module ietf-yang-patch {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-yang-patch";
prefix "ypatch";
import ietf-restconf { prefix rc; }
organization
"IETF NETCONF (Network Configuration) Working Group";
contact
"WG Web:
WG List:
Author: Andy Bierman
Author: Martin Bjorklund
Author: Kent Watsen
";
description
"This module contains conceptual YANG specifications
for the YANG Patch and YANG Patch Status data structures.
Note that the YANG definitions within this module do not
represent configuration data of any kind.
The YANG grouping statements provide a normative syntax
for XML and JSON message-encoding purposes.
Copyright (c) 2017 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD License
set forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(http://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC 8072; see
the RFC itself for full legal notices.";
revision 2017-02-22 {
description
"Initial revision.";
reference
"RFC 8072: YANG Patch Media Type.";
}
typedef target-resource-offset {
type string;
description
"Contains a data resource identifier string representing
a sub-resource within the target resource.
The document root for this expression is the
target resource that is specified in the
protocol operation (e.g., the URI for the PATCH request).
This string is encoded according to the same rules as those
for a data resource identifier in a RESTCONF request URI.";
reference
"RFC 8040, Section 3.5.3.";
}
rc:yang-data "yang-patch" {
uses yang-patch;
}
rc:yang-data "yang-patch-status" {
uses yang-patch-status;
}
grouping yang-patch {
description
"A grouping that contains a YANG container representing the
syntax and semantics of a YANG Patch edit request message.";
container yang-patch {
description
"Represents a conceptual sequence of datastore edits,
called a patch. Each patch is given a client-assigned
patch identifier. Each edit MUST be applied
in ascending order, and all edits MUST be applied.
If any errors occur, then the target datastore MUST NOT
be changed by the YANG Patch operation.
It is possible for a datastore constraint violation to occur
due to any node in the datastore, including nodes not
included in the 'edit' list. Any validation errors MUST
be reported in the reply message.";
reference
"RFC 7950, Section 8.3.";
leaf patch-id {
type string;
mandatory true;
description
"An arbitrary string provided by the client to identify
the entire patch. Error messages returned by the server
that pertain to this patch will be identified by this
'patch-id' value. A client SHOULD attempt to generate
unique 'patch-id' values to distinguish between
transactions from multiple clients in any audit logs
maintained by the server.";
}
leaf comment {
type string;
description
"An arbitrary string provided by the client to describe
the entire patch. This value SHOULD be present in any
audit logging records generated by the server for the
patch.";
}
list edit {
key edit-id;
ordered-by user;
description
"Represents one edit within the YANG Patch request message.
The 'edit' list is applied in the following manner:
- The first edit is conceptually applied to a copy
of the existing target datastore, e.g., the
running configuration datastore.
- Each ascending edit is conceptually applied to
the result of the previous edit(s).
- After all edits have been successfully processed,
the result is validated according to YANG constraints.
- If successful, the server will attempt to apply
the result to the target datastore.";
leaf edit-id {
type string;
description
"Arbitrary string index for the edit.
Error messages returned by the server that pertain
to a specific edit will be identified by this value.";
}
leaf operation {
type enumeration {
enum create {
description
"The target data node is created using the supplied
value, only if it does not already exist. The
'target' leaf identifies the data node to be
created, not the parent data node.";
}
enum delete {
description
"Delete the target node, only if the data resource
currently exists; otherwise, return an error.";
}
enum insert {
description
"Insert the supplied value into a user-ordered
list or leaf-list entry. The target node must
represent a new data resource. If the 'where'
parameter is set to 'before' or 'after', then
the 'point' parameter identifies the insertion
point for the target node.";
}
enum merge {
description
"The supplied value is merged with the target data
node.";
}
enum move {
description
"Move the target node. Reorder a user-ordered
list or leaf-list. The target node must represent
an existing data resource. If the 'where' parameter
is set to 'before' or 'after', then the 'point'
parameter identifies the insertion point to move
the target node.";
}
enum replace {
description
"The supplied value is used to replace the target
data node.";
}
enum remove {
description
"Delete the target node if it currently exists.";
}
}
mandatory true;
description
"The datastore operation requested for the associated
'edit' entry.";
}
leaf target {
type target-resource-offset;
mandatory true;
description
"Identifies the target data node for the edit
operation. If the target has the value '/', then
the target data node is the target resource.
