(deref(.)/../ks:public-key-format, ' + '"ct:ssh-public-key-format")'; } } } leaf none { if-feature "client-ident-none"; type empty; description "Indicates that the 'none' algorithm is used for client identification."; } container certificate { if-feature "sshcmn:ssh-x509-certs"; presence "Indicates that certificate-based authentication has been configured. This statement is present so the mandatory descendant nodes do not imply that this node must be configured."; description "A locally defined or referenced certificate to be used for client identification."; reference "RFC 9642: A YANG Data Model for a Keystore"; uses ks:inline-or-keystore-end-entity-cert-with-key-grouping { refine "inline-or-keystore/inline/inline-definition" { must 'not(public-key-format) or derived-from-or-self(' + 'public-key-format, "ct:subject-public-key-info-' + 'format")'; } refine "inline-or-keystore/central-keystore/" + "central-keystore-reference/asymmetric-key" { must 'not(deref(.)/../ks:public-key-format) or derived-' + 'from-or-self(deref(.)/../ks:public-key-format, ' + '"ct:subject-public-key-info-format")'; } } } } // container client-identity container server-authentication { nacm:default-deny-write; must 'ssh-host-keys or ca-certs or ee-certs'; description "Specifies how the SSH client can authenticate SSH servers. Any combination of authentication methods is additive and unordered."; container ssh-host-keys { presence "Indicates that the SSH host key have been configured. This statement is present so the mandatory descendant nodes do not imply that this node must be configured."; description "A bag of SSH host keys used by the SSH client to authenticate SSH server host keys. A server host key is authenticated if it is an exact match to a configured SSH host key."; reference "RFC 9641: A YANG Data Model for a Truststore"; uses ts:inline-or-truststore-public-keys-grouping { refine "inline-or-truststore/inline/inline-definition/public" + "-key" { must 'derived-from-or-self(public-key-format,' + ' "ct:ssh-public-key-format")'; } refine "inline-or-truststore/central-truststore/" + "central-truststore-reference" { must 'not(deref(.)/../ts:public-key/ts:public-key-' + 'format[not(derived-from-or-self(., "ct:ssh-' + 'public-key-format"))])'; } } } container ca-certs { if-feature "sshcmn:ssh-x509-certs"; presence "Indicates that the CA certificates have been configured. This statement is present so the mandatory descendant nodes do not imply that this node must be configured."; description "A set of Certification Authority (CA) certificates used by the SSH client to authenticate SSH servers. A server is authenticated if its certificate has a valid chain of trust to a configured CA certificate."; reference "RFC 9641: A YANG Data Model for a Truststore"; uses ts:inline-or-truststore-certs-grouping; } container ee-certs { if-feature "sshcmn:ssh-x509-certs"; presence "Indicates that the EE certificates have been configured. This statement is present so the mandatory descendant nodes do not imply that this node must be configured."; description "A set of end-entity (EE) certificates used by the SSH client to authenticate SSH servers. A server is authenticated if its certificate is an exact match to a configured end-entity certificate."; reference "RFC 9641: A YANG Data Model for a Truststore"; uses ts:inline-or-truststore-certs-grouping; } } // container server-authentication container transport-params { nacm:default-deny-write; if-feature "sshcmn:transport-params"; description "Configurable parameters of the SSH transport layer."; uses sshcmn:transport-params-grouping; } // container transport-parameters container keepalives { nacm:default-deny-write; if-feature "ssh-client-keepalives"; presence "Indicates that the SSH client proactively tests the aliveness of the remote SSH server."; description "Configures the keepalive policy to proactively test the aliveness of the SSH server. An unresponsive SSH server is dropped after approximately max-wait * max-attempts seconds. Per Section 4 of RFC 4254, the SSH client SHOULD send an SSH_MSG_GLOBAL_REQUEST message with a purposely nonexistent 'request name' value (e.g., keepalive@example.com) and the 'want reply' value set to '1'."; reference "RFC 4254: The Secure Shell (SSH) Connection Protocol"; leaf max-wait { type uint16 { range "1..max"; } units "seconds"; default "30"; description "Sets the amount of time in seconds after which an SSH-level message will be sent to test the aliveness of the SSH server if no data has been received from the SSH server."; } leaf max-attempts { type uint8; default "3"; description "Sets the maximum number of sequential keepalive messages that can fail to obtain a response from the SSH server before assuming the SSH server is no longer alive."; } } // container keepalives } // grouping ssh-client-grouping }