.. _bgp-user-guide-operational-state:
Operational State
=================
The OpenDaylight BGP implementation provides a set of APIs (described below), that give its operational state refreshed periodically, by default every 5 seconds.
The following APIs describe what is available starting with how to change the default refresh rate.
.. contents:: Contents
:depth: 2
:local:
Operational State Configuration
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
**URL:** ``/rests/data/bgp-state-config:bgp-state-config``
**Method:** ``PUT``
.. tabs::
.. tab:: XML
**Content-Type:** ``application/xml``
**Request Body:**
.. code-block:: xml
:linenos:
:emphasize-lines: 3
operationalState
1
@line 3: Time in seconds between operational state update.
.. tab:: JSON
**Method:** ``PUT``
**Content-Type:** ``application/json``
**Request Body:**
.. code-block:: json
:linenos:
:emphasize-lines: 4
{
"bgp-state-config": {
"config-name": "operationalState",
"timer": 1
}
}
@line 4: Time in seconds between operational state update.
BGP RIB Operational State
^^^^^^^^^^^^^^^^^^^^^^^^^
**URL:** ``/rests/data/openconfig-network-instance:network-instances/network-instance=global-bgp/openconfig-network-instance:protocols/protocol=openconfig-policy-types:BGP,bgp-example/bgp/global/state?content=nonconfig``
**Method:** ``GET``
.. tabs::
.. tab:: XML
**Content-Type:** ``application/xml``
**Response Body:**
.. code-block:: xml
:linenos:
:emphasize-lines: 2,3,4,5
65000
192.0.2.2
0
0
@line 2: AS number of the remote peer.
@line 3: The unique protocol instance identifier.
@line 4: Total number of Paths installed on RIB (Loc-RIB)
@line 5: Total number of Prefixes installed on RIB (Loc-RIB)
.. tab:: JSON
**Content-Type:** ``application/json``
**Response Body:**
.. code-block:: json
:linenos:
:emphasize-lines: 3,4,5,6
{
"bgp-openconfig-extensions:state": {
"as": 65000,
"router-id": "192.0.2.2",
"total-paths": 0,
"total-prefixes": 0
}
}
@line 3: AS number of the remote peer.
@line 4: The unique protocol instance identifier.
@line 5: Total number of Paths installed on RIB (Loc-RIB)
@line 6: Total number of Prefixes installed on RIB (Loc-RIB)
BGP RIB Families Operational State
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
**URL:** ``/rests/data/openconfig-network-instance:network-instances/network-instance=global-bgp/openconfig-network-instance:protocols/protocol=openconfig-policy-types:BGP,bgp-example/bgp/global/afi-safis?content=nonconfig``
**Method:** ``GET``
.. tabs::
.. tab:: XML
**Content-Type:** ``application/xml``
**Response Body:**
.. code-block:: xml
:linenos:
:emphasize-lines: 3,5,6
x:IPV4-UNICAST
0
0
x:IPV6-UNICAST
0
0
....
@line 3: Family Identifier.
@line 5: Total number of Paths installed on RIB (Loc-RIB) per specific family.
@line 6: Total number of Prefixes installed on RIB (Loc-RIB) per specific family.
.. tab:: JSON
**Content-Type:** ``application/json``
**Response Body:**
.. code-block:: json
:linenos:
:emphasize-lines: 5,7,8
{
"bgp-openconfig-extensions:afi-safis": {
"afi-safi": [
{
"afi-safi-name": "openconfig-bgp-types:IPV4-UNICAST",
"state": {
"total-paths": 0,
"total-prefixes": 0
},
"afi-safi-name": "openconfig-bgp-types:IPV6-UNICAST",
"state": {
"total-paths": 0,
"total-prefixes": 0
}
}
]
}
}
@line 5: Family Identifier.
@line 7: Total number of Paths installed on RIB (Loc-RIB) per specific family.
@line 8: Total number of Prefixes installed on RIB (Loc-RIB) per specific family.
BGP Neighbors Operational State
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
**URL:** ``/rests/data/openconfig-network-instance:network-instances/network-instance=global-bgp/openconfig-network-instance:protocols/protocol=openconfig-policy-types:BGP,bgp-example/bgp/neighbors?content=nonconfig``
**Method:** ``GET``
.. tabs::
.. tab:: XML
**Content-Type:** ``application/xml``
**Response Body:**
.. code-block:: xml
:linenos:
:emphasize-lines: 3
192.0.2.1
.....
192.0.2.2
.....
@line 3: IP address of the remote BGP peer. Also serves as an unique identifier of a neighbor in a list of neighbors.
.. tab:: JSON
**Content-Type:** ``application/json``
**Response Body:**
.. code-block:: json
:linenos:
:emphasize-lines: 5
{
"bgp-openconfig-extensions:neighbors": {
"neighbor": [
{
"neighbor-address": "192.0.2.1"
},
{
"neighbor-address": "192.0.2.2"
}
]
}
}
@line 5: IP address of the remote BGP peer. Also serves as an unique identifier of a neighbor in a list of neighbors.
BGP Neighbor Operational State
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.. note:: Supported Capabilities only provided when session has been established.
**URL:** ``/rests/data/openconfig-network-instance:network-instances/network-instance=global-bgp/openconfig-network-instance:protocols/protocol=openconfig-policy-types:BGP,bgp-example/bgp/neighbors/neighbor/127.0.0.2/state?content=nonconfig``
**Method:** ``GET``
.. tabs::
.. tab:: XML
**Content-Type:** ``application/xml``
**Response Body:**
.. code-block:: xml
:linenos:
:emphasize-lines: 2,3,4,7,8,11,12
ESTABLISHED
x:ASN32
x:MPBGP
0
0
4
0
@line 2: Session status
@line 3-4: BGP capabilities supported ( ASN32 / MPBGP / ROUTE_REFRESH / GRACEFUL_RESTART / ADD_PATHS)
@line 7: Total count of Update Messages sent
@line 8: Total count of Notification Messages sent
@line 11: Total count of Update Messages received
@line 12: Total count of Notification Messages received
.. tab:: JSON
**Content-Type:** ``application/json``
**Response Body:**
.. code-block:: json
:linenos:
:emphasize-lines: 3,4,7,10,11,14,15
{
"bgp:openconfig-extensions:state": {
"session-state": "ESTABLISHED",
"supported-capabilities": [
"openconfig-bgp-types:ASN32",
"openconfig-bgp-types:MPBGP"
],
"messages": {
"sent": {
"UPDATE": 0,
"NOTIFICATION": 0
},
"received": {
"UPDATE": 4,
"NOTIFICATION": 0
}
}
}
}
@line 3: Session status
@line 4-7: BGP capabilities supported ( ASN32 / MPBGP / ROUTE_REFRESH / GRACEFUL_RESTART / ADD_PATHS)
@line 10: Total count of Update Messages sent
@line 11: Total count of Notification Messages sent
@line 14: Total count of Update Messages received
@line 15: Total count of Notification Messages received
BGP Neighbor Families Operational State
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
**URL:** ``/rests/data/openconfig-network-instance:network-instances/network-instance=global-bgp/openconfig-network-instance:protocols/protocol=openconfig-policy-types:BGP,bgp-example/bgp/neighbors/neighbor/192.0.2.1/afi-safis?content=nonconfig``
**Method:** ``GET``
.. tabs::
.. tab:: XML
**Content-Type:** ``application/xml``
**Response Body:**
.. code-block:: xml
:linenos:
:emphasize-lines: 3,5,7,9,10,11,12,13
x:IPV4-UNICAST
false
true
true
true
180
true
x:IPV6-UNICAST
false
true
true
true
100
true
@line 3: Family Identifier.
@line 5: True if family is advertized by peer.
@line 7: Graceful Restart Operational State per specific family.
@line 9: True if the peer supports graceful restart.
@line 10: True if peer supports Long-Lived graceful restart.
@line 11: True if we supports Long-Lived graceful restart.
@line 12: Value of Long-Lived stale timer in seconds for specific family
@line 13: True if we support graceful restart.
.. tab:: JSON
**Content-Type:** ``application/json``
**Response Body:**
.. code-block:: json
:linenos:
:emphasize-lines: 5,7,9,11,12,13,14,15
{
"bgp-openconfig-extensions:afi-safis": {
"afi-safi": [
{
"afi-safi-name": "openconfig-bgp-types:IPV4-UNICAST",
"state": {
"active": false
},
"graceful-restart": {
"state": {
"received": true,
"ll-received": true,
"ll-advertised": true,
"ll-stale-timer": 180,
"advertised": true
}
}
},
{
"afi-safi-name": "openconfig-bgp-types:IPV6-UNICAST",
"state": {
"active": false
},
"graceful-restart": {
"state": {
"received": true,
"ll-received": true,
"ll-advertised": true,
"ll-stale-timer": 100,
"advertised": true
}
}
}
]
}
}
@line 5: Family Identifier.
@line 7: True if family is advertized by peer.
@line 9: Graceful Restart Operational State per specific family.
@line 11: True if the peer supports graceful restart.
@line 12: True if peer supports Long-Lived graceful restart.
@line 13: True if we supports Long-Lived graceful restart.
@line 14: Value of Long-Lived stale timer in seconds for specific family
@line 15: True if we support graceful restart.
BGP Neighbor Family Operational State
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.. note:: Prefixes state is only provided once session is established.
**URL:** ``/rests/data/openconfig-network-instance:network-instances/network-instance=global-bgp/openconfig-network-instance:protocols/protocol=openconfig-policy-types:BGP,bgp-example/bgp/neighbors/neighbor/192.0.2.1/afi-safis/afi-safi=openconfig-bgp-types:IPV4%2DUNICAST?content=nonconfig``
**Method:** ``GET``
.. tabs::
.. tab:: XML
**Content-Type:** ``application/xml``
**Response Body:**
.. code-block:: xml
:linenos:
:emphasize-lines: 2,4,6,7,8
x:IPV4-UNICAST
true
3
0
3
true
true
true
180
true
@line 2: Family Identifier.
@line 4: True if family is advertized to and by peer.
@line 6: Total count of prefixes advertized by peer and installed (effective-rib-in).
@line 7: Total count of prefixes advertized to peer (adj-rib-out).
@line 8: Total count of prefixes advertized by peer (adj-rib-in).
.. tab:: JSON
**Content-Type:** ``application/json``
**Response Body:**
.. code-block:: json
:linenos:
:emphasize-lines: 3,5,8,9,10
{
"bgp-openconfig-extensions:afi-safi": [
{
"afi-safi-name": "openconfig-bgp-types:IPV4-UNICAST",
"state": {
"active": true,
"prefixes": {
"installed": 3,
"sent": 0 ,
"received": 3
}
},
"graceful-restart": {
"state": {
"received": true,
"ll-received": true,
"ll-advertised": true,
"ll-stale-timer": 180,
"advertised": true
}
}
}
]
}
@line 3: Family Identifier.
@line 5: True if family is advertized to and by peer.
@line 8: Total count of prefixes advertized by peer and installed (effective-rib-in).
@line 9: Total count of prefixes advertized to peer (adj-rib-out).
@line 10: Total count of prefixes advertized by peer (adj-rib-in).
BGP Neighbor Timers Operational State
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.. note:: State is only provided once session is established.
**URL:** ``/rests/data/openconfig-network-instance:network-instances/network-instance=global-bgp/openconfig-network-instance:protocols/protocol=openconfig-policy-types:BGP,bgp-example/bgp/neighbors/neighbor/192.0.2.1/timers?content=nonconfig``
**Method:** ``GET``
.. tabs::
.. tab:: XML
**Content-Type:** ``application/xml``
**Response Body:**
.. code-block:: xml
:linenos:
:emphasize-lines: 3,4
180
1580676
@line 3: The negotiated hold-time for the BGP session in seconds.
@line 4: Session duration since establishment in timeticks (hundredths of a second).
.. tab:: JSON
**Content-Type:** ``application/json``
**Response Body:**
.. code-block:: json
:linenos:
:emphasize-lines: 4,5
{
"bgp:openconfig-extensions:timers": {
"state": {
"negotiated-hold-time": 180,
"uptime": 1580676
}
}
}
@line 4: The negotiated hold-time for the BGP session in seconds.
@line 5: Session duration since establishment in timeticks (hundredths of a second).
BGP Neighbor Transport Operational State
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.. note:: State is only provided once session is established.
**URL:** ``/rests/data/openconfig-network-instance:network-instances/network-instance=global-bgp/openconfig-network-instance:protocols/protocol=openconfig-policy-types:BGP,bgp-example/bgp/neighbors/neighbor/192.0.2.1/transport?content=nonconfig``
**Method:** ``GET``
.. tabs::
.. tab:: XML
**Content-Type:** ``application/xml``
**Response Body:**
.. code-block:: xml
:linenos:
:emphasize-lines: 3,4,5
127.0.0.2
44718
1790
@line 3: IP address of the remote BGP peer.
@line 4: Port of the remote BGP peer.
@line 5: Local port.
.. tab:: JSON
**Content-Type:** ``application/json``
**Response Body:**
.. code-block:: json
:linenos:
:emphasize-lines: 4,5,6
{
"bgp:openconfig-extensions:transport": {
"state": {
"remote-address": "127.0.0.2",
"remote-port": 44718,
"local-port": 1790
}
}
}
@line 4: IP address of the remote BGP peer.
@line 5: Port of the remote BGP peer.
@line 6: Local port.
BGP Neighbor Error Handling Operational State
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.. note:: State is only provided once session is established.
.. note:: Error handling not supported yet. Planned for Carbon.
**URL:** ``/rests/data/openconfig-network-instance:network-instances/network-instance=global-bgp/openconfig-network-instance:protocols/protocol=openconfig-policy-types:BGP,bgp-example/bgp/neighbors/neighbor/192.0.2.1/error-handling?content=nonconfig``
**Method:** ``GET``
.. tabs::
.. tab:: XML
**Content-Type:** ``application/xml``
**Response Body:**
.. code-block:: xml
:linenos:
:emphasize-lines: 3
0
@line 3: The number of BGP UPDATE messages for which the treat-as-withdraw mechanism has been applied based on
erroneous message contents
.. tab:: JSON
**Content-Type:** ``application/json``
**Response Body:**
.. code-block:: json
:linenos:
:emphasize-lines: 4
{
"bgp-openconfig-extensions:error-handling": {
"state": {
"erroneous-update-messages": 0
}
}
}
@line 4: The number of BGP UPDATE messages for which the treat-as-withdraw mechanism has been applied based on
erroneous message contents
BGP Neighbor Graceful Restart Operational State
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.. note:: Graceful Restart not supported yet. Planned for Carbon.
**URL:** ``/rests/data/openconfig-network-instance:network-instances/network-instance=global-bgp/openconfig-network-instance:protocols/protocol=openconfig-policy-types:BGP,bgp-example/bgp/neighbors/neighbor/192.0.2.1/graceful-restart?content=nonconfig``
**Method:** ``GET``
.. tabs::
.. tab:: XML
**Content-Type:** ``application/xml``
**Response Body:**
.. code-block:: xml
:linenos:
:emphasize-lines: 3,4,5,6
false
false
5
BILATERAL
@line 3: This flag indicates whether the remote neighbor is currently in the process of restarting, and hence
received routes are currently stale.
@line 4: This flag indicates whether the local neighbor is currently restarting. The flag is unset after all NLRI
have been advertised to the peer, and the End-of-RIB (EOR) marker has been unset.
@line 5: The period of time (advertised by the peer) in seconds that the peer expects a restart of a BGP session to take.
@line 6: Mode of Graceful Restart operation, depending on family support advertising to peer and receiving from peer can be HELPER-ONLY (only remote peers support some families), REMOTE-HELPER (only we advertise support), BILATERAL (two-side support).
.. tab:: JSON
**Content-Type:** ``application/json``
**Response Body:**
.. code-block:: json
:linenos:
:emphasize-lines: 4,5,6,7
{
"bgp-openconfig-extensions:graceful-restart": {
"state": {
"peer-restarting": false,
"local-restarting": false,
"peer-restart-time": 0,
"mode": "HELPER-ONLY"
}
}
}
@line 4: This flag indicates whether the remote neighbor is currently in the process of restarting, and hence
received routes are currently stale.
@line 5: This flag indicates whether the local neighbor is currently restarting. The flag is unset after all NLRI
have been advertised to the peer, and the End-of-RIB (EOR) marker has been unset.
@line 6: The period of time (advertised by the peer) in seconds that the peer expects a restart of a BGP session to take.
@line 7: Mode of Graceful Restart operation, depending on family support advertising to peer and receiving from peer can be HELPER-ONLY (only remote peers support some families), REMOTE-HELPER (only we advertise support), BILATERAL (two-side support).
BGP Peer Groups Operational State
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
**URL:** ``/rests/data/openconfig-network-instance:network-instances/network-instance=global-bgp/openconfig-network-instance:protocols/protocol=openconfig-policy-types:BGP,bgp-example/peer-groups?content=nonconfig``
**Method:** ``GET``
.. tabs::
.. tab:: XML
**Content-Type:** ``application/xml``
**Response Body:**
.. code-block:: xml
:linenos:
:emphasize-lines: 3,5,6
application-peers
0
0
@line 3: Peer Group Identifier.
@line 5: At this moment the cost for count path under effect-rib-in is to high. Therefore the value is the same as total prefixes.
@line 6: Total Prefixes installed under by peers pertaining to this peer group (effective-rib-in).
This count doesn't differentiate repeated prefixes.
.. tab:: JSON
**Content-Type:** ``application/json``
**Response Body:**
.. code-block:: json
:linenos:
:emphasize-lines: 4,6,7
{
"peer-groups": {
"peer-group": {
"peer-group-name": "application-peers",
"state": {
"total-paths": 0,
"total-prefixes": 0
}
}
}
}
@line 4: Peer Group Identifier.
@line 6: At this moment the cost for count path under effect-rib-in is to high. Therefore the value is the same as total prefixes.
@line 7: Total Prefixes installed under by peers pertaining to this peer group (effective-rib-in).
This count doesn't differentiate repeated prefixes.
CLI
---
BGP Karaf Console (odl-bgpcep-bgp-cli) provides a CLI feature to read operational state per RIB, Neighbor and Peer Group.
.. code-block:: bash
:linenos:
opendaylight-user@root> bgp:operational-state -rib example-bgp-rib
.. code-block:: bash
:linenos:
opendaylight-user@root> bgp:operational-state -rib example-bgp-rib -neighbor 192.0.2.1
.. code-block:: bash
:linenos:
opendaylight-user@root> bgp:operational-state -rib -peer-group application-peers