The target node MUST identify a data resource,
not the datastore resource.";
}
leaf point {
when "(../operation = 'insert' or ../operation = 'move')"
+ "and (../where = 'before' or ../where = 'after')" {
description
"This leaf only applies for 'insert' or 'move'
operations, before or after an existing entry.";
}
type target-resource-offset;
description
"The absolute URL path for the data node that is being
used as the insertion point or move point for the
target of this 'edit' entry.";
}
leaf where {
when "../operation = 'insert' or ../operation = 'move'" {
description
"This leaf only applies for 'insert' or 'move'
operations.";
}
type enumeration {
enum before {
description
"Insert or move a data node before the data resource
identified by the 'point' parameter.";
}
enum after {
description
"Insert or move a data node after the data resource
identified by the 'point' parameter.";
}
enum first {
description
"Insert or move a data node so it becomes ordered
as the first entry.";
}
enum last {
description
"Insert or move a data node so it becomes ordered
as the last entry.";
}
}
default last;
description
"Identifies where a data resource will be inserted
or moved. YANG only allows these operations for
list and leaf-list data nodes that are
'ordered-by user'.";
}
anydata value {
when "../operation = 'create' "
+ "or ../operation = 'merge' "
+ "or ../operation = 'replace' "
+ "or ../operation = 'insert'" {
description
"The anydata 'value' is only used for 'create',
'merge', 'replace', and 'insert' operations.";
}
description
"Value used for this edit operation. The anydata 'value'
contains the target resource associated with the
'target' leaf.
For example, suppose the target node is a YANG container
named foo:
container foo {
leaf a { type string; }
leaf b { type int32; }
}
The 'value' node contains one instance of foo:
some value
42
";
}
}
}
} // grouping yang-patch
grouping yang-patch-status {
description
"A grouping that contains a YANG container representing the
syntax and semantics of a YANG Patch Status response
message.";
container yang-patch-status {
description
"A container representing the response message sent by the
server after a YANG Patch edit request message has been
processed.";
leaf patch-id {
type string;
mandatory true;
description
"The 'patch-id' value used in the request.";
}
choice global-status {
description
"Report global errors or complete success.
If there is no case selected, then errors
are reported in the 'edit-status' container.";
case global-errors {
uses rc:errors;
description
"This container will be present if global errors that
are unrelated to a specific edit occurred.";
}
leaf ok {
type empty;
description
"This leaf will be present if the request succeeded
and there are no errors reported in the 'edit-status'
container.";
}
}
container edit-status {
description
"This container will be present if there are
edit-specific status responses to report.
If all edits succeeded and the 'global-status'
returned is 'ok', then a server MAY omit this
container.";
list edit {
key edit-id;
description
"Represents a list of status responses,
corresponding to edits in the YANG Patch
request message. If an 'edit' entry was
skipped or not reached by the server,
then this list will not contain a corresponding
entry for that edit.";
leaf edit-id {
type string;
description
"Response status is for the 'edit' list entry
with this 'edit-id' value.";
}
choice edit-status-choice {
description
"A choice between different types of status
responses for each 'edit' entry.";
leaf ok {
type empty;
description
"This 'edit' entry was invoked without any
errors detected by the server associated
with this edit.";
}
case errors {
uses rc:errors;
description
"The server detected errors associated with the
edit identified by the same 'edit-id' value.";
}
}
}
}
}
} // grouping yang-patch-status
